Professional Documents
Culture Documents
Supported at Commands v2.8.1
Supported at Commands v2.8.1
Includes: AC875 / AC875U AC880 / AC880E / AC880U AC881 / AC881U C885 C888 MC8775 / MC8775V MC8780 / MC8781 MC8785V MC8790 / MC8790V MC8791V MC8792V
Preface
Important Notice
Duetothenatureofwirelesscommunications,transmission andreceptionofdatacanneverbeguaranteed.Datamaybe delayed,corrupted(i.e.,haveerrors)orbetotallylost. Althoughsignificantdelaysorlossesofdataarerarewhen wirelessdevicessuchastheSierraWirelessmodemareusedin anormalmannerwithawellconstructednetwork,theSierra Wirelessmodemshouldnotbeusedinsituationswherefailure totransmitorreceivedatacouldresultindamageofanykind totheuseroranyotherparty,includingbutnotlimitedto personalinjury,death,orlossofproperty.SierraWireless acceptsnoresponsibilityfordamagesofanykindresulting fromdelaysorerrorsindatatransmittedorreceivedusingthe SierraWirelessmodem,orforfailureoftheSierraWireless modemtotransmitorreceivesuchdata. DonotoperatetheSierraWirelessmodeminareaswhere blastingisinprogress,whereexplosiveatmospheresmaybe present,nearmedicalequipment,nearlifesupportequipment, oranyequipmentwhichmaybesusceptibletoanyformof radiointerference.Insuchareas,theSierraWirelessmodem MUSTBEPOWEREDOFF.TheSierraWirelessmodemcan transmitsignalsthatcouldinterferewiththisequipment. DonotoperatetheSierraWirelessmodeminanyaircraft, whethertheaircraftisonthegroundorinflight.Inaircraft,the SierraWirelessmodemMUSTBEPOWEREDOFF.When operating,theSierraWirelessmodemcantransmitsignalsthat couldinterferewithvariousonboardsystems.
Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time.
Limitation of Liability
REVENUEORANTICIPATEDPROFITSORREVENUE ARISINGOUTOFTHEUSEORINABILITYTOUSEANY SIERRAWIRELESSPRODUCT,EVENIFSIERRAWIRELESS AND/ORITSAFFILIATESHASBEENADVISEDOFTHE POSSIBILITYOFSUCHDAMAGESORTHEYARE FORESEEABLEORFORCLAIMSBYANYTHIRDPARTY. Notwithstandingtheforegoing,innoeventshallSierra Wirelessand/oritsaffiliatesaggregateliabilityarisingunderor inconnectionwiththeSierraWirelessproduct,regardlessof thenumberofevents,occurrences,orclaimsgivingriseto liability,beinexcessofthepricepaidbythepurchaserforthe SierraWirelessproduct.
Patents
Thisproductmaycontaintechnologydevelopedbyorfor SierraWirelessInc.Thisproductincludestechnologylicensed fromQUALCOMM3G.Thisproductismanufacturedorsold bySierraWirelessInc.oritsaffiliatesunderoneormore patentslicensedfromInterDigitalGroup. 2011SierraWireless.Allrightsreserved. AirCardandHeartoftheWirelessMachineareregistered trademarksofSierraWireless.Watcherisatrademarkof SierraWireless,registeredintheEuropeanCommunity. SierraWireless,theSierraWirelesslogo,theredwavedesign, andtheredtippedantennaaretrademarksofSierraWireless. WindowsisaregisteredtrademarkofMicrosoftCorporation. QUALCOMMisaregisteredtrademarkofQUALCOMM Incorporated.Usedunderlicense. Othertrademarksarethepropertyoftherespectiveowners.
