You are on page 1of 2

Home Appliance Control using Voice command

This project is designed to control the home appliances through voice (on/off) control as dictated by the person Switch on Fan, Switch Off Light etc. The Voice Recognition involves HM2007 IC which is dedicated to process the voice inputs. Master Controller: A pic Micro controller will act as a master controller for the switching of devices. Voice Controller: A voice said in front of the mic is converted to text by the Voice Recognition IC HM2007 and is fed as a input to the controller, so the controller reacts to it. Software Driver in Hitech C This is a software tool used to control the angular position i.e., to send specified pulses with controlled timing to vary the speed as when and where required.

Block Diagram

MIC

Power Supply

HM2007Voice Recognition IC

Pic Microcontroller Interface Board

Relay Drivers

RL1

RL2

RL3

RL4

Fan

Light

TV

Radio

You might also like