Safety Instructions
1.1 General safety information
Warning
The stepping motor controller conforms to protection class 1P20 and
contamination class 1. Ensure that the working environment also complies with
this protection/contamination class.
Warning
A Use only accessories and spare parts which are approved of by the manufacturer.
Warning
In accordance with the EN standards and the VDE regulations, the stepping motor
controllers must be connected to the grid in such a way that they can be
disconnected using appropriate isolating equipment (e.g. main switch, contactor,
circuit breaker)
Warning
Gold contacts or contacts with high contact pressure should be used for
switching the contro! contacts.
Precautionary measures must be taken for preventing interference to switching
systems, e.g. switching protective switches and relays with RC elements or
diodes.
You must observe the safety regulations and directives of the country in which
the device is to be used.
A Warning
The environmental conditions specified in the product documentation must be
observed.
Safety-critical applications are not permitted if they are not explicitly approved
by the manufacturer.
The manufacturer of the system or machine is responsible for
ensuring that the limit values required by the national regulations
are observed.