Professional Documents
Culture Documents
00GS MW F8 50GS B W F6 BM
L IA EC P
(Twin)
BMW F800/650GS
281
TS R PA L
282
Windscreen BMW F800GS/F650GS (Twin)
Lots of riders of the F800/F650GS (Twin) would like a better wind protection, because the original windscreen is extremely sporty in design. We provide it with the high screen! The Touratech windscreen is much bigger, and has a different aerodynamic shape. The resulting improved wind protection reduces the (wind) pressure on the rider, which results in much more relaxed riding. Turbulence around the helmet is minimised and protection against the weather improved. The windscreen is simply fitted in place of the regular one. It is attached at the same points. Height: 350 mm, width: 310/360 mm.
040-0648
Cockpit Shield BMW F800GS/F650GS (Twin) The cockpit shield enhances the appearance of the front section of the F800GS/F650GS. It creates a visual link between the tachometer and the headlight, and conceals connections and cables. The black plastic shield is easy to fit behind the windscreen. - Can be used with the instrument cover 048-0430 048-0445
Fairing, Windscreen
BMW F800/650GS
283
048-1002
284
Instrument Cover BMW F800GS/F650GS (Twin)
The instrument cover gives the cockpit a much clearer appearance. It is easy to attach directly behind the windscreen. The integrated on-board socket with fuse makes it easy to connect a GPS device or mobile phone. Made of black powder-coated aluminium. - Can be used with the cockpit shield 048-0445
048-0430 048-0431 with two sockets Crossbar For some time now, many enduro bikes have not been equipped with a crossbar. Many streetfighters with high handlebars dont have one, although it is ideal for mounting some interesting accessories: - Roadbook holders - GPS receivers - Motorcycle computers - Map holders - and many more To fit all these accessories you will need to mount our crossbar. The original handlebars are retained. The handlebar middle strut is made of high quality, specially adapted aluminium parts, and is simply screwed on later. 040-0603 Kaoko Cruise Control mechanical cruise control BMW F800GS/F650GS (Twin) The original by the South African inventor! The Kaoko Cruise Control replaces the original handlebar end weights. The anti-slip knurled screw secures the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle. Despite that, the motorbike decelerates in a gentle and controlled way. 048-0600 (with OEM handguards) 048-0601 (without OEM handguards)
Christoph Isenberg / Africa
BMW F800/650GS
285
048-0414 048-0419
048-0415 048-0420
286
Folding Mirror, Length Adjustable Universal folding mirror, length and angle continuously adjustable, to suit most motorbikes. - Suitable for use on left or right - Including the appropriate mounting adapter, e.g. BMW G450X, F650 (single cylinder) Yamaha XT 660, Suzuki V-Strom, Triumph Tiger, Honda Transalp, Varadero, Africa Twin, KTM 640/690 Adv, KTM LC8 950/990/SE - carries the E test mark. 040-0760 Mounting Adapter (1 unit) - Required for the BMW F800/650 GS (T win), HP2 and R1200GS/Adv. 040-0761
BMW GS Trophy 2010 / South Africa
610-0400 612-0340
BMW F800/650GS
Handlebar Height Increase 20 mm BMW F800GS/F650GS (Twin) Those who like to go off-road and do so frequently, will find the 20 mm handlebar height increase indispensable. It makes it much easier to ride while standing. It also facilitates a pleasanter, more relaxed position while sitting. Significantly increases touring comfort. It takes just moments to fit the handlebar height increase. Delivery includes screws and TV certificate. 048-0150 Handlebar Protector Rubber BMW F800GS/F650GS (Twin) The handlebar clamp is an often ignored potential source of danger in off-road use. However, so that nothing unpleasant happens in the event of a fall, we have developed a handlebar protector that will benefit your health by absorbing the impact of your helmet. A little thing that could make a big difference! 048-0410 GPS Handlebar Bracket Adapter BMW F800GS/F650GS (Twin)
The bracket adapter is simply fitted to the handlebar mounting clamps on your BMW. Our GPS brackets all fit perfectly on its 12-mm brace. For easy, safe attachment of your GPS. With virtually no impairment of the view of the instruments.