Copyright Trademarks
Contact Information
Sales Desk:
Post: Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Fax: 1-604-231-1109 Web: www.sierrawireless.com
2130617
Preface
Revision History
Revision number 2.3 Release date Jul 2007 Changes
Fixed !TIME (page 53) syntax Added +ECIO (page 33), !GSMINFO (page 36), !NVPORTSET (page 39), !SMSSTSEN (page 48) commands Added detail for !SMSRETRY (page 47) Updated !TIME (page 53) syntax Added band indexes (0C,0D) and clarified query use for !BAND (page 29) Clarified !NVBACKUP (page 63) options Clarified +ECIO (page 33) and +USET (page 55) Added C885 / C888 / MC8790 / MC8790V to supported modems list Updated minimum firmware revisions Updated supported modems lists for several commands Updated !GRELIMEI (page 35) Added !SCPROFDEL (page 44), !SDNOTINSTALLED (page 45), !SIMNOTINSTALLED (page 46)! Changed Support status to Yes for supported AT commands described in Chapter 2: +CMMS, +CPOL, +CPUC, +CTFR, +DS, &F, O, +VTD, +VTS Added MC8791V and MC8792V to supported modems list Added WCDMA900 content to !BAND (page 29) and !GSTATUS (page 38) Added +ETFCI Indicated support for +CIEV, +CIND, +CMER Moved !AUTH and !GCIPHER into different chapters Added general and AT command indexes Updated Patents statement
2.4 2.5
2.6
Jul 2008
2.7
Sep 2008
2.8
Apr 2009
2.8.1
Feb 2011
2130617
Table of Contents
About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Result codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Terminology and acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Current firmware versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Document structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Supported GSM / WCDMA AT Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Modem Status, Customization, and Reset Commands . . . . . . . . . . . . . . . . . .27 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Command summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Command reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Diagnostic Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Command summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Command reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Test commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Command summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Command reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Memory Management Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Command summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Command reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 SIM Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Command summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Command reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Index (AT commands) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
2130617
Introduction
ThisdocumentdescribesstandardandproprietaryAT commandsthatareavailableforusersofUMTSAirCard modems,Compassmodems,andMiniCardembedded modules. Thestandard3GPPATcommandsforUMTSdevicesare describedintwostandardsdocumentsavailablefromthe 3GPP(3rdGenerationPartnershipProject)website, www.3gpp.org: TS27.007ATcommandsetforUserEquipment(UE) TS27.005UseofDataTerminalEquipmentDataCircuit terminatingEquipment(DTEDCE)interfaceforShortMessage Service(SMS)andCellBroadcastService(BSE)
Note: When designing applications that use these AT commands, use Watcher (and other Sierra Wireless applications) as functionality templates to ensure proper use of command groups. For questions or concerns relating to command implementation, please contact your Sierra Wireless account representative.
Result codes
Resultcodesarenotshowninthecommandtablesunless specialconditionsapply.GenerallytheresultcodeOKis returnedwhenthecommandhasbeenexecuted.ERRORmay bereturnedifparametersareoutofrange,andwillbe returnedifthecommandisnotrecognizedorisnotpermitted inthecurrentstateorconditionofthemodem.
Document
Thisdocumentisrevisedperiodicallyasnew firmwareversionsarereleased.Thiseditionis:
Rev 2.8.1 Feb.11
Each commandlistedinthisguideincludesalistofsupporting AC8xxandMC87xxmodules.Unlessotherwisenoted,the followingminimumfirmwarerevisionsarerequiredto supportthelistedcommands: AC875/MC8775/MC8775VRevisionH1_0_0_0or higher AC880/MC8780/MC8781RevisionD1_0_3_0ap/ F1_0_0_0aporhigher AC881/AC881URevisionF1_0_0_4aporhigher C885/MC8785VRevisionJ1_0_1_0aporhigher C888/MC8790/MC8790VRevisionK1_0_1_2apor higher MC8791V/MC8792VRevisionK1_0_2_13aporhigher EntertheidentificationcommandAT+GMR Themodemrespondswithversioninformationfor software,firmware,andhardware. ThedetailsfollowingtherevisionnumberincludeSierra Wirelessinformationonthespecificbuildfollowedbythe dateandtimeofthebuild.
+GMR: F/W VER: R1_0_0_
Todetermineyourfirmwarerevision:
10
2130617
Upgrading
Ifyourmodemfirmwareisanearlierversion,youcanacquire updatedfirmwarebycontactingyouraccountmanager.
Document structure
Thisdocumentassumesyouhavethe3GPPTS27.007AT commanddocumentation(seepage9).Thisreferenceincludes achaptercoveringSupported 27.007 AT commands,aswellas theproprietarycommandslistedinthetablesbelow.Each tablecorrespondstoonechapterinthisguide.
Note: The Supporting modems column indicates which modems support each command Mini Card (MC), Compass (C), and AirCard (AC). If an entry is marked with an asterisk (*), a firmware upgrade may be required. See the detailed command entry for details.
11
!PCVOLT
40
!POWERDOWN !REL !RESET +RSCP !SCACT !SCDFTPROF !SCDNS !SCPADDR !SCPROF !SCPROFDEL !SELMODE !SELRAT
40 41 41 41 42 42 43 43 44 44 45 45
Powers down the system Queries the active protocol / revision Resets the modem Returns Received Signal Code Power (RSCP) (WCDMA only) Activates / deactivates PDP context for FIFO interface Queries / sets the default profile ID Queries / sets profile ID DNS address Displays IP address for specified PDP context Queries / sets SWI-specific profile information Erase profile information Queries / sets current service domain Queries / sets current radio access technology (RAT)
12
2130617
!SMSRETRY
47
48 49 51 52 53 54 54 55 57
Enables / disables SMS status reports Enables / disables Call Progress Notification Queries / sets system configuration information Returns service status information Queries / sets current time of day Queries / sets current time of day Displays Primary Scrambling Code (WCDMA only) Displays WCDMA set information Return operating mode AT configuration parameters
a. A firmware upgrade may be required, as noted in the detailed listing for this command.
