Professional Documents
Culture Documents
S. NO.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Student Satellite Project Design and Analysis of a 1 MW Wind Turbine Rotor Software based onboard data handling simulator for functional verification CFD analysis of supersonic flow over slender cylindrical bodies Damage characterization of composite materials under impact loading Design and development of Bit Synchronizer Design and development of pitch & yaw control of air/water pressure nozzle in closed loop S-Band Frequency Synthesizer Implementation of AES Encryptor/Decryptor on FPGA Remote transfer of large images Drought, Floods/ Environment related Studies Pitch Control of Movable Nozzle Model Smart-phone based GPS positioning Modeling and autonomous control of wheeled robot with obstacle avoidance Precise position and speed control of Dc servo motor for variable load SPI TO SPORT CONVERTER
Page 1 of 58
PROJECT TITLE
AVL
Page 2 of 58
46.
Page 3 of 58
Page 4 of 58
Communication Links
Page 6 of 58
1.
LIST OF EXEMPLARY EXPERIMENTS/ PROJECTS I. Satellite tracking experiment II. Digital radio communications III. Digital Store & Forward communications IV. Technology demonstration V. Signal Intelligence VI. Remote Sensing VII. Etc.
1. a.
SUPARCO AVAILABLE FACILITIES FOR SATELLITE DESIGN & DEVELOPMENT Thermal Vacuum Chamber I. Simulate space environment (Vacuum). o o II. Temperature range from 70 C to 100 C. Satellite Assembly, Integration & Testing Facilities I. Clean room required for integrating sensitive equipment. II. Testing of complete satellite (system level testing). III. Can accommodate satellites of various sizes. Satellite Research & Development Centers I. Development of various hardware and software for satellite subsystems. II. Development of various testing platform for satellite. Anechoic Chamber I. Antenna Testing Facility. Helmholtz Coil Facility I. Magnetic devices testing and calibration. II. Simulation of desired magnetic filed in all axes.
b.
2. a.
SUPARCO INVOLVEMENT Program Management I. Student Project Manager and Chief Engineer II. Student Subsystem Teams III. Engineering support for some critical tasks. IV. Providing critical feed-back Faculty and Staff Engineering Mentorship (Know How Transfer) I. Faculty Principal Investigator II. Engineering Project Manager from Space III. Mentor Engineers for Subsystems (e.g. instruments, structures, etc.) IV. Faculty Technology Advisor
c.
d. e.
b.
c.
Page 7 of 58
OBJECTIVES
PROJECT OUTLINE
Literature Review To generate blade and hub profile Grid independence study Validation of CFD results Investigation of flow around blades Calculation of loads on blade and comparison with BEM method Blade and hub profile optimization MAJOR EQUIPMENT & Standard CFD Software SOFTWARE REQUIRED DELIVERABLES Methodology for the design of blade and hub profile Solid model, grid, and solution files of design profile Report ESTIMATED One Year DURATION SPONSORING WING Space Technology (ST)
Page 8 of 58
OBJECTIVES
To develop a software based simulator system for onboard data handling of a small remote sensing spacecraft (including pass simulation) PROJECT OUTLINE This simulator will use any standard remoting technique (like .NET remoting or AS3 remoting) to access remote object (simulating connectors) working on other systems connected using LAN. This simulator should comply 4th Step of Simulation Steps i.e. Software in Loop MAJOR EQUIPMENT & Matlab/ C++ SOFTWARE REQUIRED DELIVERABLES A GUI based software in which if one value changes(push button for instance) on output pin of a connector the value is updated on the input (LED for instance) of corresponding connector ESTIMATED One Year DURATION SPONSORING WING Space Electronics
Page 9 of 58
OBJECTIVES
PROJECT OUTLINE
Literature Review CFD analysis of slender nose-cone-cylindrical projectiles Grid independence study Validation of CFD results with available experimental data MAJOR EQUIPMENT & Standard CFD Software SOFTWARE REQUIRED DELIVERABLES Solid model, grid, and solution files of all configurations Report ESTIMATED DURATION SPONSORING WING One Year
Page 10 of 58
OBJECTIVES
PROJECT OUTLINE
