Professional Documents
Culture Documents
Metal Bar Grating
Metal Bar Grating
Metal Bar Grating
Phoenix, AZ
Los Alamitos, CA
Tracy, CA
Woodburn, OR
Seattle, WA
Grating Pacific
TO THE READER:
The following presentation of bar grating products has been compiled to serve
the diverse needs of design professionals as well as the specific needs of the end
user. By describing the extensive line of bar gratings offered by Grating Pacific, this
catalog serves as a useful tool for defining materials, methods of assembly,
fabrication and alternative finishes. This allows the user to select the appropriate
materials for each application. Whether your needs include only a simple stair and
platform or an entire industrial processing facility, the products described in this
catalog offer a comprehensive menu of open metal flooring features from which the
most appropriate may be selected.
The introductory presentation on pages three and four provide a foundation for
your evaluation of the specific products found on the pages which follow. We begin
with terms and nomenclature common to grating products to establish a familiar
language. Then we introduce the basic elements that should be considered when
selecting proper materials for your applications. By combining these elements with
specific product and load data which follow, the introduction enables the specifying
authority to select products that will provide years of continuing, safe, efficient
service.
BEYOND FLOORING:
While traditional specifications for bar grating originated with flooring applications, the flexible nature of these products combined with the creativity of architects and engineers has led to innumerable alternative applications for bar grating.
Non-flooring applications for bar grating include architectural as well as security
grilles and screens, drainage trench and pit covers, machinery safety guards, racks
and shelving, scaffolding, fences, trash and wash racks as well as OEM components.
The opportunity to enhance the value of your next engineering project can be positively affected by considering the products on the pages that follow.
Index
INTRODUCTION ....................................................................................................3
SPECIFICATION CONSIDERATIONS ....................................................................4
WELDED STEEL GRATING ....................................................................................5
STEEL GRATING LOAD TABLE .............................................................................6
SWAGED ALUMINUM GRATING ........................................................................7
ALUMINUM GRATING LOAD TABLE ..................................................................8
PRESSURE LOCKED GRATING.............................................................................9
STAINLESS STEEL GRATING ..............................................................................11
STAINLESS STEEL GRATING LOAD TABLE .......................................................12
RIVETED GRATING.............................................................................................13
RIVETED GRATING LOAD TABLE......................................................................14
ALUMINUM PLANK GRATING..........................................................................15
STAIR TREADS ....................................................................................................16
HEAVY DUTY GRATING ....................................................................................17
BRIDGE DECKING...............................................................................................24
EMBED FRAMES .................................................................................................25
TRENCH GRATING SYSTEMS............................................................................27
INLET GRATES & FRAMES ................................................................................29
FASTENERS & BANDING ...................................................................................31
PANEL WIDTHS & LAYOUT...............................................................................32
MANUFACTURING & INSTALLATION...............................................................33
ADDITIONAL PRODUCTS ..................................................................................34
NAAMM The National Association of Architectural Metal Manufactures consists of five operating divisions,
each focused on specific metal products for building and related applications. Each Division develops and maintains technical standards for its products and actively promotes their use by design professionals.
The Metal Bar Grating Division of NAAMM publishes the only manuals for standard and heavy duty gratings
which are recognized and approved by ANSI, the American National Standards Institute. These NAAMM / ANSI
standards are your guide in assuring that your grating needs are satisfied by products of consistent quality and
availability.
Grating Pacific, an active NAAMM member in good standing, designs, manufactures and fabricates all of its bar
gratings in strict accordance with published NAAMM standards. Supporting engineering documentation is available
upon request.
www.gratingpacific.com
Introduction
O.C. BEARING
BAR SPACING
SPAN
METHODS OF ASSEMBLY
WELDED GRATING
RIVETED GRATING
Cross bars are inserted into prepunched holes in the bearing bars
and hydraulically swaged to lock
the bars in place. Most effective
for the manufacture of aluminum,
stainless steel, and close mesh
gratings.
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Specification Considerations
the sizes
WIDTH
shown in the
SPAN
load tables
and selection
guides to provide the
equivalent
strength of
non-serrated
bars.
BANDING
To enhance
architectural
appearance or to proUNSUPPORTED SPAN
vide additional transverse
stiffness, the open ends of the
grating panels can be banded. This is
achieved by welding a flatbar, similar
in size to the bearing bars, to the cut
ends of the grating panel. Banding
can reduce impact stresses by transferring loads to adjacent bars that are not
directly subjected to service loads.
Trim banding should always
be considered when the
grating panels are
designed to be removable on even an infreOPTIONAL
quent basis. Additionally,
SERRATED
SURFACE
banding should always be
specified when the ends of the
bearing bars are unsupported or the
grating is designed to service vehicular
loads. Further banding descriptions
and welding standards can
be found on page 31 of
this catalog.
FINISHES Steel grating
products are usually
OPTIONAL
shipped with one of three
END BANDING
standard finishes, bare steel,
painted with one coat of the
manufacturers red or black paint,
cleaning, abrasive blasting or electroor hot dip galvanized after fabrication
polishing. All of our grating products
in accordance with ASTM Standard Acan additionally be supplied with spe123. Aluminum products are comcialty custom finishes such as enamel
monly supplied as mill finished, but
or epoxy coatings. When considering
are also available with optional
such finishes, careful evaluation of
anodized finishes. Stainless steel
the specified material and consultaproducts as produced typically require
tion with the coating manufacturer is
secondary finishing such as chemical
essential.
www.gratingpacific.com
PLAIN SURFACE
OPTIONAL
SERRATED SURFACE
4"
TYPE W-19-4
2"
OTHER BAR
SPACINGS
AVAILABLE
Standard Welded Grating with bearing bars spaced at 1-3/16" on center and
cross bars at 4" on center. The workhorse of industrial flooring products
serving a multitude of applications.
13 16"
2"
13 16"
Bearing bars spaced at 1-3/16" on center and close spaced cross bars at 2" on
center. Preferred for short spans and where small wheeled carts must smoothly
pass over the grating.
TYPE W-19-2
4"
15
Bearing bars spaced at 15/16 on center with cross bars at 4" on center. Provides
additional floor surface area and increases load capacity by 26% when compared to
standard spaced products.
"
16
TYPE W-15-4
2"
15
2"
"
16
Bearing bars spaced at 15/16 on center and close spaced cross bars at 2"
on center. Yields the dual advantage of closer spaced bearing bars and
cross bars.
TYPE W-15-2
4"
ADA
CONFORMING
SPACINGS
11
The bar spacings on types W-11-4 and W-11-2 both conform with the
rigid provisions of the Americans with Disabilities Act. When specifying
gratings to comply with ADA requirements, it is critical to specify 3/16 thick
bearing bars that span "perpendicular to the normal flow of traffic."
"
16
TYPE W-11-4
2"
11
2"
"
16
TYPE W-11-2
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
S t e e l B ar Gr a ting Lo a d Ta b l e
19-4 / 19-2 LOAD TABLE
UNSUPPORTED SPAN
BEARING BAR
SIZE
3/4 x 1/8
3/4 x 3/16
1 x 1/8
1 x 3/16
1-1/4 x 1/8
1-1/4 x 3/16
1-1/2 x 1/8
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
2'-0"
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
355
.099
355
.079
533
.099
533
.079
632
.074
632
.060
947
.074
947
.060
987
.060
987
.048
1480
.060
1480
.048
1421
.050
1421
.040
2132
.050
2132
.040
2901
.043
2901
.034
3789
.037
3789
.030
4796
.033
4796
.026
5921
.030
5921
.024
227
.155
284
.124
341
.155
426
.124
404
.116
505
.093
606
.116
758
.093
632
.093
789
.074
947
.093
1184
.074
909
.078
1137
.062
1364
.078
1705
.062
1857
.067
2321
.053
2425
.058
3032
.047
3069
.052
3837
.041
3789
.047
4737
.037
158
.223
237
.179
237
.223
355
.179
281
.168
421
.134
421
.168
632
.134
439
.134
658
.107
658
.134
987
.107
632
.112
947
.089
947
.112
1421
.089
1289
.096
1934
.077
1684
.084
2526
.067
2132
.074
3197
.060
2632
.067
3947
.054
116
.304
203
.243
174
.304
305
.243
206
.228
361
.182
309
.228
541
.182
322
.182
564
.146
483
.182
846
.146
464
.152
812
.122
696
.152
1218
.122
947
.130
1658
.104
1237
.114
2165
.091
1566
.101
2741
.081
1933
.091
3383
.073
89
.397
178
.318
133
.397
266
.318
156
.298
316
.238
237
.298
474
.238
247
.238
493
.191
370
.238
740
.191
355
.199
711
.159
533
.199
1066
.159
725
.170
1451
.136
947
.149
1895
.119
1199
.132
2398
.106
1480
.119
2961
.095
70
.503
158
.402
105
.503
237
.402
125
.377
281
.302
187
.377
421
.302
195
.302
439
.241
292
.302
658
.241
281
.251
632
.201
421
.251
947
.201
573
.215
1289
.172
749
.189
1684
.151
947
.168
2132
.134
1170
.151
2632
.121
5'-0"
5'-6"
6'-6"
7'-0"
8'-0"
84
.563
230
.451
125
.563
344
.451
130
.451
359
.360
196
.451
538
.360
188
.376
517
.300
282
.376
775
.300
384
.322
1055
.257
501
.282
1378
.225
634
.250
1744
.200
783
.225
2153
.180
70
.670
211
.536
105
.670
316
.536
110
.536
329
.429
164
.536
493
.429
158
.447
474
.358
237
.447
711
.358
322
.383
967
.306
421
.335
1263
.268
533
.298
1599
.238
658
.268
1974
.215
81
.730
282
.584
121
.730
423
.584
116
.608
406
.487
174
.608
609
.487
237
.521
829
.417
309
.456
1083
.365
392
.406
1370
.324
483
.365
1692
.292
4.0
4.8
4.9
5.7
6.4
7.2
9.7 10.7
5.6
6.4
6.9
7.7
5.1
5.9
6.2
7.1
8.2
7.4
8.4
6.4
7.4
7.8
NOTE: WHEN GRATINGS WITH SERRATED BEARING BARS ARE SELECTED, THE DEPTH OF GRATING REQUIRED TO SERVICE A SPECIFIED LOAD WILL BE 1/4" GREATER THAN THAT SHOWN IN THE TABLES ABOVE.