Diagnostic Commands
Thischapterdescribescommands usedtoselectfrequencybandsanddiagnoseproblems.
Test commands
13
SIM Commands
Thischapterdescribescommandsthat communicatewithaninstalled(U)SIM.
Conventions
Thefollowingformatconventionsareusedinthisreference: Charactercodesorkeystrokesthataredescribedwithwordsor standardabbreviationsareshownwithinanglebracketsusing adifferentfont,suchas<CR>forCarriageReturnand<space> forablankspacecharacter. Numericvaluesaredecimalunlessprefixedasnotedbelow. Hexadecimalvaluesareshownwithaprefixof0x,i.e.inthe form0x3D. Binaryvaluesareshownwithaprefixof0b,i.e.intheform 0b00111101.
14
2130617
Commandandregistersyntaxisnotedusinganalternatefont: !CHAN=<c>[,b].TheATcharactersarenotshownbutmustbe includedbeforeallcommandsexceptasnotedinthereference tables. Charactersthatarerequiredareshowninuppercase;param etersarenotedinlowercase.Requiredparametersare enclosedinanglebrackets(<n>)whileoptionalparametersare enclosedwithinsquarebrackets([x]).Thebracketsarenotto beincludedinthecommandstring. Commandsarepresentedintableformat.Eachchaptercovers thecommandsrelatedtothatsubjectandpresentsasummary tabletohelpyoulocateaneededcommand.Commandsarein ASCIIalphabeticalorderinthebodyofeachchapter. Anydefaultsettingsarenotedinthecommandtables.Note thatthesearethefactorydefaultsettingsandnotthedefault parametervalueassumedifnoparameterisspecified. Thisisanumericortextcodethatisreturned afterallcommands(exceptresets).Onlyoneresultcodeis returnedforacommandlineregardlessofthenumberof individualcommandscontainedontheline.
Result Code
Responsesandresultcodesfromthemodem,orhostsystem softwareprompts,areshowninthisfont:
CONNECT 14400
15
16
2130617
TheITUTspecification,SerialAsynchronousDiallingand Control(RecommendationV.250),isavailableontheInternational TelecommunicationUnionwebsite,www.itu.int,andthe 3GPPspecificationdocuments,3GPPTS27.007V3.13.0(2003 03)and3GPPTS27.007V3.13.0(200303),areavailableonthe 3GPPwebsite,www.3gpp.org. Thetablesbelowidentifywhethereachcommandissupported onAirCardmodems,Compassmodems,andMiniCard embeddedmodules.AnN/AintheSupportedcolumnofthe tableindicatesthatthecommandisrelatedtoafeature(such asvoice)thatisnotavailableonthemodems. Somecommandsarepartiallysupportedthedescriptionsfor thesecommandsidentifyanylimitationsoncommandusage. Also,somecommandsaredescribedinmoredetailinlater chaptersthedescriptionsforthesecommandslinktothose detailedentries(forexample,&VinTable21). Table 2-1: Supported ITU-T Recommendation V.250 AT commands
Command &C &D &F &S &T &V Description Set Data Carrier Detected (Received line signal detector) function mode Set Data Terminal Ready function mode Set all current parameters to manufacturers defaults Set DSR signal Auto tests Return operating mode AT configuration parameters Supported No No Yes No No Yes
17
18
2130617
19
20
2130617
21
22
2130617
23
24
2130617
25
26
2130617
Introduction
Thischapterdescribescommandsusedtoresetthemodem, adjustcustomizationsettings,retrievethefirmwareversion, andmonitorthetemperature,voltage,andmodemstatus.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter. Table 3-1: Modem status commands
Command !BAND !BCINF !BOOTHOLD ^CARDMODE +CLVL +CMUT !CNTI +CQI +CSDONSIO2 +ECIO +ETFCI !GCIPHER !GETBAND !GETRAT !GRELIMEI !GRESET !GSMINFO !GSTATUS Description Selects a set of frequency bands / queries current selection Returns the bootloader version Resets modem and waits in bootloader for firmware download Returns SIM card mode (card type) Sets / returns internal loudspeaker volume Enables / disables uplink voice muting Page 29 30 30 30 31 31
Returns current, available, and supported network technologies 31 Returns or enables / disables return of averaged CQI (Channel Quality Indicator) value (WCDMA only) Configures secondary SIO port for circuit-switched data Returns total Energy per chip per power density value (WCDMA only) Enable / disable / query E-TFCI average value Returns operational status Returns the current active band Returns the current active radio access technology (RAT) Returns the modems production TAC Resets the modem Displays 2G network information Returns operational status 32 32 33 33 38 34 34 35 35 36 38
27
28
2130617
Command reference
Table 3-2: Modem status, customization, and reset commands
Command Description
Note: These band sets are preconfigured by your devices manufacturer. The bands displayed by the query command (AT!BAND=?) depend on this configuration, as shown in this example.