Literature review Finite Element Analysis of impact loading using ANSYS LSDYNA (Details of projectile will be provided) Validation of FEA results through experimental testing (optional) Report writing & presentation Functionality will be damage characterization of wind turbine blade, composite helmets, composite CNG cylinder etc MAJOR EQUIPMENT & FEA Tool SOFTWARE Different composite coupons REQUIRED Impact testing rig for experimental testing (optional) DELIVERABLES Characterization of damage area w.r.t. projectile size & velocity Area of plastic damage on composite materials based on their type Stress field due to damage & its role in subsequent life of structure ESTIMATED One Year DURATION SPONSORING WING Space Technology (ST)
Page 11 of 58
OBJECTIVES
To design and develop a bit synchronizer which can input Manchester encoded serial data and output data in NRZ-L form with a synchronized clock PROJECT OUTLINE Input data bit rate: 32K,64K,128K,192K,256K,512K,1M(selectable) Input data level: 0-2 Vp-p Input data code: Manchester encoded data Output data format: NRZ-L Output data level: 0-5 V (TTL) Output clock level: 0-5 V (TTL) Output clock phase: 0 and 90 (Selectable) MAJOR EQUIPMENT & Logic state analyzer SOFTWARE REQUIRED DELIVERABLES A plug and play hardware system to fulfill the requirements mentioned in specification table ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 12 of 58
OBJECTIVES
PROJECT OUTLINE
+/- 45 degrees angle of freedom in pitch and yaw, pot/encoder mounted on each pitch yaw axes for feed back Nozzle sizes can be chosen to ease manufacture and procurement Linkage sizes etc can be varied to fulfill conceptual and functional requirements Simultaneous pitch/yaw operation (desired but not necessary) MAJOR EQUIPMENT & Matlab/ Simulink/ Controls Toolbox SOFTWARE REQUIRED DELIVERABLES Functional model of pitch yaw control in closed loop ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 13 of 58
OBJECTIVES
PROJECT OUTLINE
Study of Basic Microwaves, Control Theory. Study of Phase Locked Loop theory. Study of different types of filters especially active filters. Design and simulation Development of hardware MAJOR EQUIPMENT & Network analyzer SOFTWARE REQUIRED DELIVERABLES Production of Local Oscillator on hardware with SMA connector at the o/p port , Comprehensive Report ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 14 of 58
OBJECTIVES
PROJECT OUTLINE
Study of Information Security and Cryptography Study of FIPS PUB 197 standard Selection of AES parameters HDL Coding & Testing on FPGA Platform Analysis of memory management, decoding delay MAJOR EQUIPMENT & Standard FPGA Kit SOFTWARE REQUIRED DELIVERABLES Timing Simulation, FPGA implementation and Report ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 15 of 58
OBJECTIVES
Secured and efficient transfer of large size imagery to a hand held devices
PROJECT OUTLINE
Study of large imagery handling in a limited memory environment Remote streaming of large size imagery Develop a data security mechanism over the air Efficient handling of imagery using handheld devices Develop multi tier application for remote access MAJOR EQUIPMENT & Appropriate standard software SOFTWARE REQUIRED DELIVERABLES Multi tier application along with algorithm, Comprehensive Report ESTIMATED DURATION SPONSORING WING
One Year
Page 16 of 58
OBJECTIVES
PROJECT OUTLINE
Basic Studies about the Environment Study of impact of Hazards Like Floods on Environment Use of Satellite Remote Sensing(SRS) in Environmental Monitoring Report on the existing conditions/ Recommendations MAJOR EQUIPMENT & Appropriate related imageries SOFTWARE REQUIRED DELIVERABLES Comprehensive report on the current state of the environment ESTIMATED DURATION SPONSORING WING
One Year
SPAS/SAR Wing
Page 17 of 58
OBJECTIVES
PROJECT OUTLINE
A picture speaks thousand words. The picture above describes the project outline MAJOR EQUIPMENT & SOFTWARE REQUIRED DELIVERABLES Nozzle, Electromechanical Actuator, Torsion Spring, Gas Cylinder, Piping, Fitting Components, Controller, PRO/E , AutoCAD Mechanical Hardware and Design Report
One Year
R&IW
Page 18 of 58
OBJECTIVES
The aim of the project is to develop android based application which can transmit real-time position information from smart phone to personal computer (PC) PROJECT OUTLINE In this project, android based application will be develop which will extract real-time position from the GPS-chip embedded in the smartphone and transmit this extracted position to the PC for real time visualization MAJOR EQUIPMENT & Smart-phone SOFTWARE Android application development suite REQUIRED Internet connectivity DELIVERABLES Android based smart-phone capable of transmitting real-time position information to the PC ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 19 of 58
OBJECTIVES
PROJECT OUTLINE
One Year