287
048-0210 Horn Button Protection for BMW F800GS/F650GS (Twin) You know the problem: with a fully packed tank bag and the handlebar turned nearly all the way, the horn button is pressed accidentally. With our 1.5 mm thick, powder-coated stainless steel horn protection, the problem is gone for good. The horn protection is easily fitted with the existing instrument screw and is hardly noticeable. The functionality of the horn is not impaired in any way. 044-3034 Guard for Brake Fluid Container Handlebars BMW F800GS/F650GS (Twin) Passers-by simply love playing with the cap on the brake fluid container. Over time, this will impair the action of the cap safety mechanism. The guard will prevent this, and protect the whole container. Easily and quickly fitted. 048-0408 plastic guard 048-0240 aluminium guard
288
BMW F800GS 048-0440 black 048-0446 dark magnesium metallic matt 048-0454 sunset yellow
BMW F800/650GS
289
When ordering, please substitute the X on the end of the order number for the number in brackets.
Hand protectors GS F800/650 GS (Twin):
F650GS (Twin) - Handprotectors GD for steel handlebars 040-708X F800GS - Handprotectors GD for aluminium handlebars 040-668X Spoiler for Touratech Hand Protectors GD 040-730X
290
Xenon Headlights We turn night into day! Xenon headlights have a much high output than conventional halogen headlights, although they require only a small amount of power (3200 as opposed to 1500 lumen). This, and the fact that the colour of the light is very similar to daylight, makes it much easier to see at night. Which in turn leads to a significant increase in driving safety and comfort. Try them once, and you wont want to go back. TV-certified and with special brackets, all attachment materials and detailed instructions. Left side only. All Xenon control units by Touratech are protected against strong vibrations.
F800GS F650GS (Twin)
Fog Lights Visually similar to Xenon headlights, the fog lights offer a distinct safety advantage in rain, fog and snow. They can also be mounted together with our Xenon headlights. TV-certified and with special brackets, all attachment materials and detailed instructions. 048-0260 048-0262 048-0264 048-0266 048-0270 048-0273 048-0276 048-0280 Fog lights left Fog lights left Fog lights right Fog lights right Xenon headlights left Xenon headlights left Fog/Fog lights Xenon/Fog lights BMW BMW BMW BMW BMW BMW BMW BMW F650GS (Twin) F800GS F650GS (Twin) F800GS F650GS (Twin) F800GS F800GS/F650GS (Twin) F800GS/F650GS (Twin)
Xenon
Halogen
Lighting, Indicators
BMW F800/650GS
Daytime Running Lights for BMW F800GS Unmissable powerful dominant LEDayFlex! The LEDayFlex daytime running lights system that we use is accommodated in a specially developed body for optimum mounting on the BMW. We have combined advanced design and innovative lighting technology into a perfect unit. - 30x longer lasting than an H7 bulb - A row of brilliant white lights - 5 lamps in one unit - Each lamp has 5 diodes and one high-power LED - Lentil-shaped, computer-designed lens - Metal housing protects lamp and gives best heat dissipation - Low power consumption at just 8 watts (approx.) - Delivery without German TV Type Approval. 048-0286
291
Even the biggest rocks wont damage your headlight with our steel headlight protector. It consists of a strong corrugated grid that is welded directly to the frame, and is completely powder-coated. Assembly is as straightforward as you would think, and it is attached directly to the headlight bracket of your BMW. No need for drilling or major conversions! This headlight protector has been developed for off-road use. 048-0255
048-5095
048-5095 Stainless steel headlight protector, black, with quick release fastener
048-0425
048-0255
292
Seat Touring This seat significantly increases seating comfort, especially on long stretches. The reason: the ultra-elastic yet strong outer material, which makes the padding even more efficient. The integrated recess relieves the pressure on the coccyx and distributes the drivers weight over the whole seat. Thanks to the offset seams on the side and slim shape of the seat, there is no pressure against the thighs. All in all, a wonderful and comfortable seat for your BMW! 055-2234 (low) Height 50 cm 055-2230 (standard) Height 52 cm 055-2232 (high) Height 54 cm
Seat *Breathable* The breathable seat offers tremendous advantages over the standard one, especially at high temperatures. It enables the air to circulate inside the seat, which efficiently eliminates perspiration in the seat area. This in turn helps to prevent the underclothing from sticking and wrinkling. The innovative padding has a special recess which significantly increases the seating comfort, and the hard-wearing outer material in GoreTex copes easily with even the toughest conditions. 055-2240 055-2242 (standard) (high) Height 52 cm Height 54 cm
The information on seat heights always relates to our definition on page 1216.
