Professional Documents
Culture Documents
Basic Mobile communication structure mobile communication is location independent (personal) communicationmore or less possible
mobility depends on network coverage range of wireless access availability and reach ability of access points Rule of thumb: The more mobile, the more expensive
Aspects of mobility:
User mobility: users communicate (wireless) anytime, anywhere, with anyone Device portability: devices can be connected anytime, anywhere to the network
Examples stationary computer notebook in a hotel wireless LANs in historic buildings Personal Digital Assistant (PDA)
WLAN(Local Area Network) It provides wireless network communication over short distances using radio or infrared signals instead of traditional network cabling.
Standard: IEEE 802.11 Technology: WiFi
WPAN(Personal Area Network) A wireless personal area network (WPAN for short) is a low-range wireless network which covers an area of only a few dozen metres.
Standard: IEEE 802.15 Technology: Bluetooth Examples of wireless access technology Examples of wireless access technology which can be seen under the aspect of mobility: o terrestrial cellular networks, e.g. GSM, UMTS, CDMA2000, ... o wireless LAN 802.11a,b,g,n o WiMAX 802.16 o Bluetooth o satellite communication, o trunked radio, e.g. TETRA The demand for mobile communication creates the need for integration of wireless networks into existing fixed networks: local area networks: standardization of IEEE 802.11, ETSI (HIPERLAN) Internet: Mobile IP extension of the internet protocol IP wide area networks: e.g., internetworking of GSM and ISDN
ApplicationsVehicles transmission of news, road condition, weather, music via DAB personal communication using GSM position via GPS local ad-hoc network with vehicles close-by to prevent accidents, guidance system, redundancy vehicle data (e.g., from busses, high-speed trains) can be transmitted in advance for maintenance Emergencies early transmission of patient data to the hospital, current status, first diagnosis replacement of a fixed infrastructure in case of earthquakes, hurricanes, fire etc. crisis, war, ... Typical application: road traffic
Travelling salesmen direct access to customer files stored in a central location consistent databases for all agents mobile office Replacement of fixed networks remote sensors, e.g., weather, earth activities flexibility for trade shows LANs in historic buildings Entertainment, education, ... outdoor Internet access intelligent travel guide with up-to-date location dependent information ad-hoc networks for multi user games Location dependent services Location aware services
what services, e.g., printer, fax, phone, server etc. exist in the local environment Follow-on services automatic call-forwarding, transmission of the actual workspace to the current location Information services push: e.g., current special offers in the supermarket pull: e.g., where is the Black Forrest Cherry Cake? Support services caches, intermediate results, state information etc. follow the mobile device through the fixed network Privacy who should gain knowledge about the location Mobile devices Pager receive only tiny displays simple text messages PDA simple graphical displays character recognition simplified WWW Laptop fully functional standard applications Mobile phones voice, data simple text displays Palmtop tiny keyboard simple versions of standard applications Effects of device portability Power consumption limited computing power, low quality displays, small disks due to limited battery capacity CPU: power consumption ~ CV2f C: internal capacity, reduced by integration V: supply voltage, can be reduced to a certain limit f: clock frequency, can be reduced temporally Loss of data higher probability, has to be included in advance into the design (e.g., defects, theft) Limited user interfaces compromise between size of fingers and portability integration of character/voice recognition, abstract symbols Limited memory limited value of mass memories with moving parts flash-memory or as alternative
Wireless networks in comparison to fixed networks Higher loss-rates due to interference emissions of, e.g., engines, lightning,Restrictive regulations of frequencies frequencies have to be coordinated, useful frequencies are almost all occupied Low transmission rates regional currently, e.g., 9.6kbit/s with GSM Higher delays, higher jitter connection setup time with GSM in the second range, several hundred milliseconds for other wireless systems ,Lower security, simpler active attacking radio interface accessible for everyone, base station can be simulated, thus attracting calls from mobile phones ,Always shared medium secure access mechanisms important
Application layer service location new applications, multimedia adaptive applications Transport layer congestion and flow control quality of service Network layer addressing, routing, device location hand-over Data link layer authentication media access multiplexing media access control Physical layer encryption modulation interference attenuation frequency
Overlay Networks (computer network which is built on the top of another network)- the global goal