29
!BCINF
Supporting modems: All
!BOOTHOLD
Supporting modems: All
^CARDMODE
Supporting modems: All
30
2130617
+CMUT=<enableFlag> +CMUT=?
Supporting modems: All voice-enabled modems
*CNTI=<n>
Supporting modems: All, with following exceptions: AC875 / 875U (min. FW: H1_1_4_1)
31
+CQI? +CQI=<enableFlag>
Supporting modems: All
Returns or enables / disables return of averaged CQI (Channel Quality Indicator) value (WCDMA only)
This command returns the averaged CQI from the modem. Usage: AT!CQI? returns the average CQI and the number of samples used to determine the average. For example: +CQI: total valid samples 1600, average cqi 26 AT!CQI=<enableFlag> enables or disables the query version of the command (+CQI?) Parameters: <enableFlag> (enable / disable CQI value retrieval): 0 = Disable retrieval 1 = Enable retrieval
CSDONSIO2? !CSDONSIO2=<port#>
Supporting modems: All
32
2130617
+ECIO?
Supporting modems: All
Returns total Energy per chip per power density value (WCDMA only)
This command returns the total energy per chip per power density (Ec/Io) value of the active sets three strongest cells. Usage: AT+ECIO? returns the signed dB values of the three strongest cells in the active set. The values are listed from strongest to weakest, based on RSCP, and separated by tabs. If there are less than three cells, only those values appear. For example: +ECIO: Ec/Io: -3.5 dB -14.0 dB -24.5 dB ---or--- +ECIO: Ec/Io: -7.5 dB Valid range = -31.5 dB to 0 dB The command +USET also displays Tot Ec/Io as one of its outputs.
+ETFCI? +ETFCI=<status>
Supporting modems: MC879x(V) (min. FW: K1_1_1_1ap)
33
!GETBAND?
Supporting modems: All
!GETRAT?
Supporting modems: All
34
2130617
!GRELIMEI?
Supporting modems: All
!GRESET
Supporting modems: All
35
!GSMINFO?
Supporting modems: All, with following exceptions: MC8775 (min. FW: H1_1_8_13mcap) AC875 (min. FW: H1_1_8_13acap)
36
2130617
!GSMINFO (Continued)
<mccmnc> <lac> <cellid> <bsic> <ncc> <bscc> <rac> <minrx> <maxrach> <band> <arfcn> <rxlvl> <c1> <c2> <c31> <c32> <band> <arfcn> <rac> <rxlvl> <c1> <c2> <c31> <c32> <band> <arfcn> <rac> <rxlvl> <c1> <c2> <c31> <c32> <band> <arfcn> <rac> <rxlvl> <c1> <c2> <c31> <c32>
37
!GSTATUS?
Supporting modems: All
38
2130617
!GVER?
Supporting modems: All
^HVER
Supporting modems: All
!PCTEMP?
Supporting modems: All MC modems C885 C888
39
!PCVOLT?
Supporting modems: All MC modems C885 C888
!POWERDOWN
Supporting modems: All
40
2130617
!REL?
Supporting modems: All
!RESET
Supporting modems: All
+RSCP?
Supporting modems: All
41
!SCDFTPROF? !SCDFTPROF=<pid>
Supporting modems: All
42
2130617
!SCPADDR=<pid>
Supporting modems: All
43
44
2130617
!SDNOTINSTALLED?
Supporting modems: C885
45
!SIMNOTINSTALLED?