048-0295
BMW F800/650GS
Tank Conversion Kit BMW F800GS/F650GS (Twin) Unfortunately, it is not quite easy to increase the BMW F800GS/F650GS tank volume and reach. Therefore we have decided to increase the total volume to 36 litres (including the standard tank). This conversion kits turns the BMW F800GS/F650GS into a true long-distance motorbike. All the necessary fitting materials are included. F800GS, unpainted 048-0380 F800GS, dark magnesium 048-0382 F800GS, black/yellow 048-0384 F800GS, white 048-0386 F800GS, black/lava orange 048-0388 F650GS(Twin), unpainted 048-0390
293
600-0043
Progressive Replaceable Fork Springs for BMW F800GS with Large Tank
Strongly recommended for use with our BMW F800GS tank conversion. The progressive springs are perfectly matched to the F800GS with our large tank and offer a significantly improved response and greater safety in extreme situations, even with the higher weight on the front wheel. Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes.
040-7408
294
Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes.
040-7402 Hyperpro Progressive Replacement Springs, without Lowering, BMW F800GS The set includes replacement fork springs and a replacement spring for the shock absorber. Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes. 040-7401 040-7400 040-7407
(for fork and shock absorber) (only fork spring F800GS) (only fork spring F650GS-twin)
BMW F800/650GS
295
Touratech Suspension has been designed by Tractive Suspension. Tractive has specific, profound exper-tise of the Touratech type of motorbike models. As an example, the people at Tractive designed most of the shocks used by BMW Motorrad since the last 10 years. They therefore understand the specific user and reliability requirements as no one else does. The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Last but not least every shock design has been tested by theTouratech experts in Enduro use during the 2011 season.
Detailed information on Touratech suspension and available variants can be found starting on page 1221 !
HighEnd 048-5865
Extreme 048-5870
296
BMW F800/650GS
Multitool Front Fork Adjustment BMW F800GS/F650GS
Like to have the right tools with you at all times? Not a problem with the Touratech Multitool! Not only can you adjust the front fork at any time using the Multitool, but in an emergency it will also loosen and tighten practically every screw connection, including the mirror, on the F800GS/F650GS (Twin). The secret: it disappears inside the bracket of the original fork key!
297
048-0221
048-0132
044-2100
298
Shield Rear Silencer BMW F800GS/F650GS (Twin)
As yet, the BMW F650GS (Twin) and F800GS have no factory-fitted protection for the rear silencer. We have therefore developed shields for the rear silencers on both versions. The shields make the large rear silencer generally more appealing. They also efficiently protect the most conspicuous part of the exhaust system against the scratches and dents that can be caused by stones or falls. The shield rear silencer is made of laser-cut anodised aluminium, which means it is both light and hardwearing. It is very easy to fit, and can in fact even be attached by a layperson. .
Rear silencer
BMW F800/650GS
299
AC Schnitzer Stealth Rear Silencer Carbon, Street Legal, for BMW F800GS The latest development by AC Schnitzer. A visual highlight for the F800GS the carbon inlet and outlet covers create a sporty look; the new hexagonal design allows for greater ground clearance and more extreme lean angles, and the sporty sound ensures the appropriate appearance. Street legal, of course. Including connecting pipe! Weight: approx. 3,1 kg 048-0950 Remus Revolution for the F800GS/F650GS (Twin) Lighter and narrower alternative to the original exhaust. Excellent sound for those who appreciate the powerful sound. Manufactured to the same standard of quality you have come to expect from Remus. With permit (EC-ABE). REMUS Revolution Rear Silencer, Aluminium, with ABE Beautifully shaped aluminium rear silencer. It is relatively light and constructed with workmanship of quality similar to that of its brother. From a technical standpoint, the exhaust is similar to the titanium version. Weight: approx. 3,6 kg 048-0954 REMUS Revolution Rear Silencer Titanium, with ABE Elegant rear silencer in titanium. The workmanship of the entire exhaust is of very high quality. The titanium exterior makes for an exhaust which is very light, robust and not sensitive to surface soiling. Weight: approx. 3,2 kg 048-0955
Aluminium
300
048-0340 048-0338
Frame Guard BMW F800GS/F650GS (Twin) A very good-looking and extremely practical guard for the frame of your BMW. Everyone knows the problem: your boots scrape against the frame, and gradually damage the surface. Mud and sand can also scratch the frame tubes. Our well-fitting frame guard in tough plastic is the perfect solution to this problem. Couldnt be easier to fit - and it blends well with the vehicles overall appearance. 048-0344 for the left side 048-0346 for the right side Frame Guard Alu, Right BMW F800GS/F650GS (Twin)
Protects the frame and brake cylinders against damage, prevents your off-road boots from getting stuck - and is a treat for the eye! The strong, lasercut aluminium guard takes just moments to fit.
