100% found this document useful (1 vote)
402 views6 pages

POCcelerator Setup Guide

To set up the POCcelerator interface on the AFIAS-6 analyzer, enter supervisor mode by going to the history tab and entering #*supervisor#, then tap the top right corner to access the system configuration menu. From there, select LIS configuration to set the LIS data management system by configuring the server IP address and port in the network information settings.

Uploaded by

Johnny Tello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
402 views6 pages

POCcelerator Setup Guide

To set up the POCcelerator interface on the AFIAS-6 analyzer, enter supervisor mode by going to the history tab and entering #*supervisor#, then tap the top right corner to access the system configuration menu. From there, select LIS configuration to set the LIS data management system by configuring the server IP address and port in the network information settings.

Uploaded by

Johnny Tello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AFIAS-6

How to setup the POCcelerator interface


AFIAS-6 ➔ LIS POCcelerator - Setup

Set LIS data management


The popup will appear Supervisor mode POCcelerator + Apply
1. Go to History Tab system
2. Enter #*supervisor#
AFIAS-6 ➔ LIS POCcelerator - Setup

System Configuration menu LIS configuration


Tap the top right Configure the network information
corner of the screen - Sever IP address
- Port
AFIAS-1
How to setup the POCcelerator interface
AFIAS-1 ➔ LIS POCcelerator - Setup

Set LIS data management


The popup will appear Supervisor mode POCcelerator + Apply
1. Go to History Tab system
2. Enter #*supervisor#
AFIAS-1 ➔ LIS POCcelerator - Setup

System Configuration menu LIS configuration


Tap the top right Configure the network information
corner of the screen - Sever IP address
- Port

You might also like