Professional Documents
Culture Documents
to offer greater
, opportunities in the future.
R
VYLON
harmonizes with environment
,
C O N T E N T S
34
34
56
56
78
910
1112
13
14
Water-based co-polyester
Series
78
Polyester Urethane
910
13
Amorphous poly-lacticacid
14
Vylon
Vylonal
Vylomax andVyloecol are registered trademarks of TOYOBO in Japan.
Features
Amorphous
co-polyester
Applications
Paint
for coil coating (PCM), can coating, binder for magnetic paint, ink binder, adhesive for dry lamination, etc.
Agent for film surface treatment, coating agent for receptor of recording media,
adhesive for vibration damping steel, adhesive for printed circuit board, etc.
Coating agent
for word processor
ribbon
()
Mn
Grade
Form
Molecular
weight
Specific
gravity
103
(at30)
Tg
103
Pellet
200
Pellet
220
Flake
226
Pellet
1.26
65
237
Flake
15
1.27
240
Flake
15
245
Pellet
270
Hydroxyl group
value
Acid value
KOHmg/g
KOHmg/g
Mn
Grade
Form
Molecular
weight
Specific
gravity
103
(at30)
Hydroxyl group
value
Acid value
KOHmg/g
KOHmg/g
Tg
560
Sheet
19
1.24
600
Pellet
16
1.25
47
Tg
630
Sheet
23
1.20
637
Sheet
29
1.24
21
650
Sheet
23
1.21
10
660
Flake
1.26
55
14
670
Sheet
30
1.20
PET
Adhesion to PET, adhesion to metals
802
Flake
1.26
60
37
T g
High Tg, adhesion property
822
Flake
15
1.22
68
885
Pellet
1.28
79
16
GK130
Sheet
1.25
15
19
PCM
Branched type, coil coating
GK140
Sheet
13
1.25
20
10
GK130
Higher molecular weight type of GK130
GK150
Sheet
13
1.25
20
GK140
Acid added type of GK140
GK250
Flake
10
1.24
60
11
GK330
Sheet
17
1.21
16
GK360
Flake
16
1.24
56
PET
Adhesion to PET, weatherability
GK570
Sheet
19
1.20
Flexibility, paint
Branched type
Toughness, can coating
20
Tg
High Tg, Branched type
70
Tg
High Tg, flame resistance
GK590
Sheet
1.25
15
17
1.27
60
P E T
Good adhesion to PET
GK640
Pellet
18
1.28
79
19
1.36
60
Solvent resistance, film coating
GK680
Sheet
1.16
10
21
Pellet
23
1.26
67
GK780
Sheet
11
1.26
36
11
280
Pellet
18
1.27
68
GK810
Flake
1.17
46
19
290
Pellet
22
1.26
72
GK880
Pellet
18
1.28
84
T g
High Tg, paint
296
Flake
14
1.26
71
GK890
Sheet
11
1.16
17
13
300
Sheet
23
1.20
BX1001
Sheet
28
1.19
-18
T g
Low Tg, vibration damping property
500
Sheet
23
1.23
Adhesion property, transparency
550
Sheet
1.25
23
1.26
17
1.26
1.17
28
47
67
53
-15
5
6
50
()
Amorphous
co-polyester
(Solvent soluble type)
Solvent solubility
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable for your purpose,
application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
PCM
Coil coating (PCM)
Can coating
()
()
GA-1200 Pellet
Features
Form
Crystalline
co-polyester
Grade
GA-1300 Pellet
GA-1310 Pellet
GA-2310 Pellet
Applications
GA-3200 Pellet
for shoulder pad, adhesive and treating agent for textile and fiber, extrusion coating agent for
metal, coating for electric wire and sealant for paper box, etc.