CONVERSION TABLE
The loads shown above are for type 19-4 and 19-2 gratings. To determine the load carrying capacity for alternative bar spacings, multiply the loads given by the following conversion factors (DEFLECTION REMAINS CONSTANT): FOR TYPES 15-4 AND 15-2: 1.26 FOR TYPES 11-4 AND 11-2: 1.72 FOR TYPES 7-4 AND 7-2: 2.71
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
50
75
100
125
150
200
300
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16 2-1/4 x 3/16 2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 1/8 1-1/2 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 3/16
1 x 3/16
5'-0"
8'-0"
9'-0"
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
5'-6"
2 x 3/16
6'-0"
2 x 3/16
6'-6"
2 x 3/16
7'-0"
www.gratingpacific.com
4"
Bearing Bars at
1-3/16" O.C.
13 16"
Cross Bars at
4" O.C.
TYPE 19-4
2"
OTHER BAR
SPACINGS
AVAILABLE
2"
13 16"
4"
15
"
Cross Bars at
4" O.C.
"
2"
11
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
Cross Bars at
4" O.C.
2"
"
16
Bearing Bars at
7/16" O.C.
4"
7
"
16
Cross Bars at
4" O.C.
TYPE 7-4
2"
7
2"
"
Bearing Bars at
7/16" O.C.
16
Cross Bars at
2" O.C.
TYPE 7-2
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
Bearing Bars at
11/16" O.C.
Cross Bars at
2" O.C.
TYPE 11-2
16
TYPE 15-2
"
16
2"
Bearing Bars at
15/16" O.C.
Cross Bars at
2" O.C.
Bearing Bars at
11/16" O.C.
TYPE 11-4
16
2"
11
Bearing Bars at
15/16" O.C.
TYPE 15-4
15
4"
Bearing Bars at
1-3/16" O.C.
Cross Bars at
2" O.C.
TYPE 19-2
ADA
CONFORMING
SPACINGS
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
A l u m i n u m G r a t i n g L o a d Ta b l e
19-4 / 19-2 LOAD TABLE
UNSUPPORTED SPAN
BEARING BAR
SIZE
1 x 1/8
1 x 3/16
OR 1" I-BAR
1-1/4 x 1/8
1-1/4 x 3/16
OR 1-1/4 I-BAR
1-1/2 x 1/8
1-1/2 x 3/16
OR 1-1/2" I-BAR
1-3/4 x 3/16
OR 1-3/4" I-BAR
2 x 3/16
OR 2" I-BAR
2-1/4 x 3/16
OR 2-1/4" I-BAR
2-1/2 x 3/16
OR 2-1/2" I-BAR
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
2'-0"
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
5'-0"
421
.144
421
.115
632
.144
632
.115
658
.115
658
.092
987
.115
987
.092
947
.096
947
.077
1421
.096
1421
.077
1934
.082
1934
.066
2526
.072
2526
.058
3197
.064
3197
.051
3947
.058
3947
.046
269
.225
337
.180
404
.225
505
.180
421
.180
526
.144
632
.180
789
.144
606
.150
758
.120
909
.150
1137
.120
1238
.129
1547
.103
1617
.113
2021
.090
2046
.100
2558
.080
2526
.090
3158
.072
187
.324
281
.259
281
.324
421
.259
292
.259
439
.207
439
.259
658
.207
421
.216
632
.173
632
.216
947
.173
860
.185
1289
.148
1123
.162
1684
.130
1421
.144
2132
.115
1754
.130
2632
.104
137
.441
241
.353
206
.441
361
.353
215
.353
376
.282
322
.353
564
.282
309
.294
541
.235
464
.294
812
.235
632
.252
1105
.202
825
.221
1444
.176
1044
.196
1827
.157
1289
.176
2256
.141
105
.576
211
.461
158
.576
316
.461
164
.461
329
.369
247
.461
493
.369
237
.384
474
.307
355
.384
711
.307
484
.329
967
.263
632
.288
1263
.230
799
.256
1599
.205
987
.230
1974
.184
83
.729
187
.583
125
.729
281
.583
130
.583
292
.467
195
.583
439
.467
187
.486
421
.389
281
.486
632
.389
382
.417
860
.333
499
.365
1123
.292
632
.324
1421
.259
780
.292
1754
.233
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
2.2
2.2
2.6
2.9
3.3
4.4
4.7
2.6
2.9
3.2
3.5
4.2
4.5
6.4
6.7
2.2
2.5
2.7
3.0
3.6
3.9
5.4
5.7
3.1
3.5
3.9
4.2
5.2
5.5
7.9
8.3
2.6
2.9
3.2
3.5
4.2
4.5
6.4
6.7
3.7
4.0
4.6
4.9
6.1
6.5
9.4
9.8
4.2
4.6
5.3
5.6
7.1
4.8
5.1
6.0
6.3
8.0
5.4
5.7
6.7
7.0
9.0
5.9
6.3
7.4
NOTE: WHEN GRATINGS WITH SERRATED BEARING BARS ARE SELECTED, THE DEPTH OF GRATING REQUIRED TO SERVICE A SPECIFIED LOAD WILL BE 1/4" GREATER THAN THAT SHOWN IN THE TABLES ABOVE.
CONVERSION TABLE
The loads shown above are for type 19-4 and 19-2 gratings. To determine the load carrying capacity for alternative bar spacings, multiply the loads given by the followFOR TYPES 11-4 AND 11-2: 1.72 FOR TYPES 7-4 AND 7-2: 2.71
ing conversion factors (DEFLECTION REMAINS CONSTANT): FOR TYPES 15-4 AND 15-2: 1.26
2'-0"
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
50
75
100
125
150
200
300
1 x 1/8
1 x 1/8
1 x 3/16
1 x 3/16
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
1 x 3/16
1-1/4 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
www.gratingpacific.com
aa
ISOMETRIC
SWAGED INTERSECTION
CLOSE MESH
TYPE PS-7-4
ISOMETRIC
DOVETAIL INTERSECTION
STANDARD MESH
TYPE PD-19-4
MATERIALS
FABRICATION
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
4"
Bearing Bars at
1-3/16" O.C.
13 16"
Cross Bars at
4" O.C.
TYPE 19-4
2"
OTHER BAR
SPACINGS
AVAILABLE
2"
Bearing Bars at
1-3/16" O.C.
"
Cross Bars at
2" O.C.
4"
Bearing Bars at
15/16" O.C.
"
16
Cross Bars at
4" O.C.
TYPE 15-4
2"
15
4"
11
2"
Bearing Bars at
15/16" O.C.
"
16
Cross Bars at
2" O.C.
TYPE 15-2
Bearing Bars at
11/16" O.C.
"
16
Cross Bars at
4" O.C.
TYPE 11-4
2"
11
16
TYPE 19-2
15
ADA
CONFORMING
SPACINGS
2"
"
16
Cross Bars at
2" O.C.
TYPE 11-2
Bearing Bars at
7/16" O.C.
4"
7
"
16
Cross Bars at
4" O.C.
TYPE 7-4
2"
7
Bearing Bars at
11/16" O.C.
2"
"
Bearing Bars at
7/16" O.C.
16
Cross Bars at
2" O.C.
TYPE 7-2
www.gratingpacific.com
10
Economic welded grating with forged bearing bar/cross bar intersection. Available
with bearing bars spaced at 1-3/16" and
15/16" on center. Intersections subject to
carbon precipitation caused by welding.
4"
1
Bearing Bars at
1-3/16" O.C.
"
16
Cross Bars at
4" O.C.
TYPE 19-4
2"
OTHER BAR
SPACINGS
AVAILABLE
2"
"
11
Cross Bars at
4" O.C.
2"
"
2"
Bearing Bars at
7/16" O.C.
"
16
Cross Bars at
4" O.C.
2"
Bearing Bars at
11/16" O.C.
Cross Bars at
2" O.C.
TYPE 7-4
16
TYPE 15-2
"
16
4"
7
Bearing Bars at
15/16" O.C.
Cross Bars at
2" O.C.
2"
TYPE 11-2
16
TYPE 15-4
Cross Bars at
4" O.C.
2"
Bearing Bars at
15/16" O.C.
"
Bearing Bars at
11/16" O.C.
"
16
TYPE 11-4
Bearing Bars at
1-3/16" O.C.
Cross Bars at
2" O.C.
4"
15
4"
11
16
TYPE 19-2
15
ADA
CONFORMING
SPACINGS
2"
"
Bearing Bars at
7/16" O.C.
16
TYPE 7-2
Cross Bars at
2" O.C.
FINISHING
As produced, stainless steel products typically display discoloration due to cutting and welding. If appearance is a
factor, consideration should be given to secondary cleaning such as abrasive blasting, passivating or electro polishing.
