Nekoi
Iq
Dona
PCr me Me Te i at
eer Menten wo Kater
IPNet - RB
Anti-Corrosive Protective Coating System For Reinforcement Bars
(CBRI/ CSIR Technology)
‘TYPICALAPPLICATIONS
+ As protective, anti-corrosive coating to
rebar in the construction of RCC
strucures exposed to aggressive corrosion,
to enhance the durability.
Essential for Pile Cages of pile foundations
in Marine structures, Jetties, Retaining walls,
Bridges, Culverts, Industrial structures,
Sewerage & Effluent Treatment Plants, etc.
As anti-corrosive coating to exposed
reinforcement bars in embedded conerete
(after thorough de-rusting with wire
brushes) in repair works.
APPLICATIONS PROCEDURE,
Surface Preparation : De-rust the steel using
mechanical, circular wire brushes and with
application of alkaline rust convertor.
Sandblasting/shotblasting is the effective
‘method of surface preparation priorto IPNet-RB
application, where large quantities of rebar are
to be coated.
Unit # 2, Bldg., 6, Sect. 6, Millennium BusinessPark,
Mahape, Navi Mumbai - 400 710.
Tol. 1022-2778 2923/24 * Fax: 022-2778 2608
e-mail: nfo@krishnaconchem.com
vww.ktishnaconchem.com
APPLICATION : Mix IPNet - RB
Part-A and Part-B in the prescribed
proportions by volume for five minutes
thoroughly and allow it to remain in the
container for five minutes. Apply using
brush in two coats keeping an interval of
minimum 6 hours between the coats.
CURING : The coated rebars are to be
allowed to cure in air for minimum 48 hours.
In case of embedded bars (in repairs)
allow 24 hours before application of
repair material,
‘TECHNICAL DATA
Base : Epoxy / Phenolic
Mix Proporation:Base : Curing Agent
(Byvolume) 1:1
Appearance _: Yellow
Pot Life
Coverage
+: 60 minutes for 1 It. mix
+ Approx. 18 It. -20 It. for
1 ton rebars of 20 mm
dia, 6-7 sq, mt/ It/coat
Curing + 48 hours in air at 25°C
Shelf Life : Lyear ina sealed
container
+ Ilt., 10 Its. & 40 Its.
: Thinner T-50
Packing
Cleaning
Diacaimar: Ths rfomaton, gvenln good
faith, ig based on resuls gained from