Professional Documents
Culture Documents
Course Introduction
Course Introduction
Course Introduction
Background
Topics (Lectures)
Introduction to Highways and Traffic Engineering (6 hours). Traffic Management System and Capacity Analysis (8 hours) Geometric Design of Highways and Streets (6 hours) Pavement Structural Design (6 hours) Highway Maintenance (2 hours)
3
CO1
Use recommended standard and specification when engaged in actual planning, design and field works.
CO2
Integrate the theoretical knowledge to the practical aspect of traffic and highway engineering works.
CO3
Obtain the basic information and apply them for highway physical location, geometric and structural pavement design as well as the materials used in the construction.
CO4
Acquire the necessary skill in performing standard highway laboratory test and data analysis.
Assessment
Continuous Assessment i - 1 mini project dealing with actual case studies (group works with presentation) - Laboratory report (group assessment) ii. Test 1 (Topic 1-3) iii. Test 2 (Topic 4-5) Continuous Assessment Final Examination Total = 10% = 10% = 10% = 10% = 40% = 60% = 100%
9
References
Garber and Hoel (2002). Traffic and Highway Engineering. 3rd Edition JKR Arahan Teknik Jalan - A Guideline on Geometric Design of Roads (REAM)GL2/2002) - Manual on Pavement Design 5/85
Rose,R.P, McShane, W.R and Prassas, E.S (1998). Traffic Engineering Highway Capacity Manual 2000 - Transportation Research Board, USA
10