11
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
BEARING BAR
SIZE
3/4 x 1/8
3/4 x 3/16
1 x 1/8
1 x 3/16
1-1/4 x 1/8
1-1/4 x 3/16
1-1/2 x 1/8
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
2'-0"
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
395
.114
395
.091
592
.114
592
.091
702
.086
702
.069
1053
.086
1053
.069
1096
.069
1096
.055
1645
.069
1645
.055
1579
.057
1579
.046
2368
.057
2368
.046
3224
.049
3224
.039
4211
.043
4211
.034
5329
.038
5329
.030
6579
.034
6579
.027
253
.179
316
.143
379
.179
474
.143
449
.134
561
.107
674
.134
842
.107
702
.107
877
.086
1053
.107
1316
.086
1011
.089
1263
.071
1516
.089
1895
.071
2063
.077
2579
.061
2695
.067
3368
.054
3411
.060
4263
.048
4211
.054
5263
.043
175
.257
263
.206
263
.257
395
.206
312
.193
468
.154
468
.193
702
.154
487
.154
731
.123
731
.154
1096
.123
702
.129
1053
.103
1053
.129
1579
.103
1433
.110
2149
.088
1871
.096
2807
.077
2368
.086
3553
.069
2924
.077
4386
.062
129
.350
226
.280
193
.350
338
.280
229
.263
401
.210
344
.263
602
.210
358
.210
627
.168
537
.210
940
.168
516
.175
902
.140
773
.175
1353
.140
1053
.150
1842
.120
1375
.131
2406
.105
1740
.117
3045
.093
2148
.105
3759
.084
99
.457
197
.366
148
.457
296
.366
175
.343
351
.274
263
.343
526
.274
274
.274
548
.219
411
.274
822
.219
395
.229
789
.183
592
.229
1184
.183
806
.196
1612
.157
1053
.171
2105
.137
1332
.152
2664
.122
1645
.137
3289
.110
78
.579
175
.463
117
.579
263
.463
139
.434
312
.347
208
.434
468
.347
217
.347
487
.278
325
.347
731
.278
312
.289
702
.231
468
.289
1053
.231
637
.248
1433
.198
832
.217
1871
.174
1053
.193
2368
.154
1300
.174
2924
.139
5'-0"
5'-6"
6'-6"
7'-0"
8'-0"
93
.648
255
.519
139
.648
383
.519
145
.519
399
.415
217
.519
598
.415
209
.432
574
.346
313
.432
861
.346
426
.370
1172
.296
557
.324
1531
.259
705
.288
1938
.230
870
.259
2392
.207
78
.771
234
.617
117
.771
351
.617
122
.617
365
.494
183
.617
548
.494
175
.514
526
.411
263
.514
789
.411
358
.441
1075
.353
468
.386
1404
.309
592
.343
1776
.274
731
.309
2193
.247
90
.840
313
.672
134
.840
470
.672
129
.700
451
.560
193
.700
677
.560
263
.600
921
.480
344
.525
1203
.420
435
.467
1523
.373
537
.420
1880
.336
4.0
4.8
4.9
5.7
6.4
7.2
9.7 10.7
5.6
6.4
6.9
7.7
5.1
5.9
6.2
7.1
8.2
7.4
8.4
6.4
7.4
7.8
18.8 20.0
28.1 30.1
32.5 34.4
36.9 38.8
41.3 43.2
45.6 47.5
NOTE: WHEN GRATINGS WITH SERRATED BEARING BARS ARE SELECTED, THE DEPTH OF GRATING REQUIRED TO SERVICE A SPECIFIED LOAD WILL BE 1/4" GREATER THAN THAT SHOWN IN THE TABLES ABOVE.
CONVERSION TABLE
The loads shown above are for type 19-4 and 19-2 gratings. To determine the load carrying capacity for alternative bar spacings, multiply the loads given by the following
conversion factors (DEFLECTION REMAINS CONSTANT): FOR TYPES 15-4 AND 15-2: 1.26
FOR TYPES 11-4 AND 11-2: 1.72 FOR TYPES 7-4 AND 7-2: 2.71
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
8'-0"
9'-0"
50
75
100
125
150
200
300
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16 2-1/4 x 3/16 2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 1/8
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1 x 3/16
2 x 3/16
2 x 3/16
2-1/2 x 3/16
1 x 1/8
1 x 1/8
1 x 1/8
1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 3/16 1-3/4 x 3/16 1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
1 x 1/8
1 x 1/8
1 x 3/16
5'-0"
5'-6"
2 x 3/16
6'-0"
2 x 3/16
6'-6"
7'-0"
www.gratingpacific.com
12
Riveted Grating
TYPE R-18-7
RIVETED GRATING
31 2 "
7"
1
"
TYPE R-18-7
"
TYPE R-18-3.5
7"
3
"
TYPE R-12-7
31 2 "
3
"
TYPE R-12-3.5
SERRATED SURFACE
When the walking surface of bar gratings are subject to the accumulation of moisture or other slippery substances, the
optional serrated surface should be considered. Unlike rectangular mesh gratings where the bearing bars are typically constructed with the serrated surface, the standard method of manufacture for riveted gratings is to serrate the crimped cross
member. When the grating is assembled, these crimp bars are allowed to project slightly above the top surface of the bearing
bars to provide a superior unidirectional skid resistant surface. Environments particularly prone to unsafe walking conditions
can be further specified as 100% serrated where both the bearing bars and the crimp bars are provided with serrations.
13
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Ri v e t e d Gra ti ng L oa d Ta b l e
R-18-7 / R-18-3.5 LOAD TABLE
UNSUPPORTED SPAN
BEARING BAR
SIZE
1 x 1/8
1 x 3/16
1-1/4 x 1/8
1-1/4 x 3/16
1-1/2 x 1/8
1-1/2 x 3/16
1-3/4 x 3/16
2 x 3/16
2-1/4 x 3/16
2-1/2 x 3/16
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
2'-0"
2'-6"
3'-0"
3'-6"
4'-0"
4'-6"
5'-0"
788
.072
788
.058
1184
.072
1184
.058
1232
.058
1232
.046
1851
.058
1851
.046
1775
.048
1775
.038
2668
.048
2668
.038
3631
.041
3651
.033
4743
.036
4743
.029
6004
.032
6004
.026
7411
.029
7411
.023
504
.112
631
.090
757
.112
947
.090
788
.090
986
.072
1185
.090
1481
.072
1136
.075
1421
.060
1707
.075
2134
.060
2324
.064
2904
.051
3036
.056
3795
.045
3842
.050
4802
.040
4743
.045
5929
.036
350
.162
526
.130
526
.162
788
.130
548
.130
822
.104
823
.130
1235
.104
788
.108
1184
.086
1185
.108
1779
.086
1614
.093
2420
.074
2107
.081
3162
.065
2691
.072
4002
.058
3293
.065
4941
.052
257
.220
450
.176
386
.220
676
.176
402
.176
704
.141
604
.176
1058
.141
579
.147
1014
.118
871
.147
1524
.118
1185
.126
2075
.101
1549
.110
2710
.088
1959
.098
3430
.078
2419
.088
4235
.070
197
.289
394
.230
295
.289
592
.230
308
.230
616
.184
463
.230
925
.184
443
.192
887
.154
667
.192
1334
.154
908
.165
1815
.132
1185
.144
2371
.115
1500
.128
3001
.102
1852
.115
3705
.192
156
.365
350
.292
233
.365
526
.292
243
.292
548
.233
365
.292
823
.233
350
.243
788
.194
526
.243
1185
.194
717
.208
1614
.167
937
.182
2107
.146
1185
.162
2668
.130
1463
.146
3293
.117
126
.451
315
.360
189
.451
473
.360
197
.360
493
.288
296
.360
740
.288
284
.300
710
.240
426
.300
1067
.240
580
.257
1452
.206
759
.225
1897
.180
960
.200
2401
.160
1185
.180
2964
.144
5'-6"
156
.545
430
.436
163
.435
448
.348
244
.435
673
.348
234
.363
646
.291
353
.363
970
.291
480
.312
1320
.249
626
.272
1725
.218
793
.242
2182
.194
979
.218
2695
.174
6'-6"
7'-0"
LOADS AND DEFLECTIONS ARE THEORETICAL VALUES BASED ON 18,000 PSI STEEL
OR 12,000 PSI ALUMINUM UNIT STRESS.
FOR PEDESTRIAN COMFORT, DEFLECTIONS
IN EXCESS OF 1/4" ARE NOT RECOMMENDED.
U = SAFE UNIFORM LOAD, LBS. PER SQ. FT.
C = SAFE CONCENTRATED MID-SPAN LOAD,
LBS. PER FT. OF GRATING WIDTH
D = DEFLECTION IN INCHES
205
.516
617
.415
197
.432
592
.346
296
.432
888
.346
403
.370
1210
.296
526
.324
1581
.259
667
.288
2001
.230
823
.259
2470
.207
174
.607
570
.486
167
.506
546
.405
253
.506
821
.405
343
.435
1117
.348
448
.380
1459
.304
568
.338
1846
.270
701
.304
2280
.243
150
.704
466
.562
144
.587
507
.470
217
.587
762
.470
296
.505
1037
.403
387
.441
1354
.353
489
.392
1715
.314
604
.353
2117
.282
166
.765
667
.614
226
.657
908
.527
296
.576
1185
.461
374
.512
1500
.410
463
.461
1852
.369
7.6
10.6
2.7
3.9
9.4
12.8
3.3
4.5
8.7
12.1
3.1
4.4
11.0
15.0
3.8
5.3
9.9
13.6
3.4
5.0
12.5
17.1
4.4
6.1
14.2
19.4
4.9
6.8
16.8
22.9
5.8
8.1
18.3
25.0
6.4
8.9
19.8
27.2
6.9
9.6
TO DEVELOP THE WEIGHT PER SQ. FT. FOR GRATINGS WITH RIVETS AT 3-1/2" O.C. ADD THE FOLLOWING FACTORS TO THE VALUES ABOVE:
FOR STEEL GRATINGS:
0.4 # PER SQ. FT.
FOR ALUMINUM GRATINGS: 0.2 # PER SQ. FT.