Supporting modems: AC885 C885 C888 MC8785V MC8790 / 90V MC8791V MC8792V
46
2130617
Note: <interval> ignores the time spent actually performing a retry attempt. If <interval> = 5, attempts are made at elapsedTime = 0, 5, 10, etc. until an attempt is successful or <period> - elapsedTime < <interval>. Example 1: Assume a retry attempt takes 2 seconds. If <period> = 1 and <interval> = 8, and no attempts are successful: time = 0: Retry attempt fails at time = 2. No more attempts are made because <period> has expired. Example 2: Assume a retry attempt takes 2 seconds. If <period> = 3 and <interval> = 5, and no attempts are successful: time = 0: Retry attempt fails at time = 2. No more attempts are made because <period> will expire before the <interval> passes. Example 3: Assume a retry attempt takes 2 seconds. If <period> = 14 and <interval> = 5, and no attempts are successful: time = 0: Retry attempt fails at time = 2; next attempt will begin at time=5 (the <interval> counts from the beginning of the previous attempt) time = 5: Retry attempt fails at time = 7; next attempt will begin at time=10 time = 10: retry attempt fails at time = 12; No more attempts will be made because the <period> will expire before another <interval> of 5 seconds can pass.
47
48
2130617
49
!SWICALLPROG (Continued)
50
2130617
51
^SYSINFO
Supporting modems: All
52
2130617
!TIME=<YYYY>, <MM>, <DD>, <hh>, <mm>, <ss> [, <TZ>, <DST>] !TIME? !TIME=?
Supporting modems: All
53
!UDINFO?
Supporting modems: All
+UPSC
Supporting modems: All
54
2130617
+USET?<set> +USET=?
Supporting modems: All
55
+USET
56
2130617
&V
Supporting modems: All
57
58
2130617
4: Diagnostic Commands
Introduction Command summary Command reference
Introduction
Thischapterdescribescommandsusedtodiagnosemodem problems.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter. Table 4-1: Diagnostic commands
Cmnd !MXSTATS Description Displays / clears 27.010 statistics Page 60
59
Command reference
Table 4-2: Diagnostic command details
Command Description
!MXSTATS=0 !MXSTATS?
Supporting modems: All
60
2130617
5: Test commands
Introduction Command summary Command reference
Introduction
Thischapterdescribescommandsusedtodisplayandclear datathatisstoredifthemodemcrashes.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter. Table 5-1: Test commands
Cmnd !ERR !GCCLR !GCDUMP Description Displays diagnostic information Clears crash dump data Displays the crash dump data Page 61 61 61
Command reference
Table 5-2: Test command details
Command !ERR Supporting modems: All Description
!GCCLR
Supporting modems: All
!GCDUMP
Supporting modems: All
61
62
2130617
Thecommandsinthischapterallowyoutobackupand restorethedatainnonvolatilememory.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter: Table 6-1: Memory management command passwords
Command !NVBACKUP Description Backs up items stored in non-volatile memory Page 63
Command reference
Table 6-2: Memory management command details
Command Description
!NVBACKUP =<category>
Supporting modems: All
63
64
2130617
7: SIM Commands
Introduction Command summary Command reference
Introduction
Thischapterdescribescommandsusedtocommunicatewith aninstalled(U)SIM.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter: Table 7-1: SIM command passwords
Command !AUTH !ICCID Description Runs GSM algorithm on SIM Returns (U)SIM cards ICCID Page 65 66
Command reference
Table 7-2: SIM command details
Command !AUTH = <randNumber> Supporting modems: All Description
65
!ICCID
Supporting modems: All
66
2130617
B
!BAND,set/queryfrequencybands,29 !BCINF,returnbootloaderversion,30 !BOOTHOLD,resetmodemandwaitforf/wdownload, 30
C
