Professional Documents
Culture Documents
Consultant
Worcestershire Council
Client
EMS
Sector
Education
Front Entrance
Products
MasterFlue System
Equipment
Hamworthy PV110c
Airtherm Masterflue Twin Wall Flue System
Application
Condensing
Airtherm Engineering Limited has recently completed a flue installation, working closely with the contractor, providing technical data and drawings at Swan Lane First School, Evesham, Worcestershire.
The flue system selected is a stainless steel fully welded twin wall 4 hour fire rated system with 30mm insulation. Airtherm provided a cost-efficient solution for the client, and furthermore we exceeded their expectations when our tender was some margin under the original budget offered by the Hamworthy flue division. The flue system installed comprised of a 2.5m horizontal run and a 3m vertical, incorporating the necessary drains to allow any unwanted condense to evacuate the system.
Vertical Stack
Product Solution
Airtherm Masterflue
Hanmworthy Modumax Variheat PV110c Chimney / Flue system Wet Negative / positive pressure
Working pressure: 200 Pa (product will operate 1000pa max) Inner wall: Outer wall: Insulation: Sealant : Fuel type: 316L1.4404/1.457 thickness 250 0,4 mm AISI 304/ 1.4301 thickness 0,5 / 0,6 mm 30mm thick Rockwool insulation tri-lip 'o' type silicone ring Gas
MasterFlue
Contact Details:
Airtherm Engineering Ltd Ventilation House Pedmore Stoubridge West Midlands DY9 0DS Tel: 0844 8092509 Fax: 01562 887312