CONVERSION TABLE
The loads shown above are for Riveted Steel Gratings type R-18-7 and R-18-3.5. To determine the load carrying capacities and deflections for alternative bar
spacings, multiply the values given by the following conversion factors:
www.gratingpacific.com
14
RECTANGULAR
PUNCHED
SQUARE
PUNCHED
ROUND
PUNCHED
Solid surface
plank with
fluted skid
resistant walking surface.
Ideal for use
as an economical solid aluminum floor.
Popular 19/32"
x 3" staggered
pattern provides
maximum clear
opening and
distinctive
architectural
appearance.
Linear 19/32"
square pattern
offers restricted
clear openings
and is available in light
and heavy
duty planks.
Round
punched plank
with standard
13/16" in-line
pattern shown,
1" round staggered pattern is
also available.
PLANK
DEPTH
WT.
PER
SQ.
FT.
3/4"
2.2
1"
2.6
"
thru
2 2"
4
1.200"
1.200"
6"
1-1/4" 3.2
1-1/2" 3.8
1-3/4" 4.4
2"
4.9
6"
2-1/4" 5.5
2-1/2" 5.9
15
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
CLEAR SPAN
2'-0" 2'-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 8'-0"
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
435
.121
435
.121
833
.124
833
.099
1464
.107
1464
.085
2167
.090
2167
.072
2992
.078
2992
.062
3975
.069
3975
.055
5109
.061
5109
.048
5971
.055
5971
.044
278
.237
348
.190
533
.193
666
.155
936
.167
1171
.133
1387
.141
1734
.113
1915
.123
2394
.098
2544
.108
3180
.086
3270
.095
4087
.076
3821
.086
4777
.069
193
.342
290
.273
370
.279
555
.223
650
.241
976
.192
963
.203
1445
.163
1330
.177
1995
.141
1766
.156
2650
.124
2270
.137
3406
.110
2654
.124
3981
.099
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
142
.465
248
.371
272
.380
476
.304
478
.328
836
.262
707
.277
1238
.221
977
.241
1710
.192
1298
.212
2271
.169
1668
.187
2919
.149
1949
.169
3412
.135
108
.608
217
.485
208
.496
416
.396
366
.428
732
.342
541
.362
1083
.289
748
.315
1496
.251
993
.277
1987
.221
1277
.244
2554
.195
1492
.221
2985
.176
85
.770
193
.614
164
.628
370
.502
289
.542
650
.433
428
.458
963
.366
591
.398
1330
.318
785
.351
1766
.280
1009
.309
2270
.247
1179
.279
2654
.223
69
.950
174
.760
133
.775
333
.620
234
.669
585
.535
346
.566
867
.452
478
.492
1197
.393
636
.433
1590
.346
817
.382
2043
.305
955
.345
2388
.276
193 162
138 119
.810 .964 1.131 1.312
532 488
450 418
.647 .771 .904 1.049
286 240
205
176
.684 .815 .956 1.109
788 722
666
619
.547 .651 .764 .887
395 332
283
244
.595 .708 .832 .964
1088 997
920
855
.476 .566 .644 .771
525 441
376
324
.524 .624 .732 .849
1445 1325 1223 1135
.419 .499 .586 .679
675 567
483
417
.462 .550 .646 .749
1858 1703 1572 1459
.370 .440 .517 .599
789 663
565
487
.418 .497 .584 .677
2171 1990 1837 1706
.334 .398 .467 .541
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
91
1.714
366
1.371
135
1.449
541
1.157
187
1.260
748
1.007
248
1.109
993
.887
319
.979
1277
.783
373
.884
1492
.707
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
S t a i r Tr e a d s
rating Pacific fabricated Stair Treads are manufactured in the full range of products offered
in this catalog. Carbon steel, aluminum and
stainless steel treads are manufactured with a variety of
defined, visible nosings, and pre-punched end or c a rrier
plates, ready for bolting to the stair stringers.
11 8"
"A" Dimension
(See Table)
7
"
16
Hole
*STEEL TREADS
3/4" thru 1-1/4" bearing bars = 1-3/4"
1-1/2" thru 2" bearing bars = 2-1/4"
WIDTH
W-19-4 1 x 3/16
STEEL WITH CHECKER
PLATE NOSING
LENGTH
PS-7-4 1 x 3/16
STEEL WITH CAST
ABRASIVE NOSING
16
*ALUMINUM TREADS
All sizes = 2-1/4"
NUMBER OF STANDARD
BEARING
"A"
BARS
DIMENSION
6-1/4"
7-3/8"
8-1/2"
9-3/4"
11"
12-1/8"
5
6
7
8
9
10
2-1/2"
4-1/2"
4-1/2"
7"
7"
7"
NOMINAL
TREAD
WIDTH
6-1/8"
7-1/8"
8"
9"
9-7/8"
10-7/8"
11-3/4"
NUMBER OF STANDARD
BEARING
"A"
BARS
DIMENSION
6
7
8
9
10
11
12
2-1/2"
4-1/2"
4-1/2"
4-1/2"
7"
7"
7"
NOSING SELECTION
A-19-4 1 x 3/16
ALUMINUM WITH CORRUGATED
ALUMINUM NOSING
CHECKER PLATE
NOSING
CORRUGATED ALUMINUM
NOSING
(Available on aluminum
treads only)
SERRATED
PLAIN
SERRATED
BEARING
BAR SIZE
2'-4"
3'-5"
4'-8"
5'-6"
2'-10"
4'-2"
5'-3"
2'-8"
4'-0"
5'-1"
5'-6"
3'-4"
4'-6"
5'-6"
1 x 3/16
1-1/4 x 3/16
1-1/2 x 3/16
1-3/4 x 3/16
SERRATED
PLAIN
SERRATED
2'-4"
2'-10"
3'-6"
4'-3"
2'-7"
3'-2"
3'-10"
2'-6"
3'-1"
3'-10"
4'-8"
2'-9"
3'-6"
4'-3"
* For treads up to 5'-6", maximum tread lengths are based on 300 lb. concentrated load on the front 5 inches of tread, at center of tread length, and deflection
limited to 1/240 of tread length. When treads exceed 5'-6" in length, design allows for 300 lb. concentrated loads at 1/3 points of tread length.
www.gratingpacific.com
16
STANDARD
CROSS BARS
OPTIONAL:
RECTANGULAR
CROSS BARS
"
2"
15
16
TYPE W-15-4
2"
"
16
TYPE W-15-2
2"
4"
13 16"
TYPE W-19-4
2"
13 16"
TYPE W-19-2
2"
4"
13 8 "
TYPE W-22-4
2"
13 8"
TYPE W-22-2
4"
2"
17 8 "
2"
17 8 "
TYPE W-30-2
TYPE W-30-4
4"
2"
2 3 8"
TYPE W-38-4
2"
2 3 8"
TYPE W-38-2
BANDING
SERRATED SURFACE
17
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
WHEEL LOAD
(LBS.)
(1/2 OF AXLE
LOAD + 30%
IMPACT)
LOAD DISTRIBUTION
PARALLEL
WITH AXLE
PERPENDICULAR
TO AXLE
Truck Traffic
32,000 Lb. Axle Load
Dual Wheels
Modified AASHTO H-20
20"
Truck Traffic
24,000 Lb. Axle Load
Dual Wheels
AASHTO H-15
15"
Truck Traffic
16,000 Lb. Axle Load
Single Wheels
AASHTO H-10
10"
Automobile Traffic
5,000 Lb. Vehicle
1,200 Lb. Load
55% Drive Axle Load
2,220
2 (C) + 8"
8"
13,480
2 (C) + 11"
11"
8,730
2 (C) + 7"
7"
3,425
2 (C) + 4"
4"
*C = CENTER-TO-CENTER SPACING
OF BEARING BARS
ALLOWABLE STRESS
- 20,000 PSI
MODULUS OF ELASTICITY - 29,000,000 PSI
THICKNESS
1/4"
5/16"
3/8"
1/4"
5/16" - 1/2"
1/4"
5/16" - 1/2"
DEPTH
1" - 2-1/2"
1" - 2-1/2"
1" - 2-1/2"
3" - 5"
3" - 5"
5-1/2" - 7"
5-1/2" - 7"
STANDARD LOADS
5/16" Twisted
5/16" Twisted
5/16" Twisted
5/16" Twisted
3/8" Round
3/8" Round
3/8" Round
SEVERE LOADS
5/16" Twisted
5/16" Twisted
5/16" Twisted
1 x 1/4
1 x 3/8
1-1/4 x 1/4
1-1/4 x 3/8
STANDARD LOADS
5/16" Twisted
5/16" Twisted
5/16" Twisted
3/8" Round
7/16" Round
7/16" Round
7/16" Round
SEVERE LOADS
5/16" Twisted
5/16" Twisted
5/16" Twisted
1 x 1/4
1 x 3/8
1-1/4 x 1/4
1-1/4 x 3/8
THE SIZES SHOWN ABOVE ARE LISTED AS MINIMUMS. TWISTED AND ROUND CROSS BARS ARE TYPICALLY INTERCHANGEABLE AND, UNLESS OTHERWISE SPECIFIED, MAY BE SUBSTITUTED AT THE
DISCRETION OF THE MANUFACTURER. IN SUBSTITUTION, THE CROSS SECTIONAL AREA OF THE ALTERNATIVE CROSS BAR SHALL EQUAL OR EXCEED THAT OF THE MINIMUM SIZE LISTED ABOVE.
www.gratingpacific.com
18
W-22-4
3-1/2" x 3/8"
with __________________
bearing bars
Alamitos, CA 90720, (800) 321-4314. Grating shall be type _________________
1-3/8"
1" x 3/8"
4
spaced at __________inches
on center and ____________cross
bars spaced at _________
inches on center. Weight per
H-20 TRUCK
WEIGHT LBS.
PER SQ. FT.
