Professional Documents
Culture Documents
2 / 82
3BK 17417 3046 RJZZA Ed.08 Z2EV000030015 Ed.08
Contents
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.1 Rack Presentation and Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1.2 Weights and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Prerequisite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Initial State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Final State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 Tasks Sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Time Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 Required Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preliminary Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Before Going on Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Before You Start (At arrival on Site) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1 Rack Unpacking and Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Top Roof Removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Racks Dismantling (if Necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.1 Inter-Rack Cables Disconnecting (if Necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.2 Cabinet Mechanical Disassembling (if Necessary) . . . . . . . . . . . . . . . . . . . . . . . . . 3.3.3 Batteries Dismantling (if Necessary) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4 Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 Cabinet Assembling (if Dismantled on Site) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.1 Case of Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5.2 Case of Space Constraint at Right Side of Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . Rack Positioning and Fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Case of Steel Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2 Case of Concrete Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 Installation of Battery (if not Installed from Factory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.1 Battery Breaker Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.2 Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.3 Battery Assembling (if Dismantled on Site) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3.4 Connect the Temperature Sensor Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Earth and Power Supply Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 Installation of Cables in Site Cable Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 Protective Earth Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 Mains Power Supply Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.1 AC 230 V Power Supply Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4.2 DC 48 V Power Supply Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 Mains Power Supply Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.1 AC Mains Power Supply Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5.2 DC Mains Power Supply Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PCM Cables Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.1 Cable Installation in the Cable Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 Cable Passing at Rack Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 Case of 120Ohm Cable Connection (L907/8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.4 Case of 75-Ohm Coaxial Cables Connection (FLEX 3/8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 Other Connection Possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5.1 Connection of Other Type of 120-Ohm Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 8 8 11 11 11 11 11 12 13 14 15 16 16 17 18 19 20 20 22 23 26 27 27 27 29 31 32 33 34 35 37 37 39 40 41 42 43 43 45 46 46 47 49 51 52 53 55 57 57
3 / 82
Contents
6.5.2 Connection of Other Types of 75-Ohm Coaxial Cables . . . . . . . . . . . . . . . . . . . . . Antenna Jumpers Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1 Jumpers Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 Connection to the Head of Feeders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.3 Connection to the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.1 Alarm Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2 Synchronization Cables Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.1 UMTS Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.2 GSM Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.2.3 Synchronization Cabling Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.3 Output 48 V DC Power Cables Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.1 Removing the Transportation Eye Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 Top Roof Closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 Finishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendix A : Kits / Supplies / Documents / Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
58 59 60 62 63 65 66 69 70 71 72 73 75 76 76 77 79
4 / 82
Preface
Preface
Purpose
This document describes how to install an Evolium A9100 MBS Outdoor (Multistandard Base Station). In this document, to facilitate understanding, the MBS cabinet can also be named: MBO1/MBO1DC for single cabinet MBO2/MBO2DC for twin cabinets.
Note:
MBO2/MBO2DC = MBO1/MBO1DC + MBOE/MBOEDC (MBOE/MBOEDC = Extension Cabinet on the right of equipment) The cabinet can be equipped either with: UMTS modules only or GSM modules only or UMTS and GSM modules (MBO2/MBO2DC only).
Audience
This scenario is intended for: Installers Field service technicians Site administrators Supervisors Project managers Occasional users.
Assumed Knowledge
The reader must have a general knowledge of: Basic knowledge of Evolium equipments Experience of electrical mounting cabling.
5 / 82
Preface
6 / 82
1 Overview
1 Overview
This chapter provides general information about the principle of the operation and requirements for the procedure.
7 / 82
1 Overview
Figure 1: Evolium A9100 MBS Outdoor MBO2 cabinet, Top Cable Entry
Figure 2: Evolium A9100 MBS Outdoor MBO2 cabinet, Bottom Cable Entry
8 / 82
1 Overview
AC Switch Unit
ADAM 4
AC connection
radio subrack
SR 7
radio subrack
Options
SR 3
radio subrack
SR 2
Battery
radio subrack
SR 1
OUTC
DC Switch Unit
GND connection
radio subrack
Options
SR 3
radio subrack
SR 2
OUTC
radio subrack
SR 1
9 / 82
1 Overview
AC Switch Unit
ADAM 4
AC connection
radio subrack
SR 7
options
radio subrack
radio subrack
SR 6
Options
SR 3
radio subrack
SR 2
Battery
radio subrack
SR 5
radio subrack
SR 1
radio subrack
SR 4
OUTC
options
OUTC
10 / 82
1 Overview
1.2 Restrictions
None.