Mn
Molecular Specific
weight
gravity
103 (at30)
Tg
Melting point
Melt viscosity
dPas/200
10
1.27
141
130
20
1.26
-6
167
510
Low viscosity,
air filter
Solvent resistance,
fuel filter
GA-5300 Pellet
Grade
Form
Mn
Molecular Specific
weight
gravity
103 (at30)
Tg
Melting point
Melt viscosity
dPas/200
Features and
applications
GA-5310 Pellet
GA-5410 Pellet
GM-400
Adhesive for
shoulder pad
GM-415
GM-443
GM-480
GM-900
Corrosion resistant
powder coating
Pellet
Pellet
Pellet
Pellet
Pellet
GM-913
GM-920
GM-925
GM-990
Pellet
Pellet
Pellet
Pellet
1.30
25
1.26
10
19
-8
143
113
4,600
150
GA-6300 Pellet
20
1.29
27
179
1,500
20
1.29
26
136
1,400
10
1.25
-3
123
140
25
1.25
122
1,600
25
1.25
-2
114
550
Adhesion property,
fabric application
25
1.28
26
110
1,600
30
1.25
-3
117
1,300
25
1.23
-14
100
430
1.28
18
1.24
25
1.26
25
14
-2
-15
138
163
112
1,500
230
1,500
35
1.15
-70
126
6,500
30
1.15
-60
107
1,000
25
1.28
15
166
4,000
30
1.27
111
8,000
GA-6400 Pellet
Solvent resistance,
adhesive for glass fiber
Texture,
fabric application
Adhesion property,
moisture resistance
SI-173
Pellet
RN-9300 Pellet
30P
Pellet
Adhesion property
Low viscosity,
air filter
Adhesion property
Low temperature
adhesion property
30
1.22
-20
96
25
1.28
78
185*
7,000**
25
1.34
73
198
3,800**
25
1.22
-28
125
2,000
Fabric application
Adhesion to metal
Solvent resistance,
fuel filter
Low viscosity
Crystalline
co-polyester
Adhesive
GA-3410 Pellet
()
Features and
applications
500
Low temperature
adhesion property
Extrusion performance,
toughness
Extrusion performance,
good flavor property
Adhesion property,
adhesion to metal
Adhesion property,
moisture resistance
Transparency,
fabric application
Hydrolysis resistance
dPas/250
()
()
Features
VYLONALR
Applications
(Water-based co-polyester)
(Water-based co-polyester)
Treating
agent for textile, film surface treating agent, steel plate treating agent and
coating agent for receptor of recording media, etc.
Grade
pH
Viscosity
Organic co-solvent
Flash point
wt%
dPas/25
(wt%)
30
27
46
n-BuCel (15)
70
34
2080
47
n-BuCel (11)
30
0.53
57
30
0.11.1
25
Mn
Grade
Molecular
weight
Tg
KOHmg/g KOHmg/g
MD-1100
20
40
70
MD-1200
15
67
t-BuCel (10)
70
MD-1245
20
46
i-PrOH (30)
23
MD-1335
1.0
47
None
30
0.11.0
57
n-BuCel (15)
31
1.0
47
27
0.11.3
40
103
Inkjet receptor
Breaking
elongation
Features and
applications
MPa
40
10
55
61
50
13
1200
MD-1480
15
20
800
70
MD-1500
77
14
50
t-BuCel (11)
70
MD-1930
20
-10
100
500
47
n-BuCel (9)
70
MD-1985
25
-20
90
800
47
None
MD-2000
18
67
Flexibility
Weatherability,
heat resistance
PET
Solvent resistance,
adhesion to PET
Low Tg
No co-solvent
Tg
High Tg
PET
Crystallinity,
adhesion to PET
PET
Crystallinity,
adhesion to PET
T g ,
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable for your purpose,
application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
UR
R
()
Features
VYLONR
UR
R
UR series is urethane modified co-polyester resin which is based upon the aromatic polymer
technology.
Excellent adhesion property to PET, PVC films or metals.
Excellent pigment (iron oxide, titanium dioxide, etc.) compatibility and dispersibility.
Excellent hydrolysis resistance and high modulus obtained by aromatic polymer chain technology.
()
Applications
Binders
for magnetic paint, film surface treating agent, coating for electric wire.