BEARING
BAR SIZE
1 x 1/4
1 x 5/I6
1 x 3/8
1-1/4 x 1/4
1-1/4 x 5/16
1-1/4 x 3/8
1-1/2 x 1/4
1-1/2 x 5/16
1-1/2 x 3/8
1-3/4 x 1/4
1-3/4 x 5/16
1-3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2-1/4 x 1/4
2-1/4 x 5/16
2-1/4 x 3/8
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
19
H-15 TRUCK
12.4
15.2
18.1
15.3
18.5
22.3
18.1
22.4
26.6
21.0
25.9
30.9
23.8
29.5
35.1
26.7
33.0
39.4
29.5
36.6
43.7
35.2
43.9
52.3
40.9
51.0
60.8
46.7
58.1
69.4
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
SECTION
MOD. PER
FT. OF WIDTH
0.533
0.667
0.800
0.833
1.042
1.250
1.200
1.500
1.800
1.633
2.042
2.450
2.133
2.667
3.200
2.700
3.375
4.050
3.333
4.167
5.000
4.800
6.000
7.200
6.533
8.167
9.800
8.533
10.667
12.800
H-10 TRUCK
CROSS BAR
SIZE
AUTO TRAFFIC
H-20
TRUCK
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0-7"
0'-8"
0'-8"
0'-9"
0'-10"
0'-11"
0'-11"
1'-1"
1'-3"
1'-2"
1'-5"
1'-8"
1'-5"
1'-9"
2'-1"
1'-9"
2'-2"
2'-6"
2'-2"
2'-7"
3'-1"
3'-0"
3'-8"
4'-4"
3'-11"
4'-10"
5'-3"
5'-1"
5'-8"
6'-0"
0'-8"
0'-9"
0'-11"
0'-11"
1'-1"
1'-4"
1'-3"
1'-5"
1'-10"
1'-8"
2'-1"
2'-6"
2'-2"
2'-8"
3'-2"
2'-8"
3'-4"
4'-0"
3'-4"
4'-1"
4'-5"
4'-8"
5'-0"
5'-4"
5'-5"
5'-10"
6'-3"
6'-3"
6'-9"
7'-2"
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
1'-1"
1'-2"
1'-3"
1'-3"
1'-5"
1'-6"
1'-6"
1'-8"
1'-10"
1'-9"
2'-0"
2'-3"
2'-0"
2'-4"
2'-8"
2'-4"
2'-9"
3'-2"
2'-9"
3'-3"
3'-9"
3'-7"
4'-4"
4'-7"
4'-7"
5'-1"
5'-4"
5'-4"
5'-9"
6'-2"
0'-11"
1'-0"
1'-1"
1'-1"
1'-3"
1'-4"
1'-4"
1'-6"
1'-8"
1'-7"
1'-10"
2'-1"
1'-10"
2'-2"
2'-6"
2'-2"
2'-7"
3'-0"
2'-7"
3'-1"
3'-7"
3'-6"
4'-2"
4'-8"
4'-6"
5'-1"
5'-5"
5'-5"
5'-10"
6'-2"
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
0'-9"
0'-10"
0'-11"
0'-11"
1'-0"
1'-2"
1'-2"
1'-4"
1'-6"
1'-5"
1'-8"
1'-11"
1'-9"
2'-1"
2'-5"
2'-1"
2'-6"
2'-11"
2'-6"
3'-0"
3'-7"
3'-5"
4'-2"
4'-8"
4'-6"
5'-2"
5'-6"
5'-5"
5'-11"
6'-3"
1'-7"
1'-10"
1'-11"
2'-2"
2'-5"
2'-8"
2'-10"
3'-2"
3'-6"
3'-7"
4'-0"
4'-3"
4'-3"
4'-7"
4'-11"
4'-10"
5'-2"
5'-6"
5'-4"
5'-9"
6'-2"
6'-5"
6'-11"
7'-4"
7'-6"
8'-1"
8'-7"
8'-7"
9'-3"
9'-8"
0'-8"
0'-9"
0'-10"
0'-10"
1'-0"
1'-1"
1'-1"
1'-3"
1'-4"
1'-3"
1'-6"
1'-9"
1'-7"
1'-10"
2'-1"
1'-10"
2'-2"
2'-7"
2'-2"
2'-8"
3'-1"
3'-0"
3'-7"
4'-3"
3'-11"
4'-9"
5'-2"
4'-11"
5'-6"
5'-11"
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
H-20 TRUCK
BEARING
BAR SIZE
1 x 1/4
1 x 5/16
1 x 3/8
1-1/4 x 1/4
1-1/4 x 5/16
1-1/4 x 3/8
1-1/2 x 1/4
1-1/2 x 5/16
1-1/2 x 3/8
1-3/4 x 1/4
1-3/4 x 5/16
1-3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2-1/4 x 1/4
2-1/4 x 5/16
2-1/4 x 3/8
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
5 x 1/4
5 x 3/8
5 x 1/2
6 x 1/4
6 x 3/8
6 x 1/2
7 x 1/4
7 x 3/8
7 x 1/2
H-15 TRUCK
WEIGHT LBS.
PER SQ. FT.
10.1
12.3
14.6
12.3
15.1
17.9
14.6
18.0
21.3
16.9
20.8
24.7
19.1
23.6
28.2
21.4
26.5
31.5
23.7
29.3
34.9
28.2
35.1
41.8
32.8
40.7
48.6
37.3
46.4
55.4
46.4
68.9
91.3
55.6
82.5
109.3
64.6
96.0
127.3
H-10 TRUCK
SECTION
MOD. PER
FT. OF WIDTH
0.421
0.526
0.632
0.658
0.822
0.987
0.947
1.184
1.421
1.289
1.612
1.934
1.684
2.105
2.526
2.131
2.664
3.197
2.631
3.289
3.947
3.789
4.736
5.684
5.157
6.447
7.736
6.736
8.420
11.104
10.525
15.788
21.050
15.156
22.734
30.312
20.629
30.944
41.258
CROSS BAR
SIZE
AUTO TRAFFIC
H-20
TRUCK
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0'-6"
0'-7"
0'-8"
0'-8"
0'-9"
0'-10"
0'-10"
0'-11"
1'-1"
1'-0"
1'-3"
1'-5"
1'-3"
1'-6"
1'-7"
1'-6"
1'-10"
2'-2"
1'-10"
2'-3"
2'-7"
2'-6"
3'-1"
3'-8"
3'-4"
4'-1"
4'-10"
4'-3"
5'-3"
5'-8"
6'-2"
7'-1"
7'-9"
7'-5"
8'-6"
9'-4"
8'-8"
9'-11"
10'-11"
0'-7"
0'-8"
0'-9"
0'-10"
1'-0"
1'-2"
1'-1"
1'-4"
1'-7"
1'-6"
1'-10"
2'-2"
1'-10"
2'-4"
2'-9"
2'-4"
2'-11"
3'-5"
2'-10"
3'-6"
4'-2"
4'-1"
4'-9"
5'-1"
5'-2"
5'-7"
5'-11"
5'-11"
6'-5"
6'-9"
7'-5"
8'-6"
9'-4"
8'-11"
10'-2"
11'-3"
10'-5"
11'-11"
13'-1"
1'-1"
1'-1"
1'-2"
1'-2"
1'-3"
1'-5"
1'-4"
1'-6"
1'-8"
1'-7"
1'-9"
1'-11"
1'-10"
2'-1"
2'-4"
2'-1"
2'-5"
2'-8"
2'-4"
2'-9"
3'-2"
3'-1"
3'-7"
4'-2"
3'-10"
4'-8"
5'-0"
4'-10"
5'-5"
5'-9"
6'-3"
7'-1"
7'-10"
7'-6"
8'-6"
9'-5"
8'-8"
9'-11"
10'-11"
0'-10"
0'-11"
1'-0"
1'-0"
1'-1"
1'-2"
1'-2"
1'-4"
1'-6"
1'-5"
1'-7"
1'-9"
1'-8"
1'-11"
2'-2"
1'-11"
2'-3"
2'-7"
2'-3"
2'-7"
3'-0"
2'-11"
3'-6"
4'-1"
3'-9"
4'-7"
5'-0"
4'-9"
5'-5"
5'-9"
6'-3"
7'-2"
7'-11"
7'-6"
8'-7"
9'-6"
8'-9"
10'-0"
11'-1"
0'-8
0'-9"
0'-10"
0'-10"
0'-11"
1'-0"
1'-0"
1'-2"
1'-4"
1'-3"
1'-5"
1'-8"
1'-6"
1'-9"
2'-1"
1'-9"
2'-2"
2'-6"
2'-1"
2'-7"
3'-0"
2'-11"
3'-6"
4'-2"
3'-9"
4'-8"
5'-1"
4'-8"
5'-6"
5'-10"
6'-5"
7'-4"
8'-1"
7'-8"
8'-9"
9'-8"
8'-11"
10'-3"
11'-3"
1'-5"
1'-7"
1'-9"
2'-0"
2'-3"
2'-5"
2'-7"
2'-11"
3'-2"
3'-3"
3'-8"
4'-0"
4'-0"
4'-4"
4'-7"
4'-6"
4'-11"
5'-2"
5'-0"
5'-5"
5'-9"
6'-0"
6'-6"
6'-11"
7'-1"
7'-7"
8'-1"
8'-1"
8'-8"
9'-5"
10'-1"
11'-7"
12'-9"
12'-1"
13'-10"
15'-3"
14'-2"
16'-2"
17'-10"
0'-8"
0'-8"
0'-9"
0'-9"
0'-10"
1'-0"
0'-11"
1'-1"
1'-2"
1'-2"
1'-4"
1'-6"
1'-4"
1'-7"
1'-10"
1'-7"
1'-11"
2'-2"
1'-10"
2'-3"
2'-7"
2'-6"
3'-0"
3'-7"
3'-3"
4'-0"
4'-8"
4'-2"
5'-1"
5'-6"
6'-0"
6'-1l"
7'-7"
7'-3"
8'-3"
9'-1"
9'-5"
9'-8"
10'-7"
www.gratingpacific.com
20
H-20 TRUCK
WEIGHT LBS.
