Professional Documents
Culture Documents
1)
Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units with heat recovery, air heating units, accessories.
Flexible ducts and fittings for ventilation, air conditioning and heating (Catalogue no. 14)
Flexible and semi-flexible air ducts made of polymeric materials, aluminium, galvanized or stainless steel, metal fittings for ventilation, air conditioning, heating, gas handling and abrasive particles aspiration.
Plastic grilles for ventilation and air conditioning (Catalogue no. 11)
PROFIPLAST extruded plastic grilles for ventilation and air conditioning.
Metal grilles for ventilation, air conditioning and heating (Catalogue no. 12)
Metal grilles made of extruded metal profile for ventilation and air conditioning.
Energy saving ventilation. Single room energy recovery ventilators. (Catalogue no.16)
Single room reverse ventilators with energy regeneration for efficient ventilation and lowest investments in ready-built and brand new premises.
CONTENT
About us
page
4
Advantages of Plastivent system
page
6
Application examples
page
10
Round air ductwork system
page
16
Flat air ductwork system
page
22
Metal workshop
Extrusion Workshop
VENTS is the only exporter of ventilation equipment in Ukraine. Our goods gained consumers acceptance in more than 80 countries of the world including the countries of Europe, America, Asia that confirms the company reliability and top quality of our products. Since 2008 VENTS is the only Ukrainian member of the USA Ventilation and Conditioning Association HARDI. Worldwide recognition witnessed that VENTS is the leader of the world ventilation market.
Get benefit from cooperation with VENTSTM and enjoy the maximum range of products of the top quality from one manufacturer.
"Plastivent" air ductwork system is the ideal solution for arrangement of ventilation systems in small and medium-sized residential, office and commercial premises as well for connection of cooker hoods, exhaust hoods, cowls and other exhaust equipment. It includes rectangular 55x110, 60x120, 60x204 mm air ducts, round 100, 125, 150, 200 mm air ducts and a great variety of fittings such as bends, reducers, connectors, etc.
Basic advantages of "Plastivent" system: A great variety of fittings designed for assembly of complex ductworks with any geometry based exclusively on "Plastivent" system components. Smooth inner duct surface provides low air resistance. Corrosion resistant properties ensure long service life. Low weight. Ventilation system based on "Plastivent" air ducts produces lower noise level as compared to other systems with corrugated or steel air ducts. Low thermal conductivity Environmentally friendly plastic used for manufacture of "Plastivent" system does not sustain combustion.
Extremely easy mounting due to no complicated assembly operations and special tools. Small overall dimensions of the rectangular components allow using the system in limited area above false ceilings. Aesthetic view makes the system suitable for mounting in ready-made premises.
Round duct
page
16
page
16
page
17
page
17
page
17
page
18
page
18
page
18
Connector with backdraft damper and wall plate for round ducts
page
19
page
19
Reducer
page
19
VENTS. Flat and round PVC ductworks | Catalog 15 | 11-2011
Reducer
page
20
page
20
page
20
page
21
page
21
Flat duct
page
22
page
22
page
22
page
23
page
23
page
23
page
24
page
24
page
24
page
25
page
25
page
25
page
26
End grille
page
26
page
26
page
27
page
27
page
28
VENTS. Flat and round PVC ductworks | Catalog 15 | 11-2011
APPLICATION EXAMPLES
Kitchen
10
APPLICATION EXAMPLES
Bathroom
Apartment
11
APPLICATION EXAMPLES
Cafe
MV 120 VJ
125
A 125 VRF
A 125 VRF
12
APPLICATION EXAMPLES
House
Aluvent 125
C 125
C 125
A 125 VR
A 125 VR
A 125 VR
A 125 VR
13
APPLICATION EXAMPLES
Office
Aluvent 125 Aluvent 125 C 125 A 125 VRF C 125 Aluvent 150
A 125 VRF
Vents VK 150
14
APPLICATION EXAMPLES
Vents 150 VK
Aluvent 125 C 125 A 125 VRF Aluvent 125 C 125 A 125 VRF Aluvent 125
C 125
C 125
A 125 VRF
A 125 VRF
15
Round duct
Application
Supply and exhaust ventilation of various premises. Formation of round air ductworks.
Design
Made of white PVC. Diameters: 100, 125, 150 and 200 mm. Duct length from 350 to 2500 mm. Connected with matching diameter connectors.