Series
(Polyester urethane)
Series
Binders for
magnetic tapes
Grade
Appearance
Solid content
Viscosity
wt%
dPas/25
Solvent composition
() (Weight ratio)
33
MEK/TOL=65/35
UR-1350
UR-1400
Mn
Molecular
weight
Tg
Hydroxyl group
value
Acid
value
Tensile
strength
Breaking
elongation
Features and
applications
MPa
103
UR-1350
30
46
34
60
KOHmg/g KOHmg/g
35
120
TOL/CHX/SOL150/IPH=20/20/30/30
UR-1370
30
46
34
60
30
40
MEK/TOL=50/50
UR-1400
40
83
23
80
1Remark1) 2Remark2)
UR-1410
UR-1700
UR-2300
UR-3200
30
210
TOL/CHX/SOL100=20/50/30
UR-1410
40
83
23
80
30
1.5
MEK=100
UR-1700
16
92
19
26
30
10
MEK/TOL=50/50
UR-2300
32
18
24
50
600
30
50
MEK/TOL=50/50
UR-3200
40
-3
23
65
700
30
35
MEK=100
UR-3210
40
-3
23
65
700
40
12
MEK/TOL=82/18
UR-3500
40
10
10
35
50
500
23
16
MEK/TOL=50/50
UR-4125
20
68
68
60
40
0.6
MEK=100
UR-4410
10
56
11
32
40
MEK/TOL=50/50
UR-4800
25
106
46
80
30
30
MEK/TOL=50/50
UR-5537
20
34
1618
27
200
UR-4410
UR-4800
UR-5537
UR-6100
UR-8200
UR-8300
UR-8700
Grade
UR-1370
UR-3210
(Polyester urethane)
45
100
CHX/SOL150/IPH=40/40/20
UR-6100
25
-30
46
10
1000
30
20
MEK/TOL=50/50
UR-8200
25
73
46
60
30
15
MEK/TOL=50/50
UR-8300
30
23
34
40
500
UR-8700
32
-22
24
10
1000
1Remark1)
1
Remark1)Cyclohexanone
30
30
MEK/TOL/CHX=33/33/34
PET
Adhesion to PET,
no yellowing grade
UR-1350
T g
Hardness, high Tg
UR-1400
Tg
Flexibility
Adhesion property,
toughness
UR-3200
Tg
Pigment dispersability,
high Tg
Heat resistance,
Toluen-free
Tg
Pigment dispersability,
high Tg
Pigment dispersability,
reactivity to crosslinking agent
no yellowing grade
Tg
Pigment dispersability,
high Tg
Tg
Pigment dispersability,
intermediate Tg
Tg
Pigment dispersability,
low Tg
2
Remark2)Solvesso
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable for your purpose,
application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
Remark3)Isophorone
10
Features
pastes for electronic applications are developed based on the highly polymerized
co-polyester resin technology (VYLONR) accumulated for many years.
Grade
Color
tone
FC-230G-23
Green
FC-230G-46
Green
FC-580G
Green
350
110
FC-100G
Green
150
710
Milky white
(Green)
500
HB
FR-200C-5
Clear
100
CR-103C
Clear
550
Toyobo's
FR-200C(G)
Applications
Various
()
Viscosity
Pencil Electric insulation
hardness
resistance
dPas/25
45
210
F
F
12
510
12
510
Curing
conditions
Features and
applications
UV500mJ/cm 15015
min.
UV500mJ/cm 15015
min.
13
UV600mJ/cm
12
UV500mJ/cm
110
14
UV500mJ/cm
2B
UV1000mJ/cm
3B
UV1000mJ/cm
Bending performance.
moisture resistance
Bending performance.
thick film printing
For tacky spacers
Bending performance.
moisture resistance
ITO
For touch panels,
for ITO
ITO
For touch panels,
for ITO
ITO
For dot spacers,
for ITO
Conductive paste
Grade
Type
Filler
Viscosity
Pencil
hardnes
dPas/25
Keyboards
Volume
resistivity
cm
Curing
conditions
min.
270
2H
3.510 13030
170
2H
5.010 15030
-5
DW-250H-5
Thermosetting
DW-250H-23
Thermosetting
DW-260H-1
Thermosetting
DW-351H-30
Thermosetting
Silver
280
2H
3.010 15030
270
HB
1.010 15030
580
2H
2.010 13030
290
2H
4.510 13020
180
2H
5.010 12030
DW-117H-41
Thermosetting
DW-104H-3
Thermosetting
DW-545
Thermosetting
Silver
Silver
Silver
Silver
Silver
Silver
DW-114L-1
DW-420L-2
Lacquer
Silver
DWP-025
Lacquer
Silver
DX-153H-87
DX-152H-75
DX-116L-1
Lacquer
Silver
Thermosetting Silver/carbon
700
200
400
300
-5
-5
4H
2H
-5
1.810 13030
-5
-4
-4
-5
-5
-5
5.010 20030
-5
4.010 15030
250
2H
4.510 13030
280
2H
6.010 13020
Thermosetting Silver/carbon
Lacquer
Silver/carbon
-5
-5
350
2H
8.010 13030
Carbon
DY-200L-2
370
2H
1.010 13020
DYP-020
250
3H
2.010 15030
Lacquer
Lacquer
Carbon
Carbon
11
For circuits,
low resistance
For circuits,
bending performance
-1
Thermosetting
2.010 13030
DY-280H-3
For silver spot
conductive bonding
Adhesives for
surface mounting
ITO
Adhesion to ITO,
low temperature drying
ITO
For ITO, adhesion property,
low temperature drying
Bending performance
2H
-1
Etching-resist
Grade
Solvent resistance,
for electrode
Color
tone
ER-112N
Blue
ER-225N
Blue
ER-245N
ITO
For ITO, low resistance
-2
100
Carbon
For low resistance circuits
-1
Thermosetting
Low resistance,
bending performance
Halogen free,
bending performance
General grade
DY-150H-30
Features and
applications
Blue
Viscosity Pencil
Alkaline
hardness removability
dPas/25
(3%NaOHaq,40)
Curing
condition
Features and
applications
270
2H
Swelling type
UV500mJ/cm
300
3H
UV500mJ/cm
200
2H
UV500mJ/cm
ITO
Good etchant resistance.