1.3 Prerequisite
Before to begin installation check that: The site is conform to safety rules of General wiring Handbook The site is ready to receive the rack, according to the SPP (refer to Kits / Supplies / Documents / Tools (Appendix A)) The equipment is delivered on site with associated installation kits (refer to Kits / Supplies / Documents / Tools (Appendix A)).
Note:
The site feeders are not mandatory installed before starting of operation.
11 / 82
1 Overview
Yes
Assemble the racks Interconnect the racks Fit the batteries (if dismantled)
Run the GND ground cable from the sites GND plate to the rack Connect the ground cable to the site plate Connect the ground cable to the rack
Run the AC or DC power cable from the sites power box to the rack Connect the cables to the site power box Connect the cables to the rack
Run the PCM cables from the DDF to the rack Connect the PCM cables
OPTION : Run the alarm cables from the site DDF to the rack Connect Alarm cables to the rack
OPTION : Run the synchronization cables from the MBS to other MBS Connect synchronization cables to the rack
Put the labels, panels, doors, roof, ... Finish the installation
12 / 82
1 Overview
Task
Preliminary tasks on site Delivery (with disassembling) Rack positioning and fixing Earth and power supply installation PCM cable installation Antenna jumper installation Finishing installation Total without option
Option Tasks
Rack transportation on final location Rack disassembling / assembling if necessary on site Battery removal / installation if necessary on site Installation of alarm cable (option) Installation of synchronization cables (option)
30
30
15 -
30
(1) = Transportation time to final location depending of the site. Mandatory 4 people for manual transport of disassembled equipment.
13 / 82
1 Overview
14 / 82
2 Preliminary Checks
2 Preliminary Checks
This chapter describes the preparation of the operation in two steps: At base At arrival on site.
15 / 82
2 Preliminary Checks
Refer to tools kit list in Kits / Supplies / Documents / Tools (Appendix A) and refer to the Tools Catalogue .
Check that Safety Instructions are Applied Fulfill Premises Inspection Form and Completion Check List
Refer to General Wiring Handbook for checking that the safety precautions have been taken for installation.
16 / 82
3 Delivery
3 Delivery
This chapter describes how to: Unpack the rack Dismantle the rack (if necessary for transportation on site) Transport the rack.
For personal safety, it is important that: During equipment transportation, do not handle the rack by the top roof If weather is very windy, be careful when roof opening During battery connection, protection and insulating tools must be used.
17 / 82
3 Delivery
2 - Check the delivery and report any damage to the carrier delivery note
Az 320 Baie N3 AR
G2 _O_120 _SBTS L P
1,200,60 1,20 L P H
AV
430
18 / 82
3 Delivery
H13
19 / 82
3 Delivery
SR 6
SR 5
SR 4
Flat cable
Heater Door alarm
BUSBAR
20 / 82
3 Delivery
4 - Disconnect SR0, SR6, SR5, SR4 subrack power cables from the BUSBAR
BUSBAR
13
14
DOOR SWITCH
14
13
MBO 1
MBO E
7 - Label , note and disconnect all cables which are crossing the two cabinets (example with UMTS modules)
21 / 82
3 Delivery
Torx head
22 / 82
3 Delivery
H13
H13
H13
H13
H13
1 - Switch off the battery breaker
H13
23 / 82
3 Delivery
3 - Remove gas-hose from batteries (be careful, Batteries and T-connecors are fragile. Use hot air blower to soften gas-hoses)
5 - On (+) terminal at the right lower battery, remove the nut/screw, disconnect the cable that goes to the circut breaker and the temperature sensor cable
24 / 82
3 Delivery
25 / 82
3 Delivery
3.4 Transportation
1234567890234567 1
Example of manual transportation using four peoples (single cabinet) Example of craning using rod bar tool (for MBO2)
10
1x45
1740 1720
4.5
10
1x45
20
335
1070
335
26 / 82
3 Delivery
Note:
This tool 3BK 08898 AA can be left in the cabinet. Thats why it must be ordered as other installation kits (see list of kits in appendix).
1234567890123456 1234567890123456 1234567890123456 1234567890123456 1234567890123456 123 1234567890 1234567890123456 123 1234567890 1234567890123456 123 1 1234567890 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 1 12 1 1234567890123456 123 1 12 1234567890 1234567890123456 123 1234567890 1234567890123456 123 1234567890 1234567890123456 1234567890123456 1234567890123456
Clearance constraint
100 mm
Rack
Wall
Guide
27 / 82
3 Delivery
28 / 82
Be careful : During equipment transportation, do not handle the rack by the top roof ! (it is not designed for handling) If weather is very windy, be careful when roof opening or removing.