L
D1
Code 10035 20035 30035 40035 1005 2005 3005 4005 1010 2010 3010 4010 1015 2015 3015 4015 1020 2020
Dimensions [mm] D 100 125 150 200 100 125 150 200 100 125 150 200 100 125 150 200 100 125 D1 103 128 153 204 103 128 153 204 103 128 153 204 103 128 153 204 103 128 L 350 350 350 350 500 500 500 500 1000 1000 1000 1000 1500 1500 1500 1500 2000 2000
Code 3020 4020 1025 2025 3025 4025 10035/2 20035/2 1005/2 2005/2 1010/2 2010/2 1015/2 2015/2 1020/2 2020/2 1025/2 2025/2
Dimensions [mm] D 150 200 100 125 150 200 104 129 104 129 104 129 104 129 104 129 104 129 D1 153 204 103 128 153 204 107 132 107 132 107 132 107 132 107 132 107 132 L 2000 2000 2500 2500 2500 2500 350 350 500 500 1000 1000 1500 1500 2000 2000 2500 2500
Application
Supply and exhaust ventilation of various premises. Wall mounting.
Design
Made of white PVC. Telescopic design of two parts. Diameters: 100, 125, 150 mm. Air duct length is adjusted within 300 to 500 mm or 500 to 1000 mm.
Dimensions [mm] D 100 125 150 100 125 150 D1 103 128 153 103 128 153 D2 104 129 154 104 129 154 D3 107 132 157 107 132 157 L 300-500 300-500 300-500 500-1000 500-1000 500-1000
D1
D3
D2
inner duct
outer duct
16
Application
Supply and exhaust ventilation of various premises. Connection of flexible round ducts.
Design
Made of white PVC. Cover the connector with air duct and fix it with clamps. Connecting diameters: 100, 125, 150, 200 mm.
D1
Dimensions [mm] 60 60 60 60 D 100 125 150 200 D1 103 128 153 204
Application
Supply and exhaust ventilation of various premises. Connection of same diameter air ducts at 90.
Design
Made of white plastic. Connecting diameters: 100, 125, 150 mm.
Dimensions [mm] D 100 125 150 D1 97 122 147 137 164 189 b 30 30 30
a
D1 D b
Application
Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
Connection of same diameter round ducts and integration into complex ventilation systems.
Design
Made of white plastic. Connection of same diameter three round ducts at 90. Connecting diameters: 100, 125, 150 mm.
Dimensions [mm] D 100 125 150 D1 97 122 147 173 198 223 b 30 30 30 c 139 164 189
c
D D1
D1 D
17
Application
Supply and exhaust ventilation of various premises. Connection of air ducts to ventilation shafts. Decoration of mounting openings.
Design
Made of white plastic. Screw fixing to wall. Connecting diameters: 100, 125, 150, 200 mm. Code 15 25 35 45 Dimensions [mm] D 103 128 151 204 h 3 3 3 3 a 150 170 204 284 b
b
Application
Supply and exhaust ventilation of various premises. Connection of same diameter air ducts.
Design
Made of white plastic. Designed for direct installation into air duct and equipped with a lock ring. Connecting diameters: 100, 125, 150, 200 mm. Dimensions [mm] D 100 125 150 200 D1 96 123 148 197 62 62 62 62
D1
Application
Supply and exhaust ventilation of various premises. Connection of same diameter air ducts.
Design
Made of white plastic. Equipped with a backdraft damper for back flow prevention. Designed for direct installation into air duct and equipped with a lock ring. Connecting diameters: 100, 125, 150, 200 mm.
D1
18
D h
Connector with backdraft damper and wall plate for round ducts
Application
Supply and exhaust ventilation of various premises. Connection of same diameter air ducts. Decoration of mounting openings.
Design
Made of white plastic. Equipped with a wall plate for decoration of mounting openings. Equipped with a backdraft damper for back flow prevention. Screw fixing to wall. Connecting diameters: 100, 125, 150, 200 mm. Dimensions [mm] 150 170 204 284 b 134 154 188 268 c 62 62 62 62 D 100 125 150 200
b D
Application
Supply and exhaust ventilation of various premises. Connection of same diameter air ducts. Decoration of mounting openings.
Design
Made of white plastic. Equipped with a wall plate for decoration of mounting openings. Screw fixing to wall. Connecting diameters: 100, 125, 150, 200 mm.
D
Dimensions [mm] 150 170 204 284 b 134 154 188 268 c 62 62 62 62 D 100 125 150 200
b
Reducer
Application
Supply and exhaust ventilation of various premises. Connection of various diameter air ducts.
