Professional Documents
Culture Documents
PIC PROG
2. Features
Support major Philips devices Lock of programs in chip supported to prevent program copying ZIF socket on-board Compatible 40 pin Microcontrollers Auto Erase before writing and Auto Verify after writing Informative status bar and access to latest programmed file Simple and Easy to use
If you want use this kit to connect in USB port Use our USB to UART Converter
3. Specifications
Dimensions: 180mm x 100mm Power Supply: AC or DC Adapter 12V Interface: RS-232, 9-pin D connector Data Speed: 9600 bps, 8 bits, no parity, 1 stop, no flow control File format: Intel 8-bit HEX Program Sockets: 40 pin DIP - 0.6 Software: Works on Windows 95, 98, Me, 2000, NT, XP
Copyright
2007,All
Right
Reserved
NSK
PIC PROG CD CONTAINS 1. Flash Magic SOFTWARE 2. DATASHEETS 3. Keil IDE WITH SIMULATION
6. Software
Computer side software called Flash Magic is executed that accepts the Intel HEX format file generated from compiler Keil to be sent to target microcontroller. It detects the hardware connected to the serial port.
7.Software settings
1. Install the Software Flash Magic 2. Select Serial Port - As per your Computer 3. Select the Chip ( 89V51RD2)(1) 4. Open the Hex file from Browse (3) 5. To program click Start (5) , Then Message will apper press the reset Switch as Shown 6. Press the Reset Switch
Copyright
2007,All
Right
Reserved
NSK
PIC PROG
Programming status as Shown After the Programming is finished Press the Reset Switch To run the Program
Copyright
2007,All
Right
Reserved
NSK
PIC PROG
Contact information
For additional information, please visit http://www.nskelectronics.com For sales office addresses, send e-mail to: info@nskelectronics.com For Service Support send e-mail to : support@nskelectronics.com
NSK Electronics
No 66/3 , Sabari Complex S.P. Road , Bangalore - 560 002 Karnataka , India PH NO : 91- 080 - 41575115 , 22892194 Mobile : 09945263589,09448937489
Copyright
2007,All
Right
Reserved