0% found this document useful (0 votes)
329 views1 page

ECO Rail Datasheet

The ECO-Rail is a component designed for Clenergy's PV Mounting System, with dimensions of W32.6mm and H50.7mm, available in standard lengths ranging from 2100mm to 4400mm. It is made of AL6005-T5 material, weighs 0.826kg/m, and features a silver anodized finish with corrosion protection rated up to C5. The product comes with a warranty for anodized ECO-Rails, with specific interface spacing reductions required for high corrosive environments.

Uploaded by

Huy Phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
329 views1 page

ECO Rail Datasheet

The ECO-Rail is a component designed for Clenergy's PV Mounting System, with dimensions of W32.6mm and H50.7mm, available in standard lengths ranging from 2100mm to 4400mm. It is made of AL6005-T5 material, weighs 0.826kg/m, and features a silver anodized finish with corrosion protection rated up to C5. The product comes with a warranty for anodized ECO-Rails, with specific interface spacing reductions required for high corrosive environments.

Uploaded by

Huy Phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ECO-Rail

Component

ECO-Rail
Part No.: ER-R-ECO/XXXX

Technical Specification
Roof type For Clenergy' s PV Mounting System
Dimension W32.6mm*H50.7mm
Standard Length: 2100, 3150, 3600, 4200 and
4400mm
Packaging 90 pcs per pack; 4 packs (360 pcs) per pallet
Weight 0.826kg/m
Material AL6005-T5
Color Silver (Anodized no less than 10 μm)
Standard AS/NZS 1170.2.
Corrosion Protection Up to C5*

Warranty Terms
Warranty is valid for all anodized ECO-Rail
*To maintain structural integrity of ECO-Rail through design life of 25 years, high corrosive C4 location require a 5%
interface spacing reduction & C5 locations require a 25% interface reduction.

@ClenergyGlobal @ClenergyClub @ClenergyAUS @Clenergy @ClenergyClub @Clenergy_global

E: tech@clenergy.com.au | W: www.clenergy.com.au A Clenergy Technologies Company | 160922 V2.1

You might also like