PER SQ. FT.
BEARING
BAR SIZE
1 x 1/4
1 x 5/16
1 x 3/8
1-1/4 x 1/4
1-1/4 x 5/16
1-1/4 x 3/8
1-1/2 x 1/4
1-1/2 x 5/16
1-1/2 x 3/8
1-3/4 x 1/4
1-3/4 x 5/16
1-3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2-1/4 x 1/4
2-1/4 x 5/16
2-1/4 x 3/8
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
5 x 1/4
5 x 3/8
5 x 1/2
6 x 1/4
6 x 3/8
6 x 1/2
7 x 1/4
7 x 3/8
7 x 1/2
21
H-15 TRUCK
8.9
10.8
12.8
10.8
13.3
15.7
12.8
15.7
18.7
14.8
18.2
21.6
16.7
20.6
24.5
18.7
23.1
27.5
20.7
25.6
30.4
24.6
30.6
36.4
28.6
35.5
42.3
32.5
40.4
48.2
40.4
60.0
79.3
48.4
71.8
95.0
56.3
83.5
110.6
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
SECTION
MOD. PER
FT. OF WIDTH
0.364
0.455
0.545
0.568
0.710
0.852
0.818
1.023
1.227
1.114
1.392
1.670
1.455
1.818
2.182
1.841
2.301
2.761
2.273
2.841
3.409
3.273
4.091
4.909
4.455
5.568
6.682
5.818
7.273
8.727
9.091
13.636
18.182
13.091
19.636
26.182
17.818
26.727
35.636
H-10 TRUCK
CROSS BAR
SIZE
AUTO TRAFFIC
H-20
TRUCK
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0'-6"
0'-6"
0'-7"
0'-7"
0'-8"
0'-9"
0'-9"
0'-11"
1'-0"
0'-11"
1'-1"
1'-3"
1'-2"
1'-5"
1'-7"
1'-5"
1'-8"
2'-0"
1'-8"
2'-0"
2'-4"
2'-3"
2'-9"
3'-4"
3'-0"
3'-8"
4'-5"
3'-10"
4'-9"
5'-5"
5'-11"
6'-10"
7'-6"
7'-2"
8'-2"
9'-0"
8'-4"
9'-7"
10'-6"
0'-6"
0'-7"
0'-9"
0'-9"
0'-11"
1'-1"
1'-0"
1'-3"
1'-6"
1'-4"
1'-8"
1'-11"
1'-9"
2'-1"
2'-6"
2'-2"
2'-8"
3'-2"
2'-7"
3'-3"
3'-10"
3'-9"
4'-7"
4'-11"
5'-0"
5'-5"
5'-9"
5'-9"
6'-2"
6'-7"
7'-2"
8'-3"
9'-1"
8'-8"
9'-11"
10'-11"
10'-1"
11'-8"
12'-8"
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
1'-0"
1'-1"
1'-1"
1'-2"
1'-3"
1'-4"
1'-3"
1'-5"
1'-6"
1'-6"
1'-8"
1'-10"
1'-8"
1'-11"
2'-1"
1'-11"
2'-2"
2'-6"
2'-2"
2'-6"
2'-10"
2'-9"
3'-3"
3'-9"
3'-6"
4'-2"
4'-10"
4'-4"
5'-2"
5'-6"
6'-0"
6'-10"
7'-6"
7'-2"
8'-2"
9'-0"
9'-4"
9'-6"
10'-6"
0'-10"
0'-10"
0'-11"
0'-11"
1'-0"
1'-1"
1'-1"
1'-3"
1'-4"
1'-3"
1'-6"
1'-8"
1'-6"
1'-9"
2'-0"
1'-9"
2'-0"
2'-4"
2'-0"
2'-5"
2'-9"
2'-8"
3'-2"
3'-8"
3'-5"
4'-1"
4'-10"
4'-3"
5'-2"
5'-6"
6'-0"
6'-11"
7'-7"
7'-3"
8'-3"
9'-1"
9'-5"
9'-8"
10'-7"
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
0'-7"
0'-8"
0'-9"
0'-9"
0'-10"
1'-0"
0'-11"
1'-1"
1'-3"
1'-2"
1'-4"
1'-6"
1'-4"
1'-7"
1'-10"
1'-8"
1'-11"
2'-3"
1'-11"
2'-4"
2'-8"
2'-7"
3'-2"
3'-9"
3'-5"
4'-2"
4'-11"
4'-4"
5'-4"
5'-8"
6'-2"
7'-0"
7'-9"
7'-5"
8'-5"
9'-4"
9'-7"
9'-10"
10'-10"
1'-3"
1'-6"
1'-8"
1'-10"
2'-1"
2'-3"
2'-5"
2'-9"
3'-0"
3'-1"
3'-5"
3'-9"
3'-11"
4'-2"
4'-5"
4'-4"
4'-8"
5'-0"
4'-10"
5'-3"
5'-7"
5'-10"
6'-3"
6'-8"
6'-10"
7'-4"
7'-9"
7'-9"
8'-4"
8'-11"
9'-9"
11'-2"
12'-3"
11'-8"
13'-4"
14'-8"
13'-7"
15'-7"
17'-2"
0'-7"
0'-8"
0'-9"
0'-9"
0'-10"
0'-11"
0'-11"
1'-0"
1'-1"
1'-1"
1'-3"
1'-4"
1-3"
1'-5"
1'-8"
1'-6"
1'-9"
2'-0"
1'-8"
2'-0"
2'-4"
2'-3"
2'-9"
3'-2"
2'-11"
3'-9"
4'-2"
3'-9"
4'-6"
5'-4"
5'-7"
6'-7"
7'-3"
6'-11"
7'-11"
8'-9"
8'-1"
9'-3"
10'-2"
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
H-20 TRUCK
BEARING
BAR SIZE
1 x 1/4
1 x 5/16
1 x 3/8
1-1/4 x 1/4
1-1/4 x 5/16
1-1/4 x 3/8
1-1/2 x 1/4
1-1/2 x 5/16
1-1/2 x 3/8
1-3/4 x 1/4
1-3/4 x 5/16
1-3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2-1/4 x 1/4
2-1/4 x 5/16
2-1/4 x 3/8
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/6
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
5 x 1/4
5 x 3/8
5 x 1/2
6 x 1/4
6 x 3/8
6 x 1/2
7 x 1/4
7 x 3/8
7 x 1/2
H-15 TRUCK
WEIGHT LBS.
PER SQ. FT.
6.8
8.3
9.7
8.3
10.1
11.9
9.8
12.0
14.1
11.2
13.8
16.3
12.7
15.6
18.5
14.2
17.4
20.7
15.6
19.3
22.9
18.7
23.4
27.8
21.6
27.1
32.2
24.5
30.7
36.5
30.4
45.3
59.7
36.7
54.0
71.3
42.5
62.8
82.9
H-10 TRUCK
SECTION
MOD. PER
FT. OF WIDTH
0.267
0.333
0.400
0.417
0.521
0.625
0.600
0.750
0.900
0.817
1.021
1.225
1.067
1.333
1.600
1.350
1.688
2.025
1.667
2.083
2.500
2.400
3.000
3.600
3.267
4.083
4.900
4.267
5.333
6.400
6.667
10.000
13.333
9.600
14.400
19.200
13.067
19.600
26.133
CROSS BAR
SIZE
AUTO TRAFFIC
H-20
TRUCK
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0'-5"
0'-6"
0'-6"
0'-6"
0'-7
0'-8"
0'-8"
0'-9"
0'-10"
0'-10"
0'-11"
1'-1"
1'-0"
1'-2"
1'-4"
1'-2"
1'-5"
1'-8"
1'-5"
1'-8"
2'-0"
1'-11"
2'-4"
2'-9"
2'-6"
3'-1"
3'-7"
3'-2"
3'-11"
4'-8"
4'-10"
6'-4"
7'-0"
6'-8"
7'-7"
8'-5"
7'-9"
8'-11"
9'-9"
0'-6"
0'-7"
0'-8"
0'-8"
0'-9"
0'-11"
0'-11"
1'-1"
1'-3"
1'-2"
1'-5"
1'-8"
1'-6"
1'-10"
2'-2"
1'-10"
2'-3"
2'-8"
2'-3"
2'-9"
3'-3"
3'-2"
3'-11"
4'-8"
4'-3"
5'-1"
5'-5"
5'-5"
5'-10"
6'-3"
6'-9"
7'-9"
8'-7"
8'-2"
9'-4"
10'-3"
9'-6"
10'-11"
12'-0"
1'-0"
1'-0"
1'-1"
1'-1"
1'-1"
1'-2"
1'-2"
1'-3"
1'-4"
1'-4"
1'-5"
1'-7"
1'-6"
1'-8"
1'-10"
1'-8"
1'-10"
2'-1"
1'-10"
2'-1"
2'-5"
2'-4"
2'-8"
3'-1"
2'-10"
3'-5"
3'-11"
3'-6"
4'-2"
4'-10"
5'-0"
6'-3"
6'-10"
6'-7"
7'-6"
8'-3"
7'-7"
8'-9"
9'-7"
0'-9"
0'-10"
0'-10"
0'-10"
0'-11"
1'-0"
1'-0"
1'-1"
1'-2"
1'-2"
1'-3"
1'-5"
1'-4"
1'-6"
1'-8"
1'-6"
1'-9"
1'-11"
1'-8"
2'-0"
2'-3"
2'-2"
2'-7"
3'-0"
2'-9"
3'-4"
3'-10"
3'-5"
4'-2"
4'-10"
5'-0"
6'-4"
6'-11"
6'-8"
7'-7"
8'-4"
7'-9"
8'-10"
9'-9"
0'-7"
0'-7"
0'-8"
0'-8"
0'-9"
0'-10"
0'-10"
0'-11"
1'-0"
1'-0"
1'-2"
1'-3"
1'-2"
1'-4"
1'-7"
1'-4"
1'-7"
1'-10"
1'-7"
1'-11"
2'-3"
2'-2"
2'-7"
3'-0"
2'-9"
3'-4"
4'-0"
3'-6"
4'-4"
5'-1"
5'-3"
6'-6"
7'-2"
6'-10"
7'-10"
8'-7"
8'-0"
9'-1"
10'-0"
1'-1"
1'-3"
1'-6"
1'-6"
1'-10"
2'-1"
2'-1"
2'-5"
2'-8"
2'-8"
3'-1"
3'-5"
3'-5"
3'-11"
4'-1"
4'-1"
4'-4"
4'-8"
4'-6"
4'-10"
5'-2"
5'-5"
5'-10"
6'-2"
6'-4"
6'-10"
7'-3"
7'-3"
7'-9"
8'-3"
9'-0"
10'-4"
11'-5"
10'-10"
12'-5"
13'-8"
12'-8"
14'-6"
15'-11"
0'-7"
0'-7"
0'-8"
0'-8"
0'-9"
0'-10"
0'-9"
0'-10"
1'-0"
0'-11"
1'-0"
1'-2"
1'-1"
1'-3"
1'-5"
1'-3"
1'-5"
1'-8"
1'-5"
1'-8"
1'-11"
1'-11"
2'-3"
2'-7"
2'-5"
2'-11"
3'-5"
3'-0"
3'-8"
4'-4"
4'-6"
6'-1"
6'-9"
6'-5"
7'-4"
8'-1"
7'-6"
8'-7"
9'-5"
www.gratingpacific.com
22
H-20 TRUCK
BEARING
BAR SIZE
1 x 1/4
1 x 5/16
1 x 3/8
1-1/4 x 1/4
1-1/4 x 5/16
1-1/4 x 3/8
1-1/2 x 1/4
1-1/2 x 5/16
1-1/2 x 3/8
1-3/4 x 1/4
1-3/4 x 5/16
1-3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2-1/4 x 1/4
2-1/4 x 5/16
2-1/4 x 3/8
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
5 x 1/4
5 x 3/8
5 x 1/2
6 x 1/4
6 x 3/8
6 x 1/2
7 x 1/4
7 x 3/8
7 x 1/2
23
H-15 TRUCK
WEIGHT LBS.