048-0155
Locking Oil Filler Cap for BMW F 800/650 GS (Twin) *With Dip Stick* Stolen oil filler caps are a thing of the past. No special tool required: easy to operate using a small unobtrusive key. - High-quality workmanship - High-quality brand lock - Can be keyed to match our integral pannier locks 048-0244
Frame Protection
BMW F800/650GS
Frame Guard Alu, Left BMW F800GS/F650GS (Twin)
Protects the frame and brake line clamp against damage, prevents your off-road boots from getting stuck - and is a treat for the eye! The strong, lasercut aluminium guard takes just moments to fit.
301
048-0412
Heel Protector Extension, Left BMW F800/650GS (Twin) In heavy use the plastic on the original part can harden and break. The Touratech heel protector extension is - totally heat-resistant - extremely strong - made from 4 mm anodised laser-cut aluminium. 048-5026 Rubber Pad for the Frame Guard
For all those who not only want the ideal functionality, but also have high standards when it comes to appearances! The rubber pad for the frame guard will also protect your boots - and it simply looks good! Easy to attach by means of the clip mechanism.
048-0366
048-0190
048-0140
302
048-0405 048-0406
048-0165
BMW F800/650GS
Oil Filter Guard BMW F800GS/F650GS (Twin) Situated just behind the front wheel, the oil filter on the F800GS/F650GS (Twin) is almost completely unprotected. The multi-part oil filter guard protects it and the oil cooler against stones and coarse dirt. With no impairment of the function of the oil cooler whatsoever. Made out of anodised aluminium and stainless steel components and fitted to existing attachment points, it is the perfect complement to the long-distance appeal of the F800GS/F650GS (Twin). 048-0126
303
Crash Bar BMW F800GS/F650GS We have also developed an extremely strong crash bar for the BMWs. The plastic-coated steel tube is integrated perfectly in the design of the motorbike, and will cope even with the toughest conditions. An intended bending point will protect the frame and screw attachments against damage. The slender design also offers lots of advantages when riding off-road. The two-piece roll bar is easy to fit. All attachment materials included. 048-0300
Crash Bar Extension BMW F800GS/F650GS Two additional bars are easily and simply screwed to the roll bar for the engine (048-0300). This measure significantly extends its protective function. Now the fairing and radiator of the F800GS/F650GS (Twin) in particular are well protected. Putting an end to expensive repairs or even breakdowns caused by radiator problems. 048-0302
Engine Guard Extension The engine guard extension on the F800GS/ F650GS (Twin) also protects your machine against stones and coarse dirt. It closes the gap between the rear wheel and engine guard, and thus increases their efficiency considerably. We deliberately dispensed with recesses to prevent the risk of the motorbike becoming stuck on stones or branches. Fitting it to the main stand using three collars with rubber seals is extremely effective at preventing the guard from rattling. 048-0180 048-0182 F650GS (Twin) F800GS
304
Cover Brake Fluid Reservoir, Rear BMW F800GS/F650GS (Twin)
The brake fluid reservoir on the F800GS/ F650GS (Twin) is almost unprotected. Our lid offers protection against damage and prevents the loss of the lid. 048-0220
048-0160
048-0135
Engine/Radiator Guard
BMW F800/650GS
305
048-0465 048-0466
048-0460
306
030-0090 030-0095
Unifilter for BMW F800/650GS (Twin) High Performance for Clear Airways
We found the solution to all dust problems in Australia. Unifilter Australia gave us an air filter to test that fully met our expectations. The Touratech Research & Development team has used the Unifilter in all races since 2006 and since then has found no dust residue in the air filter box. Another advantage of the filter, made of high-tech foam, is the long service life. The filter is not thrown away when its dirty but rinsed out, lubricated again and used time and time again. Thus you dont just take care of your engine but also your wallet.
044-0870
BMW F800/650GS
Adjustable Gear Lever BMW F800/650GS (Twin)
Enables you to adapt the BMW perfectly to your requirements. Ideal when using adjustable footpegs or if the original lever simply doesnt fit. The gear lever adjusts from 12 cm to 18 cm in 10-mm stages. It also has a folding front part which limits the damage caused by falls and drops. And should the gear lever ever be bent, it is very easy to straighten it again.