29 / 82
Materials
Description Bolt M12 x 80 Washer 12.4 x 24 x 1.6 Washer 13 x 24x 1.2 waved Nut M12 Levelling shims Expanding wall-plug Reference 1AD 00050 0123 1AD 00236 0006 1AD 00034 0017 1AD 00197 0008 3BK 26159 AAAA 1AD 01187 0003 Kit Basic Kit Basic Kit Basic Kit Basic Kit Basic Kit Basic Kit
Torx head
30 / 82
leveling foot
Shims
Steel construction
12
Waved Washer
31 / 82
500 mm +/ 1mm
MBO1(RS)
22 mm
839 +/ 1mm
500 mm +/ 1mm
MBO2(RS)
85 mm
1460,5 +/ 1mm
12345678901234567 12345678901234567
3 - Prepare wall plug: Insert wall-plug with screws into the holes Tighten a little and remove the screw from the wall-plug 4 - Position the rack
Leveling foot
123456123456 123456123456
5 - Using spanner of 19, level the rack
leveling foot
Shims
Soket rail
6 - Fix the rack: Position the shims under the rack Tighten the floor fixing screws
32 / 82
Breakers
0V
48 V ADAM 4 module
Stud 8 to 6 mm bridge 48 V
33 / 82
Breakers
OFF
34 / 82
Spacer
BLUE RED
Spacer
Sp ace r
Spa cer
M6 Terminal Stud
35 / 82
Spacer
Spacer
For Hawker Battery stud adapter must be screwed in (+) and () poles of battery pack
36 / 82
Depending on battery type, add or remove foam, to fix battery closing plate
Kit CMO11
To connect the temperature sensor plug: 1. Identify the X200 connector on OUTC board 2. Connect the SENSP plug to the X200 connector.
37 / 82
38 / 82
Before making any electrical connection to the rack, ensure that the safety instructions are applied. It is essential that: The electrical power supply is disconnected. Ensure all switches or fuses devoted to the rack into the site connection box are powered off Due to high leakage current, the protective EARTH must be connected to the equipment before AC/DC power cable connection.
39 / 82
Kit Basic kit Kit list Kit list Kit list Kit list Kit list Basic kit Basic kit Basic kit Basic kit Basic kit
DC -48V power cable 1x25 mm blue DC 0V power cable 1x25 mm2 black Lug ring crimp 8mm/50 mm
2
1AB 05067 0013 1AB 03205 0063 1AB 05067 0004 1AB 05067 0006
Lug, hole 6mm for power cable 25 mm2 Wire terminal for 6 mm cable Wire terminal for 2.5 mm cable
2 2
AC 230 V cable
GND cable
General view of rack fully cabled (antenna jumpers, PCM cables, power cables, . . . )
40 / 82
GND
Power cables
1m
41 / 82
2 - Connect GND cable to the site Earth plate and put a label: [Node B (x) ]
GND
12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345 12345
3 - Connect Earth cable to the GND 8mm stud of rack and attach it to the rack
42 / 82
Bridge
N L3 L2 L1 PE
GND
In 1phase installation cut it a little the bridge and fit it to the connector. In 3phase installation, do not fit (or remove) the bridge from the connector
Wire Earth Neutral (N) Phase 1 (L1) Phase 2 (L2) Phase 3 (L3)
43 / 82
6 - Connect and label the AC mains cable to the site power supply box (label [Node B (x) ]
44 / 82
16mm
4 - Run the DC -48V blue cable through the rubber cap and connect it to the DC In filter
6 - Connect and label the DC mains cable to the primary DC power supply (label [Node B (x) ]
NodeB(x)
45 / 82
AC 230V
N
1 - At side power cabinet, check if fuse breakers are switched off
2 - At rack side, using an ohm-meter, check if there is no short-circuit between each phase and neutral
P
4 - At side power cabinet, switch on the fuse breakers
3 - At rack side, do the same test between protective Earth and each 230 V phase
5 - At rack side, verify if the voltage between phases and neutral is about 230 Volts
6 - At rack side, using phase tester, verify that the phase wires are connected to the well connection points
46 / 82
8 - At rack side, using phase tester, verify if the phases are switched off
DC 48V
0V 48V
1 - At side power cabinet, check if fuse breakers are switched off 2 - At rack side, using an ohm-meter, check if there is no short-circuit between -48V filter and 0V stud
0V 48V
3 - At side power cabinet, switch on the fuse breakers 4 - At rack side, verify if the voltage between -48V filter and 0V stud is about -48 Volts DC nominal. Check carefully the polarity.