Design
Made of white plastic. Connecting diameters: 80-100, 100-125, 125-150, 150-200 mm.
Dimensions [mm] 60 60 60 71 D1 103 129 154 204 D2 100 125 150 200 D3 76 96 121 146 D4 80 100 125 150
D1 D3 a D2 D4
19
Reducer
Application
Supply and exhaust ventilation of various premises. Connection of 120 and 125 mm round air ducts.
Design
Made of white plastic. Connecting diameters: 125-129 mm.
D1
D2
D3 a
Code 216
Application
Supply and exhaust ventilation of various premises. Connection of various sized air duct.
Design
Made of white plastic. Connecting diameters: 80-100-120-125-150 mm. Cut out spare length piece to get the required size.
120
100
150
125
Code 310
Application
Supply and exhaust ventilation of various premises. Connection of round and flat ducts.
Design
Made of white plastic. Direct connection to round and flat ducts. Connecting ducts: 100-55x100, 100-60x122, 125-60x204 mm.
30
80
30 b1 b
L D1 D2
Dimensions [mm] a 113 124 208 a1 110 122 204 b 59 64 64 b1 55 60 60 D1 103 103 128 D2 100 100 125 L 137 137 140
a a1
20
D4
Application
Supply and exhaust ventilation of various premises. Connection of flexible ducts with plastic system components.
Design
Made of white plastic. Connection to flexible air ducts without clamps.
Flexible spiral seam duct is connected to one side and the other side is connected to 100 mm flange. Left or right (R) thread. Right thread connectors are used with Polyvents air ducts.
90 90
B 30 30
C 60 60
D 100 100
E 110 110
internal
Dimensions [mm]
D A E B C
B C
Application
Supply and exhaust ventilation of various premises. Connection of flexible ducts with plastic system components.
Design
Made of white plastic. Connection to flexible air ducts without clamps.
Flexible spiral seam duct is connected to one side and the other side is connected to 100 mm air duct. Left or right (R) thread. Right thread connectors are used with Polyvents air ducts.
1215 1215R
90 90
30 30
60 60
100 100
110 110
Application
Supply and exhaust ventilation of various premises. Mounting of round ducts to wall, ceiling or any other plane surface.
Design
Made of white plastic. Fixation to plane surface with screws. Special snaps provide reliable fixation of the duct with the holder. Connecting diameters: 100, 125, 150, 200 mm. Dimensions [mm] 113 138 163 213 b 20 20 20 20 D 103 128 153 203
a b
Code 16 26 36 46
external
Code
Dimensions [mm]
A E
21
Flat duct
Application
Supply and exhaust ventilation of various premises. Formation of flat air ductworks.
b b1 L a1 a
Design
Made of white PVC. Size: 55x110, 60x122, 60x204 mm. Duct length from 350 to 2500 mm. Connected with matching connectors. Code 50035 70035 80035 5005 7005 8005 5010 7010 8010 Dimensions [mm] a 55 60 60 55 60 60 55 60 60 b 110 122 204 110 122 204 110 122 204 a1 52 57 57 52 57 57 52 57 57 b1 107 119 200 107 119 200 107 119 200 L Code 5015 7015 8015 5020 7020 8020 5025 7025 8025
Dimensions [mm] a 55 60 60 55 60 60 55 60 60 b 110 122 204 110 122 204 110 122 204 a1 52 57 57 52 57 57 52 57 57 b1 107 119 200 107 119 200 107 119 200 L
Application
Supply and exhaust ventilation of various premises. Connection of same sized flat ducts.
Design
Made of white plastic. Designed for installation into air duct and equipped with a lock ring for easy jointing. Connecting sizes: 55x100, 60x122, 60x204 mm. Dimensions [mm] a 55 60 60 b 110 122 204 a1 59 63 64 b1 114 125 208 c 66 69 91
b1 b a1 a c
Application
Supply and exhaust ventilation of various premises. Connection of same sized flat ducts.
Design
Made of white plastic. Designed for installation into air duct and equipped with a lock ring for easy jointing. Equipped with a backdraft damper for back flow prevention. Connecting sizes: 55x100, 60x122, 60x204 mm.
b1
b a1 a
22
Application
Supply and exhaust ventilation of various premises. Connection of same sized flat flexible ducts.
