You are on page 1of 1

BSNL GPRS configuration for the PC/Laptop Tufanonlines Weblog

Page 1

Tufanonlines Weblog
Techie and informative blogs by Tufan Maity

BSNL GPRS configuration for the PC/Laptop


I am using a Motorola MotoRokr E6 with a West Bengal BSNL connection with GPRS activated. I would prefer a USB data cable to connect the phone to the PC and then use the phone as a USB modem. # Basic Requirements: 1. A Web Enabled Phone that can be connected to the PC using a data cable, bluetooth or infrared 2. A GPRS activated mobile connection # Procedure: 1.GPRS activation In BSNL the balance should be more than Rs. 50 for the GPRS to remain activated. To activate GPRS an sms has to be sent: GPRS E to 53733 [removing the quotes] The usual cost is 2 paise/ Kb. But BSNL has an offer which provides 30 days unlimited net for Rs 189 [by easy recharge from an BSNL outlet] and probably Rs 51 for 7 days unlimited net. 2.Connecting the phone to the PC The phone can be connected to the PC using the USB data cable, bluetooth or infrared with the help of the driver tools provided with the phone. Hence the phone will be ready to be used as a USB modem connected to the PC. 3.Settings for the Modem on the PC Start > Settings > Control Panel > Phone and Modem Options > Choose your modem > Click Properties > Choose tab Advanced > At Extra initialization commands, enter code: AT+CGDCONT=1,IP,www.e.pr > OK 4.Setting up an internet connection Though an internet connection can be setup for Motorola MotoRokr E6 using the PhoneTools software provided with the phone, in any usual phone a new connection has to be setup using the DialUP Networking function of Windows using the following process: Start > Control Panel > Network Connections > New Connection Wizard > Next > Connect to the Internet > Next > Set up my connection manually > Next > Connect using a dial up modem > Next > Choose your modem > Next > Type bsnl-gprs > Next > Type *99# or *99***1# or *99***2# or *99***3# > Next > The Username box can be left blank > The Password box can be left blank > The Confirm box should left blank too > Next > Finish While using the setup process through the mobile PhoneTools the following data may be used: Username : <blank> Password : <blank> Access Point Name[APN] : www.e.pr 5.Browser Configuration

http://tufanonline.wordpress.com/2008/10/12/bsnl-gprs-pc/

12/12/2012 08:03:41 AM

You might also like