Professional Documents
Culture Documents
Butterfly Valves D6..N / D6..NL. Economical and Efficient Control
Butterfly Valves D6..N / D6..NL. Economical and Efficient Control
The butterfly valve product range D6..N / D6..NL comprises nominal diameters from DN 25 to DN 700. A practically equal percentage valve characteristic curve can be achieved in the opening range of 0...54. Because of the low pressure losses, considerable energy savings can be realised in applications such as injection circuits with 2-way, open heat exchangers or in cold and hot water circuits in general. Butterfly valves and actuators also have proven the reliability of their operational safety in practice even under difficult conditions. For the user, this means: Costs can be reduced, not only with the procurement of the inexpensive butterfly valve and actuator combinations but also during operation!
A wide product range of modulating actuators with torques from 18 to 3500 Nm for indoor (IP54) and outdoor (IP66/67) applications is available for the motorisation of the D6..N / D6..NL butterfly valves. Their rapid running times make for improved control quality. Special MF types make it possible to adjust the actuators onsite precisely to the respective application. With the MP types, up to eight actuators can be combined in one MP-Bus line and integrated in all conventional field bus systems. The cabling costs for the bus integration can be lowered by as much as 90%.
Nominal diameters DN [mm] D625N D632N D640N D650N D665N D680N D6100N D6125N D6150N D6200N D6250N D6300N D6350N D6400N D6450N D6500N D6600N D6700N
1) 1) 1)
With the maximum permissible medium speed of 4 m/s kv max [m3/h] 45 55 70 90 180 300 580 820 1600 2900 4400 7300 10900 14200 18800 24100 37300 42800 pv100 1) [kPa] 1.6 2.5 3.4 3.1 2.4 2.4 2.1 2.0 1.5 1.5 1.4 1.2 0.8 1.0 0.9 0.7 0.7 1.0 kvs@54 [m3/h] 16 19 25 32 63 105 203 287 560 1015 1540 2555 3815 4970 6580 8435 13055 14980 pv@54 2) [kPa] 2.9 5.0 6.8 8.2 6.6 5.1 4.8 5.1 3.5 3.1 3.3 2.6 1.8 2.0 1.9 1.8 1.6 2.3
25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700
D650NL D665NL D680NL D6100NL D6125NL D6150NL D6200NL D6250NL D6300NL D6350NL D6400NL D6450NL D6500NL D6600NL D6700NL
Differential pressure pv@54 [kPa] listed in the table may not be exceeded. D6..N / D6..NL flow rate characteristic curves
kv /kv max. 100%
The S-shaped characteristic curve of the D6..N / D6..NL butterfly valve corresponds approximately to the equal percentage characteristic curve pursuant to VDI 2176. It is only in the angle of rotation range between 0...54 that one can speak of an approximately equal percentage characteristic curve. For an opening angle of 54, the kvs corresponds to 35% of the kv max value for a 90 opening angle. The power factor n(gl) of the equal percentage valve characteristic curve is 2.5. The effective volumetric flow is calculated as follows:
1)
2)
54
72
Opening angle
Modulating actuators for butterfly valves. With wafer type and lug type.
IP54 Nominal diameters DN [mm] D625N D632N D640N D650N D665N D680N D6100N D6125N D6150N D6200N D6250N D6300N D6350N D6400N D6450N D6500N D6600N D6700N
1) 1) 1)
IP66/67
IP54 + 66
IP54 + 66
IP54
IP54 + 66
Specification of the closing pressure ps in kPa SR..-5 [20 Nm] 1200 1200 1200 1200 1200 1200 200
3)
25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700
D650NL D665NL D680NL D6100NL D6125NL D6150NL D6200NL D6250NL D6300NL D6350NL D6400NL D6450NL D6500NL D6600NL D6700NL
Valve specifications: Butterfly valve with epoxy powder coating, valve cones and internal components made of stainless steel Rated pressure ps: 1600 kPa Media: Cold and hot water (water with glycol up to max. 50% vol.) Medium temperature: 20C to + 120C Leakage rate: A (tight in accordance with EN 12266-1) Angle of rotation: 0 to 90 Flange dimensions D6..N (wafer type) DN 25...DN 200: PN6, PN10, PN16 DN 250...DN 350: PN10 (upon request), PN16 DN 400...DN 700: PN16 Flange dimensions D6..NL (lug type) DN 50...DN 150: PN10, PN16 DN 200...DN 700: PN16 Maintenance-free
Actuator product range Open-close/modulating 24 volt: SR..-5, SR..P-R, GR..-5, GR..-7, DR..-7, DGR..-7 and SY2..-SY5.. (available in versions -SR, -MF, -MP) Open-close/modulating 230 volt: SR..-5, SR..P-R, DR..-7, DGR..-7 and SY2..-SY12.. (available in versions -SR, -MF) SY actuators: Electrical installation with 3-lead or 4-lead connection technology possible. Unlimited cable length with 4-wire connection technology, whereby the signal and mains connection have different ground connections. Actuator specifications SR types: not parameterisable MF types: Angle of rotation, running time (excluding SY..) and control and position feedback signal can be adjusted individually on-site MP types: Linkage possible with all conventional field bus systems, parameterisable the same as MF types
IP66/67
600 2) 200 2)
1) 2)
Upon request Butterfly valve-actuator combinations starting with DN 400 are now shipped pre-mounted only. Because the mounting kit is installed automatically, it does not need to be ordered separately in addition. Spring-return actuator SRF.. with degree of protection IP54 available
3)
As an alternative, a wide product range of manually operated A6.. shut-off valves is available. Please contact your Belimo representative.
Interfaces
F05 / F07
F03...F16
Form-fit
ZP..
ZS..
ZSF..
ZG..
ZSY..
Third-party valves
Third-party ball valves Rotary actuators Torque 24 VAC/DC 230 VAC 2-wire control 1-wire control Modulating control Emergency control function Manual override Auxiliary switch Degree of protection Accessories IP54 Accessories IP66/67 SR..P..-R 18 Nm SR..-R 20 Nm
Accessories IP54
IP67
optional IP54
A wide product range of actuators and adapters is available for the motorisation of third-party valves. Various types of actuation such as openclose, modulating or multifunctional (MF) are as readily available as are versions for extreme environmental conditions. Further information: www.belimo.com/retrofit
All-inclusive.
5-year warranty On site around the globe A complete range of products from one source Tested quality
BELIMO Holding AG Brunnenbachstrasse 1 CH-8340 Hinwil Tel. +41 (0)43 843 61 11 Fax +41 (0)43 843 62 68 info@belimo.ch www.belimo.com
Argentina Australia Austria Bahrain Belgium Bosnia-Herzegovina Brazil Bulgaria Canada Chile Croatia Cyprus Czech Republic
Denmark Egypt Estonia Finland France Great Britain Germany Greece Hong Kong Hungary Iceland India Indonesia Ireland Israel Italy Japan Jordan Kuwait Latvia Lebanon
Liechtenstein Lithuania Luxembourg Macedonia Malaysia Mexico Morocco Netherlands New Zealand Norway Oman Pakistan Peoples Republic of China Philippines Poland Portugal Qatar Republic of Korea (South Korea) Romania
Russia Saudi Arabia Serbia-Montenegro Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Turkey Ukraine United Arab Emirates United States of America
Headquarters