Design
Made of white PVC. Cover the connector with air duct and fix it with clamps. Connecting sizes: 55x100, 60x122, 60x204 mm. Dimensions [mm] a 55 60 60 b 110 122 204 a1 52 57 57 b1 107 119 200 c 60 60 60
b b1 a1 a c
Application
Supply and exhaust ventilation of various premises. Connection of same sized flat ducts at 90 vertically.
Design
Made of white plastic. Connecting sizes: 55x100, 60x122, 60x204 mm. Dimensions [mm] 55x110 60x120 60x204 89 93 103 32 32 42
b b a c
a c
Application
Supply and exhaust ventilation of various premises. Connection of same sized flat ducts at 90 horizontally.
Design
Made of white plastic. Connecting sizes: 55x100, 60x122, 60x204 mm.
c
32 32 32
a b
Dimensions [mm]
23
Application
Supply and exhaust ventilation of various premises. Angular connection of flat ducts.
Design
Made of white plastic. Turning point angle from 3 to 48.
a 32
Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
Application
Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
Connection of same sized flat ducts and integration into complex ventilation systems.
Design
Made of white plastic. Connection of same sized three flat ducts at 90. Connecting sizes: 55x100, 60x122, 60x204 mm. Direct connection to matching sized ducts.
Dimensions [mm] 144 155 248 174 185 288 55110 60122 60204
c
Application
Supply and exhaust ventilation of various premises. Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
Made of white plastic. Fixation to plane surface with screws. Specially designed configuration provides reliable duct to holder fixation and quick dismantling. Connecting sizes: 55x100, 60x122, 60x204 mm.
Code 56 76 86
24
Application
Supply and exhaust ventilation of various premises. Connection of flat and round ducts at 90.
Design
Made of white plastic. Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
Flat ducts have direct connection and round ducts are connected through a matching connector.
Dimensions [mm] a 55110 60122 60204 60204 60204 D 100 100 97 122 147 D1 103 103 100 125 150 b 58113 63125 64208 64208 64208 h 87 87 92 92 92 L 138 140 140 164 188
D1 D
Application
Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
Connection of flat and round ducts.
D1 D
Design
Made of white plastic. Connecting dimensions: 55x110-100 mm. Direct connection to air duct.
L d b
Code 531
Dimensions [mm]
h
ab 55110
D 100
D1 103
c 58
d 113
h 87
L 172
a
b a
Application
Supply and exhaust ventilation of various premises. Connection of flat different sized ducts.
Design
Made of white plastic. Connecting dimensions: 55x110-60x204 mm.
Code 518
a b
25
Application
Supply and exhaust ventilation of various premises. Connection of air ducts to ventilation shafts. Decoration of mounting openings.
Design
Made of white plastic. Screw fixing to wall. Connecting sizes: 55x100, 60x122, 60x204 mm.
a
Code 55 75 85
b 56 61 61
c 2 2 3
d D
End grille
Application
Decoration of supply or exhaust vents of public, residential and industrial ventilation systems. Correct air flow distribution in premises. Wall or ceiling mounting.
Design
Made of white plastic. Detachable front part facilitates cleaning. Modification with an insect screen (s) is available. Connecting dimensions: 55x110 and 60x204 mm.
Dimensions [mm]
f d b c e
f a b c d e
Application
Decoration of supply or exhaust vents of public, residential and industrial ventilation systems. Correct air flow distribution in premises. Wall or ceiling mounting.
Design
Made of white plastic. Equipped with a movable flap for air capacity regulation. Air pass is regulated with a tilt wand. Detachable front part facilitates cleaning. Modification with an insect screen (s) is available. Matches with 55x110 and 60x204 mm air ducts.
26
Application
Supply and exhaust ventilation of various premises. Flat to round duct connection.
Design
Made of white plastic. Connecting dimensions: 55x110-100 mm. Direct connection of reducer to round and flat ducts.
b
Code 115
cb
Application
Supply and exhaust ventilation of various premises. Flat to round duct connection.
Design
Made of white plastic. Connecting dimensions: 55x110-100 mm.
Reducer has direct connection to flat air ducts and connection through connector to round ducts
c
Code 1156
Application
Supply and exhaust ventilation of various premises. Connection of air ducts to ventilation shafts. Decoration of mounting openings.
Design
Made of white plastic. Screw fixing to wall. Connecting sizes: 60x122 mm.
Code 750
27
Application
Supply and exhaust ventilation of various premises. Connection of round and flat ducts.
Design
Made of white plastic. Direct connection flat duct, connection to round duct with connector. Connecting ducts: 100-60x122 mm.
a b e h
D1 D
Code 7112
28