R&IW
Page 20 of 58
OBJECTIVES
Development of control algorithm for speed and position control The designed system is capable to achieve desired position and rate with various loading conditions PROJECT OUTLINE In this project the team members will develop the precise control algorithm for DC motors under the presence of load (platform) to accurately achieved the required position or rotating with various rates given by the user, through an interface MAJOR EQUIPMENT & DC Servo Motors SOFTWARE DC drives REQUIRED Development of an interface to command desired position or rate C-Language DELIVERABLES Demonstration of precise position and speed control of DC motors Project report Electronic circuit design and software ESTIMATED One Year DURATION SPONSORING WING R&IW
Page 21 of 58
OBJECTIVES
Develop a module that can facilitate interface between SPI device and SPORT device
PROJECT OUTLINE
Since there is no standard protocol or device that can facilitate interface between two devices working on SPI protocol and SPORT protocol respectively. So the main purpose of this project is to build a module based on microcontroller or some integrated circuits that allows the two devices working on different protocol to communicate with each other in an efficient manner MAJOR EQUIPMENT & SPI Device SOFTWARE Microcontroller REQUIRED SPORT Device DELIVERABLES Properly Working Converter module Report ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 22 of 58
OBJECTIVES
Development of image and video data acquisition and processing software The system is capable to lock moving object with still as well as moving camera PROJECT OUTLINE In this project the team members will develop the image and video acquisition and processing algorithm implemented on DSP to identify and lock the moving object with still as well as with moving camera MAJOR EQUIPMENT & DSP board SOFTWARE Camera REQUIRED Data acquisition interface DELIVERABLES Demonstration of detection of moving object Project report Image acquisition and processing algorithm ESTIMATED One Year DURATION SPONSORING WING R&IW
Page 23 of 58
OBJECTIVES
PROJECT OUTLINE
In this project the team members will develop wireless communication channel to transfer image and video stream to PC from a DSP over the range of around 200m. A GUI will be developed for the display of image and video on PC MAJOR EQUIPMENT & DSP board SOFTWARE Camera REQUIRED Wireless transmitter & receiver Desktop PC DELIVERABLES Demonstration of Video and image transmission over wireless link Project report Software ESTIMATED One Year DURATION SPONSORING WING R&IW
Page 24 of 58
OBJECTIVES
Development of Android based application for home automation system for security and surveillance. The system is capable to cover a range of 100m PROJECT OUTLINE In this project the team members will develop Android based application for performing several applications from mobile set. The applications includes image acquisition from camera, capable to ON and OFF certain switches etc MAJOR EQUIPMENT & Mobile set SOFTWARE Camera REQUIRED Wireless transmitter and receiver DELIVERABLES Demonstration of designed application either using blue tooth or through internet to perform several applications for home automation Project report Software ESTIMATED One Year DURATION SPONSORING WING R&IW
Page 25 of 58
OBJECTIVES
Fabrication and testing of RC PWM drive capable of driving a four wheel differential drive vehicle PROJECT OUTLINE Design of drive electronic and thermal design Capability to operate the differential drive vehicles via commercially available RC transmitter receiver Capable of driving PMDC up to 60 Volts and 30 Amp per motor Thermal design Drive hardware box Testing on real system MAJOR EQUIPMENT & Oscilloscope, Multimeter, Function Generator, Power supply, SOFTWARE Soldering Station, Bread board Proteus etc REQUIRED DELIVERABLES Report on the design Electronic hardware/box ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 26 of 58
OBJECTIVES
PROJECT OUTLINE
Transmitter capability of accepting A/V input from camera/microphone Receiver output in PAL/NTSC (colour) Working range required to be 300 m line-of-sight Testing of designed system on software and available hardware MAJOR EQUIPMENT & Oscilloscope, Multi meter, Function Generator, Power supply, SOFTWARE Soldering Station, Bread board Proteus etc REQUIRED DELIVERABLES Design report ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 27 of 58
OBJECTIVES
PROJECT OUTLINE