47 / 82
6 - At rack side, using a multimeter, verify if the -48V is switched off.Fit the rubber cap to the -48V terminal.
48 / 82
Help: Note:
To install and connect PCM cables at site side, refer to the document: Installation Method of DDF for BSS Equipment document. In case of multistandard installation, the ports 1 and 2 are dedicated to the GSM part (Abis 1 and 2) and ports 3 and 4 are dedicated to the UMTS part (E1-1 and E1-2).
49 / 82
Materials
Description Tie-wrap Label kit 120ohm PCM cable L907/8 75ohm PCM cable FLEX3/8 SP2M adapter ST75 Heat shrink sleeve Reference 1AD 00414 0006 3BK 08062 ACAA 3BK 08965 xx 3BK 25241 xx 3BK 08949 AA 1AC 00330 0002 Kit Basic kit Basic kit -
50 / 82
1m
E1
3 - Using a marker, mark the end of cable 4 - Label the cable with supplied labels: in UMTS fit [E1] label only in GSM fit [ABIS 1] + [ABIS 2] labels in GSM + UMTS fit both labels
51 / 82
40 mm
cover
Tie wrap
123 1 123 1 1
4 - Pass the cable toward the OUTC board
3 - Pass the cable in the cable gland and attach it to the rack
KRONE connector
52 / 82
purple/white
grey/yellow
Quad 4
grey/green
Quad 2
purple/brown
purple/red
grey/black
Quad 3
View of L 907/8 cable KRONE Pposition 8 Color of Wires Quad Signal
White Grey
Yellow Grey
Blue Purple
Brown Purple
Black Grey
Green Grey
Red Purple
White Purple
53 / 82
150 mm
1 - Remove the PCM lightening protection from KRONE connector of OUTC board
Sleeve
Example of KRONE finished cabling (cable braid must be squeezed in metallic clamp)
54 / 82
50 mm
1234 1234 12 12 12
1 - Remove the PCM lightening protection from KRONE connector of OUTC board 2 - Using Hot Air Blower, fit the Heat Shrink Sleeve 1AC 00330 0002 on each coaxial. Fit a rubber sleeve on head of cable
10 mm
55 / 82
4 - Fit 2x SP2M 75ohm adapter at PCM sub-D port ABIS1 and ABIS2 on OUTC board On OUTC screwblock terminal mount: wire bridge from pin 1 to pin 2
ABIS4
RX
wire bridge from pin 4 to pin 5 wire bridge from pin 6 to pin 7
TX
ABIS3
RX
5 - Connect wire bridge for use of port 3 and 4 (UMTS E1-3/E1-4, Multistandard E1-1/E1-2) on OUTC ABIS3 and ABIS4
8 coaxial cable
TX
TX coax.
TX RX
RX TX RX TX RX TX RX TX
1 2 3 4 5 6 7 8
TX
core
56 / 82
ABIS1 1
TX RX
ABIS2 8 1
TX RX
ABIS3 8 1
TX RX
ABIS4 8 1
TX RX
Example of OUTC screwing terminals If cables are not supplied by Evolium, then the wires must have right specifications for inserting in the KRONE connector. If not, the wires have to be connected to the green screwing connectors of OUTC board. The 3 jumpers must be removed from the connectors (they are used only for 75-Ohm connection).
1 2 3 4 5 6 7 8
GND braid earthing clamp TX TX GND drain wires RX RX R200 (not used) GND braid earthing clamp BTS input signal coming from BSC Output signal going toward BSC
57 / 82
1
123 123 123 123
10 mm
50 mm
1231234 123 123 1234 1234567 1212345 1123456 112 12 123 123456 2 1 123 1231 123 12341234 12342345 12345678 11234567 11234567 123 2345678 123456 12 1