307
048-0222
048-0120
048-0120 048-0233
048-0145
308
Chain Wheel for BMW F800GS/F650GS (Twin) Chain wheel made of steel
Years of construction 2008 and 2009: 048-0486 41 teeth 048-0487 42 teeth 048-0488 47 teeth
Starting from model 2010: 048-0489 41 teeth 048-0490 42 teeth 048-0491 47 teeth
Chain Pinion for BMW F800GS/F650GS (Twin) Chain pinion made of steel S - version sport, lighter through drillings 048-0480 048-0482 048-0484 15 teeth 16 teeth 17 teeth 048-0481 048-0483 048-0485 15 teeth S 16 teeth S 17 teeth S
Compared to the original 16 teeth front and 42 teeth rear (F650GS: 17/41), combined 15 teeth front plus 47 teeth rear results in approx. 10% reduction in speed and 10% increase in torque.
048-0110 *Works* long-distance foot pegs BMW R 800 GS 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots Perfect combination of grip and self-cleaning With a more slender design for better ground clearance Significantly less susceptible to impacts Strengthened mounting point With a blasted surface and laser inscription for a superior finish 048-5315 (F800/650GS)
BMW F800/650GS
Long-Distance Footpegs
Our long-distance footpegs are made of top quality stainless steel. Thanks to the large free areas, dirt simply falls through them, and the laser-cut edges provide maximum grip and support. The folddown function of the original pegs has been retained.
309
Long-Distance, Relocated Front Footpegs The footpegs are fitting further forward thus providing optimum distance between the touring boots and the brake lever or gear lever. 041-0625 Long-Distance, Relocated Rear Footpegs The long-distance footpegs are fitted further back thus providing optimum space for enduro boots. 041-0626 Carbon Shield Pillion Peg BMW F800GS/F650GS (Twin) Not everyone likes the simple steel bar on the back left footpeg. However, as it is extremely important as heel protection, we have developed a shield in high quality carbon. Not only does it look extremely elegant, but it also increases the protective aspect of the bar. To fit, the hard-wearing and very light shield is simply screwed directly to the heel protection. Elegant looks and maximum protection! 048-0360 Studded Pillion Passenger Footpegs For anyone who rides with a pillion passenger through difficult terrain. With the studded rear footpegs the pillion passenger has a firm grip, too, and does not risk falling off the bike when the going gets difficult. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. A special mechanism keeps them folded up when they are not required. Material: high-quality stainless steel. 048-0250
048-0142
310
Excel Rims with Set of Spokes BMW F800GS Over countless kilometres of testing and travelling, we have found that the weak point of many original wheels is the rims. With our rim sets, you can rectify this defect without having to buy a whole new wheel! Made to the highest specifications, Excel rims have been a guarantee of the ultimate in quality for many years. Numerous world championship titles in off-road sports have been won with Excel rims made by Haan Wheels. Apart from which, the black Made in Japan rims also look extremely good. In our opinion, they are the best looking wheels on the market by far! The Touratech Racing Team relys exclusively on Excels!
Scope of delivery: - Excel rim *black* - Stainless steel spokes (36 pieces) (Hub, rear sprocket and brake discs are not included in scope of delivery)
048-0500 048-0501
048-0438
Andreas Hlsmann / France
BMW F800/650GS
Mudguard Extension Front
The mudguard extension gives the F650GS (Twin) a new and most striking appearance. It adds a genuine long-distance flair. This easy to fit and extremely strong plastic item also offers added protection against dirt and splashes. Unmistakeably good-looking! The paintable mudguard extension is also easy to fit to the F800GS, and makes the beak look longer.
311
048-0342
Mudguard Height Increase with Steel Braided Brake Lines for BMW F800GS
In tough off-road riding, the gap between the front wheel and mudguard is often not enough for the tyre to clean itself. The result: the front wheel gets caked up, and in an extreme case may even block altogether. And the rider will fall. This height increase gives the tyre as much space as is technically possible - so theres room for the dirt on difficult terrain! The mudguard height increase also makes the whole bike much more functional and look more off-road appropriate. In addition to the height increase, delivery includes longer steel braided brake lines.