Introduction to VDSP++ and ADSP (21065L) How to create a new project What are bios functions Comparison to C language (loops/conditions/data types etc) Memory architecture SPORT architecture IO flags architecture UART architecture etc. Practical Programming of DSP MAJOR EQUIPMENT & DSP Development Board ADSP-21065L, Visual DSP++ 5.0, A PC with SOFTWARE serial port. , Power Supply and Required Cables REQUIRED DELIVERABLES Report ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 28 of 58
OBJECTIVES
Design and development of a data acquisition system by using DSP (21065L) and 16 bit ADC (AD73360)
PROJECT OUTLINE
Study of DSP and ADC Hardware Design Hardware and software Development Testing MAJOR EQUIPMENT & Matlab, Labview SOFTWARE REQUIRED DELIVERABLES DAQ System circuit and software ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 29 of 58
OBJECTIVES
Development of calibration scheme for INS having DTGs and Pendulous accelerometers in orthogonal configuration with reference surfaces PROJECT OUTLINE Error Model of Inertial sensors Rate Calibration Position Calibration Computation Software Development MAJOR EQUIPMENT & Matlab, Labview SOFTWARE REQUIRED DELIVERABLES Calibration Scheme Software ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 30 of 58
OBJECTIVES
PROJECT OUTLINE
Programming of u-controller Software development for PC interfacing Development of hardware for data acquisition Data Processing & representation Field Testing MAJOR EQUIPMENT & Matlab, Labview, C SOFTWARE REQUIRED DELIVERABLES Hardware + Software ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 31 of 58
OBJECTIVES
PROJECT OUTLINE
Project involves design of DC motor torque and speed measurement rig Design will be based on testing of low profile DC motors Motors will be tested around an angle of 40 Degrees Torque and speed sensors should be utilized for measurement feedback Torque testing range is around 150 Nm Completion time will depend on number of students working and time available to them (tentative is about 4-6 months) MAJOR EQUIPMENT & Matlab SOFTWARE REQUIRED DELIVERABLES Functional model ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 32 of 58
OBJECTIVES
PROJECT OUTLINE
Study of 6 Degree of freedom motion Study of Flight simulator Study of different programming environment Software development MAJOR EQUIPMENT & Matlab, Labview SOFTWARE REQUIRED DELIVERABLES Design report and software ESTIMATED DURATION SPONSORING WING
One Year
R&IW
Page 33 of 58
OBJECTIVES
Develop an inertial navigation system algorithm in embedded system using inertial sensor data
PROJECT OUTLINE
Study of inertial sensors Study of navigation principles Study of embedded systems MAJOR EQUIPMENT & Matlab SOFTWARE REQUIRED DELIVERABLES Navigation algorithm Embedded system code for navigation algorithm ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 34 of 58
OBJECTIVES
To acquire data with time from different sensors from remote location and transmit them through serial link and plot them on GUI in real time PROJECT OUTLINE Number of sensors: Minimum 20 Sampling rate: 100 Hz Resolution: 12-bit Distance b/w sensor and monitoring station: 500 meter on wire and 100 meter on RF MAJOR EQUIPMENT & Appropriate software SOFTWARE REQUIRED DELIVERABLES A GUI based system with real time data acquisition from different sensors in some remote locations ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 35 of 58
OBJECTIVES
PROJECT OUTLINE
A mechanical system may be designed to realize the balance platform and mechanism to control it Operating conditions like pressure, temperature, and humidity must be defined Define operating ranges like maximum tilt angle, accuracy, resolution, precision, refresh rate, settling time User friendly interface and control (GUI) Load limits (Maximum mass and its mounting precautions like CG, center of mass, dimensions of payload to be fixed/ mounted on platform) Operating voltage is 24~36 Volt DC MAJOR EQUIPMENT & Appropriate software SOFTWARE REQUIRED DELIVERABLES A stabilized platform capable of stabilizing itself for with in defined range of tilt angle ESTIMATED DURATION SPONSORING WING One Year
R&IW
Page 36 of 58
OBJECTIVES
PROJECT OUTLINE
