Professional Documents
Culture Documents
MR 313 Cabriolet 6
MR 313 Cabriolet 6
BODY SEALING
77 11 192 972
FEBRUARY 1997
All copyrights reserved by Renault.
Edition Anglaise
"The repair methods given by the manufacturer in this document are based on the technical specifications current when it was prepared. The methods may be modified as a result of changes by the manufacturer in the production of the various component units and accessories from which his vehicles are constructed".
Copying or translating, in part or in full, of this document or use of the service part reference numbering system is forbidden without the prior written authority of Renault.
Renault 1997
64 WINDOW SEALING
Windscreen pillar seal 64-1
64
12436R PRE6401
Slide the seal so that the end (A) is positioned with the corner of the windscreen aperture.
REMOVAL - REFITTING
Close and lock the hood. After removing the front locks and the trims, remove the seal. Check the sideways alignment with the hood seal. A clearance of 1 mm must be obtained between the seals (longitudinal clearance).
12437S
64-1