You are on page 1of 2

MECH Attachment 1 Equipment list

1. Hardware Requirements
This chapter list all necessary equipment that is required when repairing Sony Ericsson Consumer Products. Sony Ericsson product unique tools are not included; these will be handled separately within each product project. The equipment listed below shall be seen as a general basic requirement.

Sony Ericsson Provided Repair Equipment

Description Torque Screwdriver Programming Interface, 3V Cable, RS-232 Smart Card USB Smart Card Reader Hardlock Handscanner

Part Number NTZ 112 334 RPM 113 317/3 LZY 213 595 LZY 213 1191 KRY 105 165 NTZ 112 340

Comments Adjustable between 10 and 70 Ncm For the system connector PC-Prog. Interface

Barcode reader

Equipment provided by other Location

Description Battery Battery Charger Vehicle Handsfree Tweezers Pointed/Blunted Flatnose Pliers Side Cutting Pliers Dentist Hook Brush Screwdriver, Small Isopropyl Alcohol Cotton Gloves ESD Tables Or Table Carpets ESD Wrist Bands With Cable

Comments

ESD-safe ------

-1-

MECH Attachment 1 Equipment list

Description ESD Bags ESD Tester ESD Storage Boxes Computer Printer IR-Device

Comments For transport and handling For wrist bands and tables/carpets IBM compatible Pentium with an USB-port

-2-

You might also like