Professional Documents
Culture Documents
S.DHARANIPATHY (11MR61)
April 2012 DEPARTRMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING PSG COLLEGE OF TECHNOLOGY (Autonomous Institution) COIMBATORE-641004
SPEED CONTROL OF 3 PHASE INDUCTION MOTOR USING PLC S7200-EM235 & DRIVE (MM)
Bonafide record of work done by
S.DHARANIPATHY (11MR61)
DISSERTATION SUBMITTED IN PARTIAL FULFILLMENT OF THE MINI PROJECT
April 2012
..
Dr. P.Navaneethan
Head of the Department
Certified that the candidate was examined in the viva-voce examination held on .
. (Internal Examiner)
. (External Examiner)
CONTENTS
CHAPTER Page No.
Acknowledgement.. (i)
1. INTRODUCTION.1
1.1 1.2 2.1. 2.2 3.1 3.2 3.3 3.4 3.5 3.6
3.7
Need and significance of the project Objective of the project Block Diagram Description Power supply Connecting the S7-200 CPU Connecting the RS-232/PPI Multi-Master Cable Starting STEP 7--Micro/WIN Verifying the Communications Parameters for Micro/WIN Establishing Communications with the S7-200 Creating a Sample Program Saving the Sample Project Downloading the Sample Program Placing the S7-200 in RUN Mode Input Block Diagram for EM 235 OutPut Block Diagram for EM 235 Output data word Format For EM 235 MM Vector Drive
2. SYSTEM IMPLEMENTATION.3
4. S7-200 EM-235..........................................................................18
5.2
Block diagram
ACKNOWLEDGEMENT
Dedicating this project to the Almighty whose abundant grace and mercies enabled its successful completion, we would like to express our profound gratitude to all the people who had inspired and motivated us to make this project a great success. We would like to sincere thanks to Dr.R . Rudramoorthy, principal, PSG College of Technology for providing us with the facilities necessary to pursue our project inside the college. We express our deep sense of gratitude to Dr. P.Navaneethan, Professor and Head, Department of electrical and Electronics Engineering, PSG college of Technology, for his kind cooperation and guidance throughout the project. Our Sincere thanks to Dr. L.Ashok kumar, Assistant Professors and Mr.M.Anand, Assistant Professors, Department of Electrical and Electronics Engineering, project guide whose valuable guidance and continuous encouragement throughout the course made it possible to complete the project work. We also thank all the faculty members and technical staffs from the department of Electrical and Electronics Engineering, PSG College of technology and also my Sincere thanks to Mr. S. Thirumalairajan Lecturer and Mrs D. Sujatha Lecturer, Department of Mechatronics Engineering, PSG Polytechnic College, for constantly supporting us throughout the project work. Finally, we extend our heartfelt thanks to My Wife, Parents and Friends for their constant encouragement and moral support.