Professional Documents
Culture Documents
10 Gigabit Ethernet Technology
10 Gigabit Ethernet Technology
INTRODUCTION
Ethernet essential for internet. 10 Gigabit Ethernet is the latest. It finds its applications in LAN, MAN, WAN and SAN. Provides high speed and reliable network.
HISTORY
Developed by Robert Metcalfe and David Boggs in 1973
at Xerox PARC. In June 2002 IEEE adopted 10 Gigabit Ethernet Standard(802.3ae).
10 GbE STANDARD
Under the International Standards Organizations Open Systems Interconnection (OSI) model, Ethernet is fundamentally a Layer 2 protocol. IEEE 802.3ae was adapted to include 10-Gbps fullduplex transmission over fiber-optic cable. 10 Gigabit Ethernet uses the IEEE 802.3 Ethernet Media Access Control (MAC) protocol, the IEEE 802.3 Ethernet frame format, and the minimum and maximum IEEE 802.3 frame size. 10 Gigabit Ethernet remains true to the original Ethernet model.
5
10 GbE ARCHITECTURES
10 Gigabit Ethernet uses two separate encoding steps. The encoded data provides synchronization, efficient usage of bandwidth, and improved signal-to-noise ratio characteristics. All 10GbE varieties use optical fiber media.
850nm
1310nm 1550nm
Serial PMD
10-Gigabit Ethernet
Full duplex only
New optical PMDs New coding schemes 64B/66B
Optical/copper media
Support LAN to 5 km
CHIP INTERFACE(XAUI)
The XAUI is designed as an interface extender, and the interface, which it extends, is the XGMII, the 10 Gigabit Media Independent Interface.The XGMII is a 74 signal wide interface (32-bit data paths for each of transmit and receive) that may be used to attach the Ethernet MAC to its PHY. Benefits of XAUI technology - low EMI due to it's selfclocked nature, compensation for multi-bit bus skew -allowing significantly longer-distance chip-to-chip -error detection and fault isolation capabilities, low power consumption, and the ability to integrate the XAUI I/O within commonly available CMOS processes.
9
10
PHYSICAL LAYER(PHYs)
The LAN PHY and the WAN PHY will operate over common PMDs and, therefore, will support the same distances. . The 10 Gigabit LAN PHY is intended to support existing Gigabit Ethernet applications at ten times the bandwidth with the most cost-effective solution. The 10 Gigabit Ethernet WAN PHY supports connections to existing and future installations of SONET/SDH (Synchronous Optical Network/Synchronous Digital Hierarchy) circuit-switched telephony access equipment.
11
Ethernet technology is already the most deployed technology for high performance LAN environments.
With the extension of 10 Gigabit Ethernet into the family of Ethernet technologies, the LAN now can reach farther and support up coming bandwidth hungry applications. With 10 Gigabit backbones installed, companies will have the capability to begin Gigabit Ethernet service to workstations and, eventually, to the desktop in order to support applications such as streaming video, medical imaging, centralized applications, and high-end graphics.
12
Gigabit Ethernet is already being deployed as a backbone technology for dark fiber metropolitan networks. With appropriate 10 Gigabit Ethernet interfaces, optical transceivers and single mode fiber, service providers will be able to build links reaching 40km or more.
10 Gigabit Ethernet will provide infrastructure for both network-attached storage (NAS) and storage area networks (SAN).
13
10 Gigabit Ethernet will enable Internet service providers (ISP) and network service providers (NSPs) to create very high-speed links at a very low cost, between co-located, carrier-class switches and routers and optical equipment that is directly attached to the SONET/SDH cloud.
10 Gigabit Ethernet with the WAN PHY will also allow the construction of WANs that connect geographically dispersed LANs between campuses or POPs (points of presence) over existing SONET/SDH/TDM networks.
14
10 Gigabit Ethernet is in a position to replace all these proprietary technologies as a next-generation interconnect for both server and storage-area networks for several reasons:
Cost-Saving Server Consolidation. 10 Gigabit Ethernet Offers the Necessary Bandwidth. Planned Growth of 10 Gigabit Network Features.
15
16
IEEE 802.3 has recently formed two new study groups to investigate 10 Gigabit Ethernet over copper cabling.
The 10GBASE-CX4 study group is developing a standard for transmitting and receiving XAUI signals via a 4-pair twinax cable, commonly referred to as a 4x InfiniBand cable. The 10GBASE-T study group is developing a standard for the transmission and reception of 10 Gigabit Ethernet via a Category 5 or better unshielded twisted pair (UTP) copper cable up to 100 m.
17
Extension of existing Ethernet family of standards Another 10x jump for higher capacity
18
CONCLUSION
10 Gigabit Ethernet is very much necessary for todays network and is viable now.
10 Gigabit Ethernet forms the backbone of todays network due to its enhanced features.
In future it will provide more better networking solutions as continuous efforts have been put into it to upgrade it.
19
THANKYOU !!!!!!!!
20