0 ratings0% found this document useful (0 votes) 84 views4 pagesChart Pattern Double Top
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content,
claim it here.
Available Formats
Download as PDF or read online on Scribd
- Upgrade
©. Find an answer }
Help Center / Indicators / Chart Patterns / Chart Pattern Do...
Chart Pattern Double Top
Please note that the information about expected price targets provided by
Auto Chart Patterns isn’t a recommendation for what you should personally
do. Do not take this data as investment advice. It should only be used for
education and research, As with any trade, always look first and then leap.
Double top is a reversal pattern formed by two consecutive highs that are at
the same level (slight difference in values is allowed) and an intermediate
low between them. It is expected that after the price again reaches the level
of the first high and then reverses and falls below the level of theintermediate low, the fall will continue further by about the difference
between the highs and the low.
The indicator searches for patterns on the last 600 bars. The pattern consists
of lines indicating price movements (Price Line) and neck lines (Neck Line).
The neck tine is a horizontal line drawn through the intermediate minimum.
The start and end points of each price line, except for the last one (point 5),
are located in 5/5 pivots. Point 5 is located at the intersection of the last
price line with the neck line. In the In Progress mode, the indicator looks for
not only formed, but also emerging patterns. The second peak of such a
pattern may not be in the pivot, and the price lines that form it will be
dotted.The pattern is considered formed when, after the appearance of the second
peak, the price (close) falls below the neckline. The dotted horizontal line
that ends with the Target label indicates the expected price level after the
pattern has formed. As new bars appear, the line extends to the right until
the last bar, until the pattern status changes from Awaiting to another. The
label tooltip shows the price and the current status of the pattern. When the
status changes, the color of the label also changes. There are 4 statuses in
total:
+ Awaiting. The price did not reach the expected level and did not go
above the second top.
* Reached. The price reached the expected level.
* Failed. The price did not reach the expected level and went above the
second top.
+ Indefinable. The indicator cannot unambiguously determine the status
of the patterns.
If the indicator finds two intersecting patterns, then preference is given to
the one whose status is Awaiting. If the status of the intersecting patterns is
Failed or Reached or the status of both is Awaiting, then the pattern will be
displayed on the chart, in which the price values of the vertices are the mostsimilar, i.e., more accurate. A pattern with the Indefinable status is deleted
if it intersects with a pattern that has a different status.
Alerts:
New Pattern. It is triggered when a new pattern appears on the chart. A
pattern is considered new if it has a different position of the first top or
the intermediate minimum.
Pattern Formed. It is triggered when, after the appearance of the
second top, a bar appears that has closed below the neckline.
Inputs:
Patterns - Defines which pattern will be drawn depending on its status.
Possible values: All, Awaiting and Reached, Only Awaiting, Last
Awaiting. If Last Awaiting is selected, only one pattern with the
Awaiting status will be displayed, the first point of which is located to
the right of all the others.
Price Targets - Defines which price targets will be drawn depending
status of the pattern. Possible values: All, Only Awaiting, Awaiting and
Reached, None.
Trend Height - Sets the required height of the trend preceding the
pattern relative to the height of the pattern itself. The height of the
pattern is the difference in price between the maximum of the tops and
the intermediate minimum. Percent value.
Second Top - Determines which patterns to display with respect to
whether the second top of the first top is above Higher or below Lower.
If Both is selected, all patterns will be displayed.
Permissible Deviation - The maximum allowable difference in tops
heights. The height of the top is calculated from the intermediate
minimum. Percent value.
In Progress - Search for patterns that have not been fully formed yet.
Was this solution helpful?