This document provides specifications for the SP 3A-15 submersible pump. The pump has a rated flow of 3 m3/h, rated head of 67 m, and is powered by a 1.1 kW motor running at 2820-2850 rpm. Key features include 15 stages, stainless steel and plastic materials, IP68 enclosure, and operating in water from -15 to 40°C. Electrical data includes 1x230V power supply, 8A current, and 0.99 power factor.
This document provides specifications for the SP 3A-15 submersible pump. The pump has a rated flow of 3 m3/h, rated head of 67 m, and is powered by a 1.1 kW motor running at 2820-2850 rpm. Key features include 15 stages, stainless steel and plastic materials, IP68 enclosure, and operating in water from -15 to 40°C. Electrical data includes 1x230V power supply, 8A current, and 0.99 power factor.
This document provides specifications for the SP 3A-15 submersible pump. The pump has a rated flow of 3 m3/h, rated head of 67 m, and is powered by a 1.1 kW motor running at 2820-2850 rpm. Key features include 15 stages, stainless steel and plastic materials, IP68 enclosure, and operating in water from -15 to 40°C. Electrical data includes 1x230V power supply, 8A current, and 0.99 power factor.
General information: Product name: SP 3A-15 100 100
Product No: 10007515 90 90
EAN number: 5700390303303 80 80 Technical: Pump speed on which pump data are based: 70 70 2900 rpm 60 60 Rated flow: 3 m³/h 50 50 Rated head: 67 m Stages: 15 40 40 Number of reduced-diameter impellers: NONE 30 30 Shaft seal for motor: LIPSEAL 20 20 Approvals: CE,EAC Curve tolerance: ISO9906:2012 3B 10 10 Model: A 0 0 Motor version: T40 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Q [m³/h]
Return valve: YES Pumped liquid = Water
Liquid temperature during operation = 20 °C Specification for shaft end: SPLINE Density = 998.2 kg/m³ Materials: P [kW] Pump: Stainless steel Pump: EN 1.4301 1.6 P1 Pump: AISI 304 1.4 Impeller: Stainless steel 1.2 Impeller: EN 1.4301 1.0 Impeller: AISI 304 0.8 P2 Motor: Stainless steel Motor: DIN W.-Nr. 1.4301 0.6 Motor: AISI 304 0.4 Installation: 0.2 Maximum operating pressure: 15 bar 0 Maximum outlet pressure: 9.5 bar Type of connection: Rp Size of connection: 1 1/4 inch Motor diameter: 4 inch Minimum borehole diameter: 105 mm Liquid: Pumped liquid: Water Liquid temperature range: -15 .. 40 °C Max liquid t at 0.15 m/sec: 40 °C Selected liquid temperature: 20 °C Density: 998.2 kg/m³ Electrical data: Motor type: MS402 Motor type 1-phase: PSC Motor flange design: GRUNDFOS Rated power - P2: 1.1 kW Power (P2) required by pump: 1.1 kW Mains frequency: 50 Hz Rated voltage: 1 x 220-230-240 V Rated current: 8.00-8.20-8.40 A Starting current: 430-440 % Cos phi - power factor: 0.99-0.96-0.92 Rated speed: 2820-2830-2850 rpm Start. method: direct-on-line Enclosure class (IEC 34-5): IP68 Insulation class (IEC 85): B Built-in motor protection: CONTACT Thermal protec: internal Built-in temp. transmitter: no Length of cable: 1.7 m Power cable type: FLAT Motor No: 79753405 Windings: Enamelled Others:
Printed from Grundfos Product Centre [2023.12.002]
Description Value Minimum efficiency index, MEI ≥: 0.70 Net weight: 15.5 kg Gross weight: 17.3 kg Shipping volume: 0.016 m³
Printed from Grundfos Product Centre [2023.12.002]