You are on page 1of 12

MAKING MAGNET

APPARATUS

PROCEDURE

TASK & REPORT

Bahasa
Version
APPARATUS
• MAGNET ( BAR OR U SHAPED)
• A CIRCLE SHAPED STEROFORM WITH DIAMETER OF 1,5 – 2 CM
• NEEDLE
• BIG NAIL
• 5 SMALL NAILS OR PAPER CLIPS
• BATTERY
• COOPER WIRE 30 CM – 50 CM OF LENGTH
• COMPASS
PROCEDURE
• Make a simple compass by using
Styrofoam and needle thus put in on the
water, turn the needle in to a bar
magnet with stroking (for plus mark) or
use compass as magnetic field detector
(for normal mark)
• Make magnet by following ways:
STROKING
Test your magnet!
INDUCING
This is the easiest ways!

3.Stick big nail and magnet together


4.Use the big nail to attract small nails
5.Leave it that way for a while
6.Test your new magnet
USING DIRECT CURRENT
2.Twist wire on big nail orderly
3.Connect the edges of the wire to the
battery anode and cathode
4.Test your new magnet
5.Write a report of this activity on a paper

You might also like