048-0200
Mudguard Sport Front BMW F650GS (Twin) Shorter and sportier than the original and yet with the best characteristics. The mudguard sport offers reliable protection against wet roads and dirt. Thanks to its special shape, it can handle even the muddiest stretches without the front wheel blocking. The sport mudguard also beautifully disguises the inelegant screw attachment points. Made of strong plastic. 048-0330
312
048-0101
BMW F800/650GS
313
Water protected
048-5804
314
Water protected
Tank Bag Black Edition BMW F800/650GS *waterproof* The Black Edition tank bag not only perfectly fits the shape of the tank on the 800 GS, it also matches the overall look of the Triple Black and packs an array of clever detail solutions: an aerodynamically optimised map pocket, document compartment with separate credit card pouch in the top cover, waterproof zips and two practical side pockets. Reflective panels lend the finishing touch to this black tank bag, which is made from completely waterproof PVC-coated polyester fabric.
Size: (l x w x h) approx. 35 x 26 x 18/25 cm; volume: approx. 16/22 litres. Colour: black - Suitable for all model years! Made in Germany by KAHEDO.
048-5803
Water protected
048-5805
Tank Bag
BMW F800/650GS
315
Water protected
Tank Bag High End BMW F800/650GS (Twin) The tank bag High End was developed especially for theF800/650GS (Twin). Its standard capacity of about 14 litres can be expanded to about 20 litres quickly and easily. An additional pocket at the back provides enough room for storing a purse or documents. There is a small pocket on the left for a multitool or similar items. The rubber strap on one side can be used to fix rain trousers or gloves.The map pocket is fixed to the top of the tank bag with Velcro. Fitting the tank bag is easy with the two buckles at the front and straps at the back. A strong carrying handle and two straps for converting the tank bag into a rucksack are also included. Made of Teflon-coated CORDURA, therefore water-repellent. Colours: black, grey with sewn in, reinforced reflective strips/cords. Dimensions: (l x w x h) 30 x 26 x 17/25 cm Capacity: approx. 14/20 litres 055-1164
055-1162
Water protected
316
Tank Bag Daytrip for BMW F800GS/F650GS (Twin) Planning a weekend trip and no idea where to put your water bottle or waterproofs? Our solution: Daytrip! This lovely, perfectly fitting tank bag has plenty of room for everything youll need on your trip. Strong and dimensionally stable, it will cope easily with even the toughest conditions. The Daytrips features include a side mesh for gloves or waterproofs, and the lid contains a document pocket withcredit card slots and the detachable map pocket. Includes straps so it can be used as a rucksack. Colour: black Dimensions: 30 x 26 x 14 cm Capacity: approx. 12 litres 055-1160
Water protected
055-1242
High End Tail Rack Bag for Pillion BMW F800GS/F650GS (Twin)
The High End tail rag bag has the same quality features as the standard rear bag for the BMW F800GS/F650GS (Twin) - 055-1242 - but is substantially more comfortable. Additional features: The capacity can be increased to 35 litres simply by unzipping a zip. There is an outer pocket on the top for small items, and a luggage net for easy storage of wet waterproofs. Colour: black / grey Dimensions: 37 x 35 x 14/26 cm Capacity: approx. 20/35 litres
055-1244
BMW F800/650GS
Universal Travel Bag for Pillion Seat
A unique solution for all luggage issues! Specially developed to suit almost any motorbike and designed for multi-purpose use. Because it is easy to attach and remove, our Universal Travel Bag is a flexible and ingenious alternative to fixed pannier systems, even for longer trips.
317
You will find more information on the Universal Travel Bag and the accessories on page 1152 ! 055-1461
055-1297
Tail Rack Bag HZ, BMW F800GS/F650GS (Twin) The practical tail rack bag is perfect for storing all kind of bits and pieces, such as tools, spare gloves etc. The bag simply fits over the tail unit and is secured by 2 straps. Only for use without luggage rack. Colour: black Dimensions: approx. 20 x 27 x 8 cm Capacity: approx. 4 litres 055-1236
318
052-2000 052-2001
052-2004
BMW F800/650GS
319
105,6 cm
320
Pannier Rack BMW F800GS/F650GS (Twin) Strong pannier rack, 18 mm tube diameter. Notable for the carrying handles. They provide support for the pillion passenger - and are useful if you ever have to pull the motorbike out of thevmud! Pannier rack easy to fit to existing attachment points with the special brackets. Ideal for the long-distance look of the F800GS and F650GS (Twin)! 051-2230 048-5555 black rack stainless steel
ZEGA Pro Topcase Rack F800/650GS (Twin) The Special Carrier for our ZEGA Pro Topcases.
Made entirely of stainless steel and specifically designed for the BMWs attachment points, the topcase rack is the perfect way to attach ZEGA Pro topcases to your bike. The topcase rack can be used on its own or in conjunction with our pannier system.
You will find the available topcases on page 1074 and the following. 048-0183