&C,setdatacarrierdetected,17 C, ITU T v.24 circuit 109 carrier detect signal behavior command,20 +CACM,accumulatedcallmeter,20 +CACSP, voice group or voice broadcast call state at tributepresentation,20 +CAEMLPP,eMLPPpriorityregistrationandinterroga tion,20 +CAHLD,leaveanongoingvoicegrouporvoicebroad castcall,20 +CAJOIN,acceptincomingvoicegrouporvoicebroad castcall,20 +CALA,alarm,20 +CALCC, list current voice group and voice broadcast call,20 +CALD,deletealarm,20 +CALM,alertsoundmode,21 +CAMM,accumulatedcallmetermaximum,21 +CANCHEV,NCHsupportindication,21 +CAOC,adviceofcharge,21 +CAPD,postponeordismissanalarm,21 +CAPTT,talkeraccessforvoicegroupcall,21 ^CARDMODE,returnSIMcardtype,30 +CAREJ,rejectincomingvoicegrouporvoicebroadcast call,21 +CAULEV,voicegroupcalluplinkstatuspresentation, 21 +CBC,batterycharge,21 +CBM,cellbroadcastmessagedirectlydisplayed,19 +CBMI, cell broadcast message stored in memory at specifiedlocation,19 +CBST,selectbearerservicetype,21 +CCCM,currentcallmetervalue,21 +CCFC,callforwardingnumberandconditions,21 +CCLK,clock,21 +CCUG,closedusergroup,21 +CCWA,callwaiting,21 +CCWE,callmetermaximumevent,21
67
+CLIP,callinglineidentificationpresentation,23 +CLIR,callinglineidentificationrestriction,23 +CLVL,sets/returnsinternalloudspeakervolume,23,31 +CMAR,masterreset,23 +CMEERROR,mobileterminationerrorresultcode,23 +CMEC,mobileterminationcontrolmode,23 +CMEE,reportmobileterminationerror,23 +CMER,mobileterminationeventreporting,23 +CMGC,sendcommand,19 +CMGD,deletemessage,19 +CMGF,messageformat,19 +CMGL,listmessages,19 +CMGR,readmessage,19 +CMGS,sendmessage,19 +CMGW,writemessagetomemory,19 +CMMS,moremessagestosend,19 +CMNA,newmessageacknowledgementtoME/TA,19 +CMOD,callmode,23 +CMSERROR,SMSerror(mobileornetworkerror),19 +CMSS,sendmessagefromstorage,19 +CMT,incomingmessagedirectlydisplayed,20 +CMTI,incomingmessagestoredatspecificmemorylo cation,20 +CMUT,enables/disablesuplinkvoicemuting,23,31 +CMUX,multiplexingmode,23 +CNMA,newmessageacknowledgementtoME,20 +CNMI,newmessageindicationstoTE,20 *CNTI,returncurrent,available,andsupportednetwork technologies,31 +CNUM,subscribernumber,23 +COLP,connectedlineidentificationpresentation,23 +COPN,readoperatornames,23 +COPS,operatorselection,23 +CPAS,phoneactivitystatus,23 +CPBR,readphonebookentries,24 +CPBS,selectphonebookmemorystorage,24 +CPBW,writephonebookentry,24 +CPFB,findphonebookentries,24 +CPIN,enterPIN,24 +CPMS,preferredmessagestorage,20 +CPOL,preferredoperatorlist,24 +CPROT,enterprotocolmode,24 +CPUC,priceperunitandcurrencytable,24 +CPWC,powerclass,24 +CPWD,changepassword,24 +CQI,enable/disable/returnaveragedCQIvalue,32 +CR,servicereportingcontrol,24 +CRC,cellularresultcode,24 +CREG,networkregistration,24 +CRES,restoresettings,20 +CRING,incomingcalltype,24 +CRLP,radiolinkprotocol,24 +CRMP,ringmelodyplayback,24 +CRSL,ringersoundlevel,24 +CRSM,restrictedSIMaccess,24 +CSAS,savesettings,20 +CSCA,servicecentreaddress,20 +CSCB,selectcellbroadcastmessagetype,20 +CSCC,securecontrolcommand,24
+CSCS,selectTEcharacterset,24 +CSDF,settingsdateformat,24 +CSDH,showtextmodeparameters,20 !CSDONSIO2,configuresecondarySIOportforCSdata, 32 +CSGT,setgreetingtext,24 +CSIL,silencecommand,24 +CSIM,genericSIMaccess,24 +CSMP,settextmodeparameters,20 +CSMS,selectmessageservice,20 +CSNS,singlenumberingscheme,24 +CSQ,signalquality,24 +CSSN,supplementaryservicenotifications,24 +CSTA,selecttypeofaddress,24 +CSTF,settingstimeformat,24 +CSVM,setvoicemailnumber,25 +CTFR,calldeflection,25 +CTZR,timezonereporting,25 +CTZU,automatictimezoneupdate,25 +CUSD,unstructuredsupplementaryservicedata,25 +CV120,v.120rateadaptionprotocol,25 +CVHU,voicehangupcontrol,25 +CVIB,vibratormode,25
D
&D,setDTRfunctionmode,17 D,dial,18 D,ITUTV.25terdialcommand,25 D99<n>#,setuppacketdatacallbasedonprofileID #<n>,25 D99#,setuppacketcallbasedonprofileID#1,25 D><MEM><N>,originatecalltophonenumberinmem ory,18 D><N>,originatecalltophonenumberincurrentmem ory,18 D><STR>,originatecalltophonenumbercorresponding toa/nfield,18 DL,rediallastphonenumberused,18 +DR,V42biscompressionreport,18 +DS,V42bisdatacompress,18
