You are on page 1of 2

PSG PSG INDUSTRIAL INSTITUTE, COIMBATORE

PUMP PERFORMANCE CURVE


R6-40/8/3 HP,50 mm ,380,19-1569
90 45

DECLARED VALUES:

80 40 HEAD : 56 M

DISCHARGE : 1.8 lps

70 35 O.A.EFFI : 31.5 %

CURRENT : 7.1 A
Scale 1 mm =
Head (m)

60 30 HEADRANGE : 62/42
M

ACTUAL VALUES:
50 25
HEAD : 69.5 M

DISCHARGE : 2.2 lps


40 20
O.A.EFFI : 36.7
%
30 15 CURRENT : 6.6 A

PASS
20 10

10 5

Overall Efficiency(%),Current(A)
0 Scale
0 1 mm =
0 1 2 3 4 5 6
Head (m) Oveall Efficiency(%) Discharge in LPS, 1 mm=
Current(A)
PSG INDUSTRIAL INSTITUTE,COIMBATORE
PSG
PUMP PERFORMANCE TEST REPORT

NAME PLATE DATA TEST DATA

Serial No : :19-1569 Type R6 - 40/8/3 HP Type of dr


iver : 3 HP Sub Motor Pressure Gauge P16 Ref. : IS:8034-2002
Size (mm): 50 kW / HP 2.2 / 3.0 Test Panel No. : 1 Vacuum Gauge : --- Date of test : 19.5.09
Head (m): 56 Current ( A) 7.09 Ammeter const. : 5 Distance between Del. Gauge Tested by : M.G
Discharge (lps): :1.8 Supply : 3 PH, AC , 380 V Wattmeter const. : 8 & Water level.(m) : 1.7
Overall Effi. ( :31.5 Freq. (Hz.) : 50 Tacho meter No. : 1 dd (mm) : 50
Speed (rpm2850 Class of Supply : 3 Ph,AC Size of Vol.tank (m2) & No.: 1.0 2
headrange (m):62/42 Insulation : Category B Test voltage (V) : 380 V Stop watch No. : 1
FLOW POWER
HEAD

S.No Speed Delivery Velocity Total Head at Rise Time Discharge WattmeterPower input Pump Overall
gauge head head rated in for Discharge at rated Current reading at rated output Efficiency Frequency
reading correction freg Tank Rise freq freq
rpm Kgf/cm2 m m m cm Sec Lps Lps Lpm A kW kW kW % Hz
1 2851 0.00 0.418 2.12 2.18 30.00 54.19 5.54 5.62 337.22 6.18 4.060 4.248 0.120 2.83 49.25

2 2841 2.00 0.313 22.01 22.83 30.00 62.77 4.78 4.87 292.02 6.43 4.300 4.541 1.089 23.99 49.10

3 2836 3.00 0.264 31.96 33.16 30.00 68.34 4.39 4.47 268.27 6.58 4.380 4.628 1.454 31.41 49.09

4 2834 4.00 0.208 41.91 43.53 30.00 77.07 3.89 3.97 238.03 6.58 4.480 4.742 1.693 35.70 49.06

5 2835 5.00 0.157 51.86 53.84 30.00 88.74 3.38 3.44 206.68 6.58 4.480 4.740 1.818 38.36 49.07

6 2835 6.00 0.096 61.80 64.29 30.00 113.52 2.64 2.70 161.73 6.43 4.100 4.351 1.699 39.05 49.02

7 2850 6.50 0.065 66.77 69.52 30.00 138.00 2.17 2.22 133.10 6.15 3.880 4.122 1.512 36.67 49.00

8 2872 7.50 0.000 76.70 79.86 0.00 0.00 0.00 0.00 0.00 5.08 2.960 3.145 0.000 0.00 49.00

Date: :INCHARGE TESTING Sr.ENGINEER RMD:

Remarks:

You might also like