PER SQ. FT.
5.7
6.8
8.0
6.8
8.3
9.7
8.0
9.8
11.5
9.2
11.2
13.2
10.4
12.7
15.0
11.5
14.1
16.7
12.7
15.6
18.5
15.2
19.1
22.5
17.5
22.0
26.0
19.9
24.9
29.5
24.5
36.5
48.0
29.6
43.5
57.3
34.3
50.5
66.6
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
SECTION
MOD. PER
FT. OF WIDTH
0.211
0.263
0.316
0.329
0.411
0.493
0.474
0.592
0.711
0.645
0.806
0.967
0.842
1.053
1.263
1.066
1.332
1.599
1.316
1.645
1.974
1.895
2.368
2.842
2.579
3.224
3.868
3.368
4.211
5.053
5.263
7.895
10.526
7.579
11.368
15.158
10.316
15.474
20.632
H-10 TRUCK
CROSS BAR
SIZE
AUTO TRAFFIC
H-20
TRUCK
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0'-5"
0'-5"
0'-6"
0'-6"
0'-7"
0'-7"
0'-7"
0'-8"
0'-9"
0'-9"
0'-10"
1'-0"
0'-11"
1'-0"
1'-2"
1'-1"
1'-3"
1'-5"
1'-3"
1'-6"
1'-9"
1'-8"
2'-0"
2'-5"
2'-2"
2'-8"
3'-2"
2'-9"
3'-5"
4'-0"
4'-2"
6'-0"
6'-8"
5'-11"
7'-3"
8'-0"
7'-5"
8'-5"
9'-4"
0'-5"
0'-6"
0'-7"
0'-7"
0'-9"
0'-10"
0'-10"
1'-0"
1'-2"
1'-0"
1'-3"
1'-6"
1'-4"
1'-7"
1'-11"
1'-8"
2'-0"
2'-5"
2'-0"
2'-6"
2'-11"
2'-10"
3'-6"
4'-2"
3'-9"
4'-8"
5'-3"
4'-11"
5'-7"
6'-0"
6'-6"
7'-6"
8'-3"
7'-10"
9'-0"
9'-11"
9'-2"
10'-6"
11'-7"
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
0'-11"
1'-0"
1'-0"
1'-0"
1'-1"
1'-1"
1'-1"
1'-2"
1'-3"
1'-3"
1'-4"
1'-5"
1'-4"
1'-6"
1'-8"
1'-6"
1'-8"
1'-10"
1'-8"
1'-11"
2'-1"
2'-1"
2'-4"
2'-8"
2'-6"
2'-11"
3'-4"
3'-0"
3'-7"
4'-2"
4'-3"
5'-10"
6'-5"
5'-10"
7'-0"
7'-9"
7'-2"
8'-2"
9'-0"
0'-9"
0'-9"
0'-10"
0'-10"
0'-10"
0'-11"
0'-11"
1'-0"
1'-1"
1'-0"
1'-2"
1'-3"
1'-2"
1'-4"
1'-6"
1'-4"
1'-6"
1'-8"
1'-6"
1'-9"
2'-0"
1'-11"
2'-3"
2'-7"
2'-5"
2'-10"
3'-4"
2'-11"
3'-7"
4'-2"
4'-3"
5'-11"
6'-7"
5'-11"
7'-2"
7'-10"
7'-3"
8'-4"
9'-2"
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
0'-7"
0'-7"
0'-8"
0'-8"
0'-8"
0'-9"
0'-9"
0'-10"
0'-11"
0'-11"
1'-0"
1'-2"
1'-0"
1'-3"
1'-4"
1'-3"
1'-5"
1'-8"
1'-5"
1'-8"
1'-11"
1'-10"
2'-3"
2'-7"
2'-5"
2'-11"
3'-5"
3'-0"
3'-8"
4'-4"
4'-6"
6'-2"
6'-9"
6'-4"
7'-5"
8'-2"
7'-6"
8'-7"
9'-6"
1'-0"
1'-2"
1'-7"
1'-7"
1'-7"
1'-10"
1'-10"
2'-2"
2'-6"
2'-4"
2'-10"
3'-2"
3'-0"
3'-6"
3'-10"
3'-8"
4'-2"
4'-5"
4'-3"
4'-7"
4'-11"
5'-2"
5'-6"
5'-11"
6'-0"
6'-5"
6'-10"
6'-10"
7'-5"
7'-10"
8'-7"
9'-10"
10'-10"
10'-1"
11'-9"
13'-0"
12'-0"
13'-9"
15'-2"
0'-7"
0'-7"
0'-8"
0'-8"
0'-8"
0'-9"
0'-9"
0'-10"
0'-11"
0'-10"
0'-11"
1'-1"
1'-0"
1'-1"
1'-3"
1'-1"
1'-3"
1'-6"
1'-3"
1'-6"
1'-8"
1'-8"
1'-11"
2'-3"
2'-1"
2'-6"
2'-11"
2'-7"
3'-2"
3'-8"
3'-10"
5'-6"
6'-4"
5'-4"
6'-11"
7'-8"
7'-1"
8'-1"
8'-11"
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Bridge Decking
BEARING BAR
THICKNESSES
1/4", 5/16" OR 3/8"
5"
RIVET
TYPE R-37-5
FACE-TO-FACE 2-5/16
RECTICULINE BAR
3/16" X 1-1/2"
H-20 TRUCK
BEARING
BAR SIZE
2-1/2 x 1/4
2-1/2 x 5/16
2-1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3-1/2 x 1/4
3-1/2 x 5/16
3-1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
5 x 1/4
5 x 5/16
5 x 3/8
H-15 TRUCK
RECTICULINE
BAR SIZE
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
H-10 TRUCK
WEIGHT LBS.
PER SQ. FT.
17.1
19.3
21.2
19.1
21.7
24.0
21.0
24.1
26.9
23.0
26.6
29.7
25.0
31.4
35.4
AUTO TRAFFIC
SECTION MOD.
PER FT. OF
WIDTH
H-20
TRUCK
1.220
1.488
1.744
1.756
2.143
2.512
2.390
2.917
3.419
3.122
3.810
4.465
4.878
5.952
6.977
1'-6"
1'-8"
1'-10"
1'-10"
2'-1"
2'-3"
2'-2"
2'-6"
2'-9"
2'-7"
3'-0"
3'-5"
3'-8"
4'-3"
4'-10"
H-15
TRUCK
5 TON FORKLIFT
H-10
TRUCK
AUTO
TRAFFIC
3 TON FORKLIFT
5 TON
FORKLIFT
1 TON FORKLIFT
3 TON
FORKLIFT
1 TON
FORKLIFT
0'-11"
1'-1"
1'-3"
1'-3"
1'-6"
1'-8"
1'-7"
1'-11"
2'-2"
2'-0"
2'-5"
2'-9"
3'-0"
3'-7"
4'-2"
1'-3"
1'-7"
1'-9"
1'-10"
2'-2"
2'-6"
2'-5"
2'-11"
3'-5"
3'-1"
3'-9"
4'-5"
4'-9"
5'-10"
6'-9"
1'-2"
1'-4"
1'-6"
1'-6"
1'-9"
2'-0"
1'-11"
2'-3"
2'-7"
2'-4"
2'-10"
3'-2"
3'-6"
4'-2"
4'-10"
3'-4"
4'-0"
4'-4"
4'-7"
4'-11"
5'-2"
5'-4"
5'-9"
6'-1"
6'-2"
6'-7"
6'-11"
7'-8"
8'-2"
8'-8"
1'-1"
1'-2"
1'-4"
1'-4"
1'-7"
1'-9"
1'-8"
2'-0"
2'-3"
2'-1"
2'-5"
2'-9"
3'-0"
3'-7"
4'-1"
CONTINUOUS SPANS
The safe spans indicated for heavy duty gratings and bridge decking in the preceding load tables are based upon simple
span calculations. When the grating is properly anchored and the span is continuous over 3 or more supports, the above
spans may be increased by a multiple of 1.20.
www.gratingpacific.com
24
Embed Frames
TYPE L
TRENCH FRAME
Grating Pacific E-Z Pour frames are designed to expedite forming and provide
superior concrete embedment. Assembled with continuous anchors on the nonbearing sides, E-Z Pour frames install quickly and provide superior drainage.
