Professional Documents
Culture Documents
This document details the steps to be followed to copy and paste requirements from one Caliber Project
to other Caliber Project.
Launch CaliberRM 2006: Start ->All Programs -> Borland CaliberRM -> CaliberRM:
1. Enter required login data on the Login Windows screen with the following information
Server: TTCCALIB01
User: Your Lan ID
Password: Your Caliber password (case sensitive)
Press Logon
2. The Open Project Window will appear. From the drop down Select the project that you want to paste
the data to (You must have update access for this project) and Press OK
3. The tool should open and the selected project should be visible in the Project window.
1st
Instance
Launch 2nd instance of CaliberRM 2006: Start ->All Programs -> Borland CaliberRM -> CaliberRM:
4. Enter required login data on the Login Windows screen with the following information
Server: TTCCALIB01
User: guest (case sensitive)
Password: <blank>
Press Logon
5. The Open Project Window will appear. From the drop down Select the project that you want to copy
data from and Press OK
6. The tool should open and the selected project should be visible in the Project window.
2nd
Instance
7. Expand the Requirement Type from which you want to copy the requirements from the 2nd instance
9. Switch to the 1st instance, Click on the Requirement Type and select the requirement in where you
want to paste data
(Note: You will notice only Paste option when you Highlight the Requirement Type)
11. To paste a requirement as a child, Right Click on the selected requirement, Highlight on Paste and
Press Paste as Child
(Note: If you want the requirement to be at the high level, instead of Paste as Child, select the option
Paste Above or Paste Below)
(Note: This window will be displayed only if the copied requirements have child requirements underneath)
13. Select the option Paste the copied requirement and all child requirements and Press OK
(Note: If you want to paste only selected requirement, not the child requirements, select the option Paste
only the copied requirement and Press OK)