E
E,setcommandechomode,18 +ECIO, returntotalenergyperchipperpowerdensity value,33 !ERR,displaydiagnosticinformation,61 +ETFCI,enable/disable/queryETFCIaveragevalue,33
F
&F,setcurrentparameterstodefaults,17
G
+GCAP,RequestcompleteTAcapabilitieslist,18
68
2130617
Index
!GCCLR,clearcrashdumpdata,61 !GCDUMP,displaycrashdumpdata,61 !GCIPHER, enable/disable ciphering and integrity set tings,34 !GETBAND,returncurrentactiveband,34 !GETRAT,returncurrentactiveRAT,34 +GMI,requestmanufactureridentification,18 +GMM,requestTAmodelidentification,18 +GMR,requestTArevisionidentification,18 +GOI,requestglobalobjectidentification,18 !GRELIMEI,returnmodemsproductionTAC,35 !GRESET,resetthemodem,35 !GSMINFO,display2Gnetworkinformation,36 +GSN,requestTAserialnumberidentification,18 !GSTATUS,returnoperationalstatus,38 !GVER,returnfirmwareversion,39
Q
Q,setresultcodepresentationmode,18
R
!REL,querytheactiveprotocol/revision,41 !RESET,resetthemodem,41 !RSCP,returnRSCP,41
S
&S,setDSRsignal,17 S0,setnumberofringsbeforeautoanswer,18 S10,setdisconnectdelayafterindicatingabsenseofdata carrier,19 S3,setcommandlineterminationcharacter,19 S4,setresponseformattingcharacter,19 S5,setcommandlineeditingcharacter,19 S6,setpausebeforeblinddialing,19 S7,setnumberofsecondstowaitforconnectioncomple tion,19 S8, set number of seconds to wait when comma dial modifierused,19 !SCACT,activate/deactivatePDPcontextforFIFOinter face,42 !SCDFTPROF,query/setthedefaultprofileID,42 !SCDNS,query/setprofileIDDNSaddress,43 !SCPADDR,displayIPaddressforPDPcontext,43 !SCPROF,query/setSWIspecificprofileinformation,44 !SCPROFDEL,eraseprofileinformation,44 !SDNOTINSTALLED,returnSDinstallationstatus,45 !SELMODE,query/setcurrentservicedomain,45 !SELRAT,query/setcurrentRAT,45 !SIMNOTINSTALLED,returnSIMinstallationstatus,46 !SMSRETRY,query/setSMSretryperiodandinterval,47 !SMSSTSEN,enable/disableSMSstatusreport,48 !SWICALLPROG, enable/disable call progress notifica tion,49 ^SYSCONFIG,query/setsystemconfigurationinforma tion,51 ^SYSINFO,returnservicestatusinformation,52
H
H,disconnectexistingconnections,18 ^HVER,returnmodemhardwareversion,39
I
I,displayproductidentificationinformation,18 !ICCID,returnSIMcardsICCID,66 +ICF,setTETAcontrolcharacterframing,18 +IFC,setTETAlocaldataflowcontrol,18 +ILRR,setTETAlocalratereportingmode,18 +IPR,setfixedlocalrate,18
L
L,setmonitorspeakerloudness,18
M
M,setmonitorspeakermode,18 !MXSTATS,display/clear27.010statistics,60
N
!NVBACKUP,backupnonvolatilememory,63 !NVPORTSET,assignUSBendpointATport,39
T
&T,autotests,17 T,selecttonedialing,19 !TIME,query/setcurrenttimeofday,53
O
O,switchfromcommandmodetodatamode,18
U P
P,selectpulsedialing,18 !PCTEMP,returncurrenttemperatureinformation,39 !PCVOLT,returncurrentpowersupplyvoltageinforma tion,40 !POWERDOWN,powerdownthesystem,40 !UDINFO,returninformationfromactiveUSBdescrip tor,54 !UPSC,displayprimaryscramblingcode,54 +USET,displayWCDMAsetinformation,55
69
V
&V,returnATconfigurationparameters,17,57 V,setresultcodeformatmode,19 +VTD,toneduration,25 +VTS,DTMFandarbitrarytonegeneration,25
+WS46,PCCASTD101selectwirelessnetwork,25
X
X,setconnectresultcodeformatandcallmonitoring,19
W
&W,Storeparametertouserdefinedprofile,18
Z
Z,setallcurrentparameterstouserdefinedprofile,19
70
2130617
Index
Numerics
27.010statistics,display/clear60 2Gnetworkinformation,return36 3GPP 27.005commands,list19 27.007commands,list20 ATcommands,references9 channelnumber currentGSM,return38 currentWCDMA,return38 ChannelQualityIndicator.SeeCQI. cipheringandintegritysettings,enable/disable34 commonpilotchannel,display55 configurationbufferlabel,query/set44 contextactivationmode,query/set44 CPICH,display55 CQI averaged,display32 averaged,enable/displaydisplay32 crashdata clear61 display61
A