3 4 5 6
Procedure
1. Prepare the cable head. 2. Connect the wires to the terminals and mount the earthing clamp.
Coaxial 1
Remarks For each connector: wire bridge from pin 1 to pin 2 wire bridge from pin 4 to pin 5 wire bridge from pin 6 to pin 7
ABIS 1 (RX)
ABIS 2 (TX)
ABIS 2 (RX)
ABIS 3(TX)
ABIS 3(RX)
ABIS 4(TX)
ABIS 4(RX)
58 / 82
59 / 82
60 / 82
N Sector or AZIMUT
N Sector or AZIMUT
N Sector or AZIMUT
Antenna feeders
N ANT A UMTS
N ANT B
P ANT A
P ANT B
Q ANT A
Q ANT B
UMTS
UMTS
Labels
Jumpers
N ANT A N ANT B P ANT A P ANT B Q ANT A Q ANT B
N ANT A
N ANT B
P ANT A
P ANT B
Q ANT A
Q ANT B
Rack
Principle of antenna jumpers cabling at top of rack (example 3 sectors)
UMTS
N Ant A
UMT S
UMTS case: Label the jumper with supplied labels (do not forget UMTS labels)
GSM case: Label the jumper with supplied labels (do not forget frequency labels)
61 / 82
Materials
Description Vinyl electrical tape Tie wrap Linerless Rubber Splicing Tape Reference 1AC 01556 0001 1AD 00414 0006 1AC 01595 0001 Kit Basic kit Basic kit Basic kit
1 - Screw connector male with connector female (tighten the screw manually then shake cables a little)
2 - Using specific tightening tool 3BK 25050 AA, tighten with firmness (refer to Tools catalogue)
Feeder
Jumper
32
2
27
1
Feeder
Jumper
12345111123 1 123 12123 12122 1 12 1234 12345 2311234 12312 1112123 123 1212345 12312122 12 12123 12 12311 123 123 12345 1234 123 23
3 - Fit the Linerless Rubber Splicing Tape 3M 130C (1 in figure) 4 - Fit the Vinyl Electrical Tape (2 of figure) over the Linerless Rubber Splicing Tape (1 in figure)
62 / 82
UMTS or GSM
UMTS only
R ant A S ant A
T ant A
GSM only
P ant B P ant A
S ant B
UMTS part
R ant A R ant B
T ant B
63 / 82
For the 1AB 18821 000xjumpers, use the bending tool and follow instructions from IO 95 (3DF 00300 0095 UAZZA).
Procedure
1. Ensure that the radius of each cable is at least 3 cm 2. Refer to required information of section 1.8 for cable connections 3. Connect the cables at top of rack 4. Tighten the screw manually then shake a little the cables 5. Using tightening tool 3BK 25050 AA, tighten with firmness When using torque wrenches to tighten the RF cables use the torque values given in the following table: Connector Type N Bridge on ANC 7/16 LPQMR CS25 Torque [Nm] 0.7-1.1 0.8-1.0 25 35 25
64 / 82
8 Options
8 Options
This chapter describes how to: Install and connect the external alarm cables Install and connect synchronization cables with other MBS or BTS of the site Install and connect 48 Volts Output.
Note:
To install and connect External Alarm cables at site side, refer to the document: Installation Method of DDF for BSS Equipment.
65 / 82
8 Options
1m
40 mm
66 / 82
8 Options
Tie wrap
70 mm
5 - Pass the cable in the cable gland and attach it to the rack
67 / 82
8 Options
Alarm
8 7 6 5 4 2 1
Connector position 1 2 3 4 5 6 7 8
Color of wires None White Grey Blue Purple Yellow Grey None
Quad number None 1 1 1 1 2 2 None Braid Earthing clamp GND of first Alarm (customer alarm number 10) Active pin of first Alarm (customer alarm number 10) GND of second Alarm (customer alarm number 13) Active pin of second Alarm (customer alarm number 13) GND of third Alarm (number 14) Active pin of third Alarm (customer alarm number 14) GND Braid earthing clamp
68 / 82
8 Options
XCLK
69 / 82
8 Options
MBS Slave
10 m max
XCLK 1 in
MBS Master
XCLK 2 in /out
10 m max
XCLK 1 out
70 / 82
8 Options
Case of synchronization between G3 and G4 BTS (1 connector must be disassembled and assembled on site to pass cable gland)
71 / 82
8 Options
1m
40 mm
Tie wrap
4 - Pass the cable in the cable gland and attach it to the rack
72 / 82
8 Options
The cabinet can supply 2 branches providing -48V. The maximum power for each branch is 500W. If an External Battery cabinet is attached, only one branch with -48V can be installed.
