Professional Documents
Culture Documents
50047
SPECIFICATION
1/5
Valid on date of printing only. 50047-F5015-3.doc 12/14/2006
Gas Technologies Since 1965.
1 Name
50047
2 Application
This specification applies to the “50047” regulator.
3 Function
The “50047” regulator supplies gas by inserting the Leland gas cylinder in the inlet port.
The “50047” regulator supplies gas from 0 to 19 [psi] by adjusting the dial. (from 0 to 0.13 [MPa])
Secondary pressure is read from the built-in pressure gauge.
4 Technical data
2/5
Valid on date of printing only. 50047-F5015-3.doc 12/14/2006
Gas Technologies Since 1965.
Air, Carbon dioxide (CO2), Nitrogen (N2),
Gas
Helium (He)
Lubrication oil White Vaseline
Standard pressure
(Figure 1)
Characteristic
Standard flow
(Figure 2)
characteristic
6 Lot numbers
The lot number is the Die-Marking on the Body.
7 Packaging
As per our standard specification
8 Inspection items
- Pressure characteristics
- Flow characteristics
- Leakage at operating pressure.
- Safety device characteristics
- Strength
- Appearance, measurement
9 Notes
A Use a specified gas cartridge.
B Store the regulator and cylinder, between 32 and 104 degrees F. (0, 40 C)
C Do not remove the gas cylinder until the gas has been completely expelled.
D Gas cylinders get cold after use. Do not remove the gas cylinder with your bare hand. In
case of carbon dioxide, wrap cylinder with cloth, and remove it from regulator.
E Do not drop, and do not hit.
F Regulator is adjusted precisely. Do not do disassemble or alter regulator.
G The regulator is not waterproof. If it gets wet, dry completely and use as normal.
3/5
Valid on date of printing only. 50047-F5015-3.doc 12/14/2006
Gas Technologies Since 1965.
H Protect the outlet of the regulator with a check valve when
using a substance such as corrosive or adhesive fluid that
may adversely affect the regulator function.
I If using carbon dioxide, use the regulator in a range as
shown.
Liquid carbon dioxide entering the valve body may cause
inaccurate results or secondary safety device to release.
J To set the regulator pressure, make sure the gas is flowing.
(Setting the pressure without releasing gas will provide
inaccurate results.)
10 Warranty
A One year from date of delivery.
B Regulator used for purposes other than those described in this specification or altered in any
way is not covered by this warranty.
C Problems arising from using cylinders other than described in this specification are not
covered by this warranty.
4/5
Valid on date of printing only. 50047-F5015-3.doc 12/14/2006
Gas Technologies Since 1965.
Reference characteristic (N2)
Fig.1 Standard pressure characteristic
Conditions: Secondary pressure is 14.5 [psi] at no flow. (Primary pressure 1450 [psi])
30
Secondary pressure [psi]
20
10
0
3000 2000 1000 0
Primary pressure [psi]
30
Primary pressure 1450 [psi]
870 [psi]
290 [psi]
Secondary pressure [psi]
20
10
0
0 50 100
Primary pressure [psi]
5/5
Valid on date of printing only. 50047-F5015-3.doc 12/14/2006