Study of Image Compression Techniques and MATLAB Image Compression Toolbox Perform lossless image compression on image (Gray Scale/ Single Channel) and save the file into .jp2 standard. In the next step the software would take .jp2 file as input and perform image decompression and display in the GUI MAJOR EQUIPMENT & Appropriate software, C++ SOFTWARE REQUIRED DELIVERABLES GUI based comprehensive design software with proper display, image size, compression ratio, PSNR of image after compression/decompression, number of tiles, number of code blocks, type of filter used ESTIMATED One Year DURATION SPONSORING WING Space Electronics
Page 37 of 58
OBJECTIVES
PROJECT OUTLINE
Study of CPLD Familiarization with High speed PCB Design Software like Orcad, DXP Protel Programming of CPLD Design of PCB for Clock signal Generation MAJOR EQUIPMENT & Orcad, DXP Protel SOFTWARE REQUIRED DELIVERABLES The board should be capable of generating 10 different signals at 10 MHz output ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 38 of 58
OBJECTIVES
PROJECT OUTLINE
Study of Linear CCD Sensor Study of Servo Motors Development of Control Circuitry for Servo Motor Design and Development of the Platform for Imaging Sensor MAJOR EQUIPMENT & Labview SOFTWARE REQUIRED DELIVERABLES The platform should be capable to move smoothly at a speed of 2 mm/s to 20 mm/s and scan an area of 600mm. Bi-directional control is required ESTIMATED One Year DURATION SPONSORING WING Space Electronics
Page 39 of 58
OBJECTIVES
To design and develop a high speed ADC module for image acquisition
PROJECT OUTLINE
Study of Linear CCD Sensor Study of High speed A/D techniques Familiarization with Orcad or Protel DXP Design of PCB for ADC MAJOR EQUIPMENT & Orcad, Protel DXP SOFTWARE REQUIRED DELIVERABLES The ADC should be able to convert analog output of sensor module to digital data @ 10 M Sample/s ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 40 of 58
OBJECTIVES
Design of a Schmidt Cassegrain telescope by selecting and applying most efficient ray tracing technique and validation of the design using OSLO PROJECT OUTLINE Study of various telescope designs and their application, mainly focusing on space telescopes Selection of efficient ray tracing technique and design of optical layout accordingly Familiarization with Optical design Software OSLO Design of Optical telescope on software MAJOR EQUIPMENT & OSLO SOFTWARE REQUIRED DELIVERABLES Optical layout of telescope (OSLO or ZEMAX file) ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 41 of 58
OBJECTIVES
Design of a Ritchey Cretin telescope by selecting and applying most efficient ray tracing technique using OSLO. (Specifications will be provided) PROJECT OUTLINE Study of various telescope designs and their application, mainly focusing on space telescopes. Selection of efficient ray tracing technique and design of optical layout accordingly. Familiarization with Optical design Software ZEMAX/ OSLO Design of Optical telescope on software MAJOR EQUIPMENT & ZEMAX, OSLO SOFTWARE REQUIRED DELIVERABLES Optical layout of telescope (OSLO or ZEMAX file) ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 42 of 58
OBJECTIVES
PROJECT OUTLINE
Study of Satellite Power System Design of power management scheme Simulation of management in Matlab Development of code Development of Hardware Testing of developed system MAJOR EQUIPMENT & Matlab SOFTWARE REQUIRED DELIVERABLES Simulations, coding and Hardware ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 43 of 58
OBJECTIVES
PROJECT OUTLINE
Study of switching regulators. Simulation of switching supply Development of Hardware and Software Testing of developed system MAJOR EQUIPMENT & Matlab, Labview SOFTWARE REQUIRED DELIVERABLES Simulations , coding and Hardware ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 44 of 58
Page 45 of 58
OBJECTIVES
The task incorporates the implementation of the mentioned algorithm (already developed) on a DSP/FPGA platform and optimizing its performance according to the platform PROJECT OUTLINE The students will be provided with the already developed MATLAB code and preliminary instructions on the hardware design. They will use suitable DSP/ FPGA commercial-off-the-shelf (COTS) based technologies for system implementation MAJOR EQUIPMENT & Matlab SOFTWARE REQUIRED DELIVERABLES Properly formatted code generation and optimization of the code for platform specific requirements ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 46 of 58
Space Electronics
Page 47 of 58
OBJECTIVES
PROJECT OUTLINE