acronyms10 applicationautolaunch,query/set44 ARFCN,2G,return36 ATcommandparameters,display57 ATcommands 3GPP27.005commands,list19 3GPP27.007commands,list20 3GPP,standard9 ITUTV.250commands,list17 ATport,USBendpointmapping39
D
diagnosticinformation,display61 DISC(Tx/Rx)statistics,display/clear60 DM(Tx/Rx)statistics,display/clear60 DNSaddress,query/set43
B
badframestatistics,display/clear60 band 2Gnetwork,return36 currentactiveband,return34 currentGSM,return38 currentWCDMA,return38 bands available29 current29 set29 basestation colorcode,2G,return36 identitycode,2G,return36 BCCHfrequencylevel,2G,return36 bearer,callprogressnotification49 bootandhold.Seebootloader. bootloader version,return30 waitforfirmwareupdate30 bootuptime,return38
E
Ec/Io display55 strongestcellvalues,return33 endpoint ATportmapping39 eraseprofileinformation44 ETFCIaveragevalues,enable/disable/query33
F
FIFOinterface,activate/deactivatePDPcontext42 firmware revision,minimumrequired10 update,waitinbootloadermode30 upgrading11 version,return39 frequencybands.Seebands.
G
glossary10 GMMstate,return38
C
callidentificationnumber,callprogressnotification49 callprogressnotification,enable/disable49 callstate,callprogressnotification49 cellID,2G,return36 cellselectioncriteria,2G,return36
H
hardwareversion,return39
71
I
ICCID,display66 IPaddressdisplay,profileID43 ITUTV.250commands,list17
L
LAC,2G,return36 loudspeakervolumequery/set,internal31
M
MCC,2G,return36 MM state,return38 substate,return38 MNC,2G,return36 modeacquiredbymodem,return38 mode,query/set51 modem configuration,query/set51 hardwareversion,return39 mode,query/set51 mode,return38 networkacquisitionorder,query/set51 networks,supported31 operationalstatus,return38 reset35,41 reset,waitforfirmwareupdate30 roamingsupport,query/set51 servicedomainsupport,query/set51 SIMstatus,query/set51 statuscommands,list27 MSCrevision,current41 multipartystatus,callprogressnotification49 mutingvoicecall,enable/disable31 MUX,secondarySIOport,configureforCS32
powerdownsystem40 primaryscramblingcode,display54,55 profileID applicationautolaunch,query/set44 default,query/set42 DNSaddress,query/set43 eraseinformation44 IPaddress,display43 passwordprompt,query/set44 SeealsoPDPcontext. SWIspecificinformation,query/set44 protocol,current41 PSstate,return38 PSC,display54
R
radioaccesstechnology.SeeRAT. RAT current,displaydescription34 current,query/set45 receivedsignalcodepower display55 return41 reset modem35,41 modem,waitforfirmwareupdate30 roamingsupport,query/set51 routingareacode,2G,return36 RSCP,return41 Rx,minimumleveltoregister,2G,return36
S
SABM(Tx/Rx)statistics,display/clear60 scramblingcodes,display55 SDcard installationstatus45 searchwindowsize,display55 secondaryscramblingcode,display55 serialI/O.SeeSIO. service availability,display52 domain,display52 domain,query/set45 servicedomainsupport,query/set51 sessioncounters,display/clear60 SGSNrevision,current41 SIM authentication65 cardtype,return30 ICCID,display66 installationstatus46 status,display52 status,query/set51 SIO,secondaryport,configureforCSoverATorMUX 32 SMS
N
N1/N2counts,display/clear60 network acquisitionorder,query/set51 availableforuse31 colorcode,2G,return36 currentlyinuse31 information,2G,return36 supportedbymodem31
P
password profileIDprompt,query/set44 PDPcontext activate/deactivateforFIFOinterface42 SeealsoprofileID
72
2130617
Index
USBdescriptorinformation,display54
V
version bootloader,return30 firmware,return39 modemhardware,return39 voice callmuting,enable/disable31 voltage actual,return40 rawreading,return40 state,return40 volume internalloudspeaker,query/set31
T
T1/T2/T3expirystatistics,display/clear60 TAC,return35 temperature current,return39 return38 state,return39 terminology10 timeofday,query/set53 typeallocationcode,return35
U
UA(Tx/Rx)statistics,display/clear60 UIH(Tx/Rx)statistics,display/clear60
W
WCDMA RRCrevision,current41 setinformation,display55
73
74
2130617