rate. The number of cellular telephone users grew from 25000 in 1984 to around 3 billion in the year 2007 and the demand rate is increasing day by day. Present Day Mobile Communication Since the time of wireless telegraphy, radio communication has been used extensively.Our society has been looking for acquiring mobility in communication since then.Initially the mobile communication was limited between one pair of users on single channel pair. The range of mobility was defined by the transmitter power, type of antenna used and the frequency of operation. With the increase in the number of users, accommodating them within the limited available frequency spectrum became a major problem. To resolve this problem, the concept of cellular communication was evolved. The present day cellular communication uses a basic unit called cell. Each cell consists of small hexagonal area with a base station located at the center of the cell which communicates with the user. To accommodate multiple users Time Division multiple Access (TDMA), Code Division Multiple Access (CDMA),Frequency Division Multiple Access (FDMA) and their hybrids are used.. Radio Transmission Techniques
Based on the type of channels being utilized, mobile radio transmission systems may be classified as the following three categories . 1.Simplex System: Simplex systems utilize simplex channels i.e., the communication is unidirectional. The first user can communicate with the second user. However, the second user cannot communicate with the first user. 2. Half Duplex System: Half duplex radio systems that use half duplex radio channels allow for nonsimultaneous bidirectional communication. The first user can communicate with the second user but the second user can communicate to the first user only after the first user has finished his conversation. At a time, the user can only transmit or receive information. 3.0Full Duplex System: Full duplex systems allow two way simultaneous communications. Both the users can communicate to each other simultaneously. This can be done by providing two simultaneous but separate channels to both the users. This is possible by one of the two following methods. Frequency Division Duplexing (FDD): FDD supports two-way radio communication by using two distinct radio channels. One frequency channel is transmitted downstream from the BS to the MS (forward channel).
Time Division Duplexing (TDD): TDD uses a single frequency band to transmit signals in both the downstream and upstream directions.TDD operates by toggling transmission directions over a time interval. This toggling takes place very rapidly and is imperceptible to the user.
How a Mobile Call is Actually Made? Operational Channels In each cell, there are four types of channels that take active part during a mobile call. These are: 1. Forward Voice Channel (FVC): This channel is used for the voice transmission from the BS to the MS. 2. Reverse Voice Channel (RVC): This is used for the voice transmission from the MS to the BS. 3. Forward Control Channel (FCC): Control channels are generally used for controlling the activity of the call, i.e., they are used for setting up calls and to divert the call to unused voice channels. 4.Reverse Control Channel (RCC): This is used for the call control purpose from the MS to the BS. Control channels are usually monitored by mobiles.
Making a Call When a mobile is idle, i.e., it is not experiencing the process of a call, then it searches all the FCCs to determine the one with the highest signal strength. The mobile then monitors this particular FCC. However, when the signal strength falls below a particular threshold that is insu_cient for a call to take place, the mobile again searches all the FCCs for the one with the highest signal strength. For a particular country or continent, the control channels will be the same. So all mobiles in that country or continent will search among the same set of control channels. However,when a mobile moves to a different country or continent, then the control channels or that particular location will be different and hence the mobile will not work. Each mobile has a mobile identification number (MIN). When a user wants to make a call, he sends a call request to the MSC on the reverse control channel. He also sends the MIN of the person to whom the call has to be made. The MSC then sends this MIN to all the base stations. The base station transmits this MIN and all the mobiles within the coverage area of that base station receive the MIN and match it with their own. If the MIN matches with a particular MS, that mobile sends an acknowledgment to the BS. The BS then informs the MSC that the mobile is within its coverage area. The MSC then instructs the base station to access specific unused voice channel pair. The base station then sends a message to the mobile to move to the particular channels and it also sends a signal to the mobile for ringing. Future Trends Tremendous changes are occurring in the area of mobile radio communications, so much so that the mobile phone of yesterday is rapidly turning into a sophisticated mobile device capable of more applications than PCs were capable of only a few years ago. Rapid development of the Internet with its new services and applications has created fresh challenges for the further development of mobile communication systems. Further enhancements in modulation schemes will soon increase the Internet access rates on the mobile from current 1.8 Mbps to greater than 10 Mbps.Bluetooth is rapidly becoming a common feature in mobiles for local connections. The mobile communication has provided global connectivity to the people at a lower cost due to advances in the technology and also because of the growing competition among the service providers.