73 / 82
8 Options
8. Tighten the 0 V lugs (6, 7, 8) to the 0 V stud 9. Plug the wire connector into BOMU busbar in the Side Compartment, connector PDU1 / PDU2.
DCOUT to external cabinet equipment
Roof area
4 3
6, 7, 8
care of 2 Take location right
PG 16 glands position
48V DC OUT
BTS area
0V DC EXT BATT
0V DC OUT
Capacitors on top of MBO (equipped with 1 branch DC output and External Battery)
74 / 82
9 Finishing
9 Finishing
This chapter describes: Removing the transportation eye bolts Top roof closing Labelling of the rack Cleaning up the site Closing the rack.
75 / 82
9 Finishing
3 - Holding the top cover under an angle of about 20 , pull it to front to engage the hinges at the end of there cut-out
76 / 82
9 Finishing
H13
9.3 Finishing
Torx head
STATION
STATION
77 / 82
9 Finishing
3 - Clean the site (do not put packages into the customer bin)
5 - Close the doors and give the key to the site responsible
6 - Phone to the OMC responsible to ensure that no site alarms are activated
78 / 82
Mnemo BKG3O BLF4 CA120S8 CACOAX8 PC50YG1D PC03G25 PC05B5 PC25BL1D PC25B1D OCC33 OCC23 CA120S8 MP24 LAB JS10 FKW CA120S CACOAX1 DISMP None
Reference 3BK 08107 xx 3BK 05360 EAAA 3BK 08965 xx 3BK 25241 xx 3BK 08961 xx 3BK 25561 xx 3BK 08944 xx 3BK 25995 xx 3BK 08963 xx 3BK 08304 AA 3BK 08303 AA 3BK 08965 xx 1AD 02843 0001 1AD 02853 0001 1AD 06634 0011 1AD 02844 0001 3BK 08941 xx 3BK 08939 xx 3BK 08898 AA 3BK 26159 AA
Qty 1 2/s reel reel reel reel reel reel reel 1 2 reel 1 1 4 1 4m 4m 1 x
AC 230 volts power cable 3 x 2.5 mm AC 230 Volts power cable 5 x 6 mm2 DC -48V power cable 1x25 mm2 blue DC 0V power cable 1x25 mm blue Clock Synchronization cable (10 m) Clock Synchronization cable (10 m) Alarm cable 8 pairs (L907/8)
2
Mechanical part for 24 terminal blocks Labels for 24 terminal blocks CAD Terminal block DDF wall fixing kit 120ohm jumper for DDF (1 pair L904/1) 75ohm jumper for DDF (1 coax FLEX3) Clearance tool part 1 (long extension + socket) Shims for levelling (1 Set for 5 racks)
79 / 82
Consumable Supplies
Installer or subcontractor must supply: a set of sleeves to fit at each end of cables (PCM, Alarm, Power, ...) a set of screws, nuts and washers to connect power cables to Site Power Box and to Earth Plate a set of terminal lugs for power cables.
List of Documents
Applicable Notification List (3DF 00462 0004 AAAGA) Applicable Operation Instructions for GSM (3DF 00300 0004 UAZZA) Applicable Catalog of Instruction Operation for UMTS (3DF 00305 0000 AAAGA) General Wiring Handbook for UMTS (3BK 17424 8099 RJZZA) Tools Catalogue for field activity (3BK 17424 0007 RJZZA) Site Premise Inspection Form (8BL 00704 0015 DRBRA) Completion Check List for UMTS (3BK 17424 0006 QZZZA) Completion Check List for GSM (3BK 17200 0002 QZZZA) SPP 50 Specification for Site Preparation (8BL 00704 0067 DRZZA) A9100 MBS Hardware Description (3BK 20737 AAAA TQZZA) Part 17 Volume 17 CCD (3DF 00424 0021 ADBRQ) Installation Method of DDF for RNS Equipment (3DF 00435 0033 RJZZA). Bending Tool User Guide IO95 (3DF 00300 0095 UAZZA).
Installation Tools
The following table is used to check, at base, the availability of the required tools. refer to Tools Catalogue for content checking.
Name Basic set of tools Tightening tool for antenna jumpers 3BK 25050 AA
Calibration No No
80 / 82
Name Node B Outdoor specific tools: Craning bar 3BK 08804 AA Long tool key 3BK 08897 AA Short part key 3BK 08899 AA Tent 3BK 08899 AA. Specific bending tool for 1AB 18821 000x antenna jumper
Calibration No
no
no
81 / 82
82 / 82