for ITO
ITO
For fine pattern printing,
for ITO
ITO
For fine pattern printing,
for ITO
Grade
Color
tone
Viscosity Hardness
dPas/25
KS-420C
KA-215
BC-061C
UF-1430
Light
yellow
Volume
resistivity
(Shore D)
cm
75
10
1800
75
10
Light
yellow
150
10
100
10
Milky
white
Clear
Features and
applications
15
40
Curing
condition
min.
15
min.
14
15
min.
P C T
For sealing,
PCT resistance
For surface mounting
of electronic parts
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable for your purpose,
application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
12
()
BPS
()
(Polyamideimide)
Features
Features
VYLOMAXR
VYLOECOLR
(Amorphous poly-lacticacid)
Applications
Applications
Chemical
Printing
resistance paint, heat resistance paint, lubrication paint, heat resistance film,
insulation coating agent with heat resistance and back coating agent for thermal transfer ribbon.
Grade
HR-11NN
HR-12N2
HR-13NX
HR-14ET
Yellowish
brown
Yellowish
brown
Yellowish
brown
15
30
30
25
Light
yellow
HR-15ET
Light
yellow
HR-16NN
Yellowish
brown
dPas/25
20
5
85
7
NMP=100
Toughness
Remark)
NMP/XYL/MEK=50/35/15
Friction/wear resistance
EtOH/TOL=50/50
14
500
NMP=100
Pellet
BE-600
Sheet
BE-910
Sheet
Specific
gravity
Tg
Hydroxyl group
value
103
(at30)
KOHmg/g
43
1.26
50
25
1.24
30
11
25
1.18
-10
11
Features and
applications
Adhesive for
dry lamination
Colorless, transparency
High modulus,
low thermal expansion
Coefficient of
thermal expansion
Light transmission
factor
10
MPa
10-5/
%(500nm)
HR-11NN
15
300
150
80
4.2
72
HR-12N2
11
255
85
10
5.0
73
HR-13NX
10
280
105
20
4.2
72
HR-14ET
10
250
95
10
5.9
88
HR-15ET
260
100
10
5.7
88
HR-16NN
30
320
420
60
2.3
64
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable
for your purpose, application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
13
Mn
Molecular
weight
NMP/XYL=67/33
25
BE-400
Flexibility
Remark)Xylene
Form
()(Weight ratio)
Mn
Tg
Molecular
Tensile
Breaking
Grade
weight
strength
elongation
3
Grade
Features
Please pay attention to check or study carefully before using the grades listed here if these grades are suitable
for your purpose,application and process condition, etc.
All the data showed in this list is only for your reference, not guaranteed values.
Please refer to material safety data sheet (MSDS) or delivery specification before using the grades listed here.
14
AMORPHOUS COPOLYESTER
CRYSTALLINE COPOLYESTER
WATER-BASED CO-POLYESTER
POLYESTER URETHANE
Vylon Department
FORMULATED PRODUCTS
URL http://www.toyobo.co.jp/vylon
URL http://www.toyobo.co.jp/vylon/e
2
102()141-8633
TEL. (03) 6422-4883()
FAX. (03) 6422-4887
E-mail:Tokyo_Vylon@toyobo.jp
28()
530-8230
TEL. (06) 6348-3773()
FAX. (06) 6348-3752
E-mail:Osaka_Vylon@toyobo.jp
TEL:+81-3-6422-4883dial-in
FAX:+81-3-6422-4887
E-mail:Tokyo_Vylon@toyobo.jp
POLYAMIDEIMIDE
AMORPHOUS POLY-LACTICACID
TEL:+81-6-6348-3773dial-in
FAX:+81-6-6348-3752
E-mail:Osaka_Vylon@toyobo.jp
PRINTED WITH
SOY INK
TM
F0717K2010.02/2000