as transparent to the user as possible) and the availability of high speed reliable data services along with high quality voice. A range of successful mobile technologies exists today in various parts of the world and every technology must evolve to fulfill all these requirements. simplifies and revolutionizes communication. Recent developments and initiatives include: GSM Association together with the Universal Wireless Communications Consortium (UWCC), which represents the interests of the TDMA community, are working towards inter-standard roaming between GSM and TDMA (ANSI-136) networks. The majority of European GSM operators plan to implement general packet radio system (GPRS) technology as their network evolution path to third-generation. GSM cordless telephony system to provide a small home base station to work with a standard GSM mobile phone in similar mode to a cordless phone. The base station would be connected to the PSTN. Number portability will allow customers to retain their mobile numbers when they change operators or service providers. Location services to standardize the methods for determining a GSM
The drive for 3G is the need for higher capacities and higher data rates. Whereas higher capacities
can basically be obtained by having a greater chunk of spectrum or by using new evolved air interfaces, the data requirements can be served to a certain extent by overlaying 2.5G technologies on the existing networks. In many cases it is possible to provide higher speed packet data by adding few network elements and a software upgrade. A Look At GPRS, HCSD, and EDGE Technologies like GPRS (General Packet Radio Service), High Speed Circuit Switched Data (HSCSD) and EDGE fulfill the requirements for packet data service and increased data rates in the existing GSM/TDMA networks. I'll talk about EDGE separately under the section "Migration To 3G". GPRS is actually an overlay over the existing GSM network, providing packet data sevices using the same air interface by the addition of two new network elements, the SGSN and GGSN, and a software upgrade. Although GPRS was basically designed for GSM networks, the IS-136 Time Division Multiple Access (TDMA) standard, popular in North and South America, will also support GPRS. This follows an agreement to follow the same evolution path towards third generation mobile phone networks concluded in early 1999 by the industry associations that support these two network types. The General Packet Radio Service (GPRS) The General Packet Radio Service (GPRS) is a wireless service that is designed to provide a foundation for a number of data services based on packet transmission. Customers will only be charged for the communication resources they use. The operator's most valuable resource, the radio spectrum, can be leveraged over multiple users simultaneously because it can support many more data users. Additionally more than one time slots can be used by a user to get higher data rates.
375
Second Generation (2G) wireless cellular mobile services was a step ahead of First Generation( 1G) services by providing the facility of short message service(SMS) unlike 1G that had its prime focus on verbal communication. A typical 2G G.S.M network service ranges from 800/900MHz or 1800/1900 spectrum. The bandwidth of 2G is 30-200 KHz.
2.5 Generation
In between 2G and 3G there is another generation called 2.5G. Firstly, this mid generation was introduced mainly for involving latest bandwidth technology with addition to the existing 2G generation. To be frank but this had not brought out any new evolution and so had not clicked to as much to that extend.
What is 3G Generation
But to overcome the limitations of 2G and 2.5G the 3G had been introduced. In this 3G Wide Brand Wireless Network is used with which the clarity increases and gives the perfection as like that of a real conversation. The data are sent through the technology called Packet Switching .Voice calls are interpreted through Circuit Switching. It is a highly sophisticated form of communication that has come up in the last decade. In addition to verbal communication it includes data services, access to television/video, categorizing it into triple play service. 3G operates at a range of 2100MHz and has a bandwidth of 15-20MHz. High speed internet service, video chatting are the assets of 3G.
In comparison to 2G customers will have to pay a relatively high license fee for 3G. The network construction and maintenance for 3G is much expensive than 2G. From the point of view of customers, expenditure will be excessively high if they make access to various facets of 3G.
Main 4G Feature
When It is still to estimate as to how many number of people have moved on from 2G to 3G , technology has come up with the latest of its type namely 4G.A successor of 2G and 3G, 4G promises a downloading speed of 100Mbps and is yet to shower its wonders on. then with the case of Fourth Generation that is 4G in addition to that of the services of 3G some additional features such as Multi-Media Newspapers, also to watch T.V programs with the clarity as to that of an ordinary T.V. In addition, we can send Data much faster that that of the previous generations.
California, United States that designs and sells consumer electronics, networking, voice, and communications technology and services.