Seat trouble
The front seats in most vehicles have become over complicated with airbags, seatbelt tensioners and lumbar support mechanisms, not to mention various cables for adjustment and electric motors. Consequently, many are expensive to replace and seemingly beyond the scope of DIY repairs, or are they? To find out what can be stripped and repaired, the following pages provide an overview of the general procedures in removing the trim, seat covers and other components to be able to repair or replace broken parts.
Most of the photographs show the front seats from an MGF/TF, but we’ve noticed similarities with other models. The seat covers for example, are usually secured to the framework with plastic edging strips, metal hog rings and metal clips. The hog rings can be quite sharp, so investing in a pair of hog ring pliers or a good quality pair of side cutters will save on cut fingers.
We’ve also followed the stripdown of a driver’s seat from a BMW MINI R50 (2001-2006 models) with independent MINI and BMW specialist MJR Minimatt. If such a seat won’t recline, lock, or if it feels wobbly, then the internals of the seat frame may have broken. This is a common problem and usually caused by a broken cable if the seat tilts but doesn’t slide, or a broken part of the seat frame if it doesn’t recline, tilt, lock
You’re reading a preview, subscribe to read more.
Start your free 30 days