Professional Documents
Culture Documents
PMCE_B_WF_007_AE
GETTING STARTED
Step 1: Power on the Thomson TG585 v 7 ADSL2+ Router.
Step 2: Connect your computer or laptop to the Thomson TG585 v 7 ADSL2+
Router using network cable (RJ 45 cable).
Step 5: A small window will pop-up Welcome to the Thomson Gateway Easy
Setup Click on Next.
Step 6: Select Routed PPP, and then click Next.
Step 7: Configure Routed
Internet Connection.
VPI/VCI = 8.35
Connection Type = PPP over
Ethernet (PPPoE)
Click on Next
Step 8: Enter the Qtel ADSL
user name and password
(unique for each user).
User Name = xxxxxxxx
Password = **************
Click on Next
Qtels ADSL customers are
kindly requested to call 111
to obtain their user name and password.
Step 10: Please wait until the device is configured Configuring your Thomson
Gateway Please wait .
Wait until the window shows Completing the Thomson Gateway easy Setup
Click on Finish to close the set-up.
Step 11: To verify the configurations, connect the Thomson TG585 v 7 ADSL2+
Router to DSL line. There are 5 LED on front side of the CPE which denote the
following:
Step 12: On the computer open Internet Explorer browser, in the address bar
type http://192.168.1.254, page display. Verify under Broadband Connection
Connected as shown below:
:
.Interface Enable
SSID
).(Network Name) (SSID
WEP
.Use WEP Encryption
.Apply
: .WPA
.Configure
SSIDWEP
:SSID .
:Security WEP .
:
http://192.168.1.254 .
Home Wireless
:
http://192.168.1.254 .
connected Broadband Connection .
: ( ).
= Administrator
= connect2th
Next
:
Configuring your Thompson Gateway
.Please wait
Completing the Thompson Gateway easy Setup
.
. Finish
:
ADSL2+ TG585 v 7 .DSL
CPE :
ADSL
.
4
VPI/VCI = 8.35
Next
:
.Qtel ADSL
( )
= xxxxx
= xxxxx
Next
Qtel ADSL WiFi Router
.ADSL2+ TG585 v 7
.
.111
ADSL.
.ADSL2+ TG585 v 7
:
ADSL2+ TG585 v 7 (.)RJ 45
:
http://192.168.1.254 .
( ) . =
Administrator = .connect2th