EMI EMC Analysis using Hyper lynx Software Pre-Layout Analysis DDR2 to FPGA Route estimation with optimized S-Parameters PCIE to FPGA Route estimation with optimized S-Parameters and route length High Speed I/O connector to FPGA Route estimation with optimized S-Parameter and route Length Identification of Stackup Layers and arrangement of power layers MAJOR EQUIPMENT & Matlab, Labview SOFTWARE REQUIRED DELIVERABLES A report of S-parameters and SI analysis of FPGA Based board ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 48 of 58
OBJECTIVES
To design and develop JTAG Test Access Point (TAP) Control System that detects the devices attached to the JTAG chain and reads the device identification through a Microcontroller PROJECT OUTLINE Study IEEE1149.1 JTAG Protocol Study of JTAG Tool Chaining for Multiple device access Implementation of Design in Microcontroller Interfacing the Microcontroller to the target board through JTAG Interfacing the Microcontroller to PC through serial port for display of device ID and status MAJOR EQUIPMENT & Labview SOFTWARE REQUIRED DELIVERABLES Source Code, Design Files, Hardware Demonstration, Implementation and Design Documents ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 49 of 58
OBJECTIVES
PROJECT OUTLINE
To extract data from data fields of incoming packets Packets will be consist of pre-define format Pre-define format include sizes of headers and its sub-fields, data field length and their complete specification will be provided by SUPARCO Packets will be consist of either valid data or idle data identified through its header field Data from valid packets will be extracted and discarded if idle packet Generate and save text Files of extracted information Keep Record of number of packets arrived, lost packets, missing data, number of valid and idle packets GUI Development Text file contains raw data of specified packet format will be given by SUPARCO. Also, detailed specification of Packet format will be provided MAJOR EQUIPMENT & Matlab , Visual C or other SOFTWARE REQUIRED DELIVERABLES GUI Software developed on above mentioned software Complete Source Code Project Report ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 50 of 58
Space Electronics
Page 51 of 58
One Year
Space Electronics
Page 52 of 58
OBJECTIVES
PROJECT OUTLINE
Study different Reliability techniques used in embedded systems particularly those related to Space applications Study of Space Environment and Reliability Hazards like (outgasing, Radiation effects, SEU, SEL) Proposed Design for Space application using TMR scheme MAJOR EQUIPMENT & Appropriate Software SOFTWARE REQUIRED DELIVERABLES Implementable TMR scheme including any source code(s), design files and simulation files ESTIMATED DURATION SPONSORING WING One Year
Space Electronics
Page 53 of 58
OBJECTIVES
PROJECT OUTLINE
Study different Error Detection and Error Controlling techniques Study of Errors occur in memory read/write transactions Proposed Design for Robust EDAC controller for DDR memory MAJOR EQUIPMENT & Matlab SOFTWARE REQUIRED DELIVERABLES Study Report ESTIMATED DURATION SPONSORING WING
One Year
Space Electronics
Page 54 of 58
Space Electronics
Page 55 of 58
OBJECTIVES
To study the stability criteria for Tubular Towers of Wind Turbine under wind loading
PROJECT OUTLINE
Literature review Optimization of basic material properties Structural configuration (base diameter, top diameter, taper ratio, thickness of material etc.) of tubular tower and their dependence on height of the tower Finite Element Analysis (Static, dynamic and buckling) of different configurations Report writing & presentation MAJOR EQUIPMENT & Ansys SOFTWARE REQUIRED DELIVERABLES Optimized material properties Parametric study of structural configuration Report writing & presentation ESTIMATED One Year DURATION SPONSORING WING Space Technology
Page 56 of 58
OBJECTIVES
PROJECT OUTLINE
Literature review Rolling of sheets Flanges Welding Assembling MAJOR EQUIPMENT & Ansys SOFTWARE REQUIRED DELIVERABLES Tapered rolling procedures Welding procedure and characterization of weld properties Design of welding jigs to control weld distortions Flanges and their joints with tower Procedure for assembling of tubular tower ESTIMATED One Year DURATION SPONSORING WING Space Technology
Page 57 of 58
OBJECTIVES
PROJECT OUTLINE
Literature Review CFD analysis of straight and curved fin projectile Grid independence study Validation of CFD results with available experimental data Detail study of anomalies in curved fin projectile MAJOR EQUIPMENT & Standard CFD software SOFTWARE REQUIRED DELIVERABLES Solid model, grid, and solution files of all configurations Report ESTIMATED DURATION SPONSORING WING One Year
Space Technology
Page 58 of 58