(specify dimension)
(specify dimension)
Grating Span
(specify dimension)
Grating Span
(specify dimension)
TYPE L FRAME
"S" Clear Opening
E-Z POUR
FRAME
All frames are available in four sided, one piece welded construction units and
can accommodate any clear opening. Simply specify the frame type from the sections below, the desired clear opening, and the desired grating or cover thickness.
FRAME SECTIONS
AB
Ad
Ad
At
TYPE "E-Z"
TYPE "L"
TYPE "Z"
TYPE "M"
TYPE "X"
TYPE "P"
ANCHORS
FINISHES
25
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
Anchor
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Embed Frames
FRAME SPECIFICATIONS
The following table indicates fabricated dimensions for Steel Embed Frames presented on Page 25. Embed frames manufactured from stainless steel
or aluminum are similarly available, but will vary dimensionally. Consult manufacturer for dimensions if critical.
MODEL
NUMBER
"d"
"B"
MODEL
NUMBER
"d"
"B"
MODEL
NUMBER
"d"
"B"
"Ad"
MODEL
NUMBER
"d"
"B"
"AB"
"Ad"
EZ-75
EZ-100
EZ-125
EZ-150
EZ-175
EZ-200
EZ-225
EZ-250
EZ-300
EZ-350
EZ-400
EZ-500
EZ-600
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
3-1/2"
4"
5"
6"
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
3-1/4"
3-1/4"
L-75
L-100
L-125
L-150
L-175
L-200
L-225
L-250
L-300
L-350
L-400
L-500
L-600
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
3-1/2"
4"
5"
6"
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-3/4"
2-3/4"
2-3/4"
3-1/4"
3-1/4"
Z-75
Z-100
Z-125
Z-150
Z-175
Z-200
Z-225
Z-250
Z-300
Z-350
Z-400
Z-500
Z-600
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
3-1/2"
4"
5"
6"
1"
1-1/4"
1-1/2"
1-1/2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
1-1/2"
1-3/4"
2"
2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3-1/2"
3-1/2"
3-1/2"
M-75
M-100
M-125
M-150
M-175
M-200
M-225
M-250
M-300
M-350
M-400
M-500
M-600
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
3-1/2"
4"
5"
6"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"
2"
2"
3"
3"
3-1/2"
3-1/2"
3/4"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2"
2"
2"
2-1/2"
3"
3"
3-1/2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2-1/2"
2-1/2"
3"
3"
MODEL
NUMBER
"B"
"D"
MODEL
NUMBER
"B"
"D"
MODEL
NUMBER
"B"
"D"
MODEL
NUMBER
"t"
"B"
"At"
X-100
X-125
X-150
X-175
X-200
X-250
X-300
X-350
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
3-1/2"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/2"
3"
3-1/2"
X-400
X-500
X-600
X-2515
X-2520
X-3020
X-3025
X-3525
4"
5"
6"
2-1/2"
2-1/2"
3"
3"
3-1/2"
4"
5"
6"
1-1/2"
2"
2"
2-1/2"
2-1/2"
X-3530
X-4030
X-5030
X-5035
X-6035
X-6040
3-1/2"
4"
5"
5"
6"
6"
3"
3"
3"
3-1/2"
3-1/2"
4"
P-125
P-188
P-250
P-313
P-375
P-500
P-625
P-750
P-1000
1/8"
3/16"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
1"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
2-1/2"
2-1/2"
2-1/2"
CUSTOM SETS
If the standard sets shown on pages 27-30 do not adequately address your specific application in either load
capacity or appearance, please contact our engineering
department. We will gladly assist in the selection of an
appropriate alternative from our wide range of versatile
products.
www.gratingpacific.com
26
STANDARD DUTY
TYPE "S"
TYPE "SA"
TYPE "SP"
Type " S P " grates also comply with ADA spacing requirements. Additionally, the 1/4" maximum clear opening
between the bars make these grates desirable in areas subject
to pedestrian traffic where high heeled shoes are common.
TYPE "H"
TYPE "HA"
TYPE "HP"
HEAVY DUTY
BOLTED GRATES
Grating Pacific Trench Systems and Inlet Sets are manufactured as component products with the grates easily removed
for clearing debris from the trenches or inlets. Often security concerns or traffic conditions dictate that the grates must be
bolted to the framing. When this option is specified, weld lugs or counter-sunk lands (illustrated on page 31) are installed
on the grates and the bolt is installed below the traffic surface of the grating. For high security applications, bolted grates
with tamper-resistant fasteners may be further specified.
BOLTED
GRATES
27
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
TAMPER
RESISTANT
BOLT
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
CLOSE
MESH
BOLTING
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
TH - 12 - EZ (B)
"T" indicates trench grating
while "H" indicates type H
Heavy Duty grating as shown
on page 27. For Standard
Duty, specify "TS" etc.
Indicates trench
clear span or "S"
dimension in
inches.
Indicates type of
frame from options
illustrated on
page 25.
Optional component to
specify bolted grates. If
bolted grates are not
required, this component
is eliminated.
"S"
TS-6-EZ
TS-8-EZ
TS-10-EZ
TS-12-EZ
TS-14-EZ
TS-16-EZ
TS-18-EZ
TS-20-EZ
TS-22-EZ
TS-24-EZ
TS-27-EZ
TS-30-EZ
TS-33-EZ
TS-36-EZ
TS-42-EZ
TS-48-EZ
TS-54-EZ
TS-60-EZ
TS-66-EZ
TS-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
HEAVY DUTY
"d"
MODEL
NUMBER
"S"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/2"
1-3/4"
1-3/4"
2"
TSA-6-EZ
TSA-8-EZ
TSA-10-EZ
TSA-12-EZ
TSA-14-EZ
TSA-16-EZ
TSA-18-EZ
TSA-20-EZ
TSA-22-EZ
TSA-24-EZ
TSA-27-EZ
TSA-30-EZ
TSA-33-EZ
TSA-36-EZ
TSA-42-EZ
TSA-48-EZ
TSA-54-EZ
TSA-60-EZ
TSA-66-EZ
TSA-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
"d"
MODEL
NUMBER
"S"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
TSP-6-EZ
TSP-8-EZ
TSP-10-EZ
TSP-12-EZ
TSP-14-EZ
TSP-16-EZ
TSP-18-EZ
TSP-20-EZ
TSP-22-EZ
TSP-24-EZ
TSP-27-EZ
TSP-30-EZ
TSP-33-EZ
TSP-36-EZ
TSP-42-EZ
TSP-48-EZ
TSP-54-EZ
TSP-60-EZ
TSP-66-EZ
TSP-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
"d"
MODEL
NUMBER
"S"
"d"
MODEL
NUMBER
"S"
"d"
MODEL
NUMBER
"S"
"d"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
TH-6-EZ
TH-8-EZ
TH-10-EZ
TH-12-EZ
TH-14-EZ
TH-16-EZ
TH-18-EZ
TH-20-EZ
TH-22-EZ
TH-24-EZ
TH-27-EZ
TH-30-EZ
TH-33-EZ
TH-36-EZ
TH-42-EZ
TH-48-EZ
TH-54-EZ
TH-60-EZ
TH-66-EZ
TH-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/2"
3"
3"
3"
3-1/2"
3-1/2"
4"
4"
5"
5"
THA-6-EZ
THA-8-EZ
THA-10-EZ
THA-12-EZ
THA-14-EZ
THA-16-EZ
THA-18-EZ
THA-20-EZ
THA-22-EZ
THA-24-EZ
THA-27-EZ
THA-30-EZ
THA-33-EZ
THA-36-EZ
THA-42-EZ
THA-48-EZ
THA-54-EZ
THA-60-EZ
THA-66-EZ
THA-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3-1/2"
3-1/2"
4"
4"
4"
THP-6-EZ
THP-8-EZ
THP-10-EZ
THP-12-EZ
THP-14-EZ
THP-16-EZ
THP-18-EZ
THP-20-EZ
THP-22-EZ
THP-24-EZ
THP-27-EZ
THP-30-EZ
THP-33-EZ
THP-36-EZ
THP-42-EZ
THP-48-EZ
THP-54-EZ
THP-60-EZ
THP-66-EZ
THP-72-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
33"
36"
42"
48"
54"
60"
66"
72"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/2"
2-1/2"
2-1/2"
3"
3"
3"
3-1/2"
3-1/2"
4"
www.gratingpacific.com
28
HOW TO SPECIFY
Inlet grates and frames are specified by component model numbers. Simply follow the sample specification below.
H - 3624 - EZ (B)
Grating type from
table on page 27.
29
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Inlet Sets
STANDARD DUTY
MODEL
NUMBER
S-0606-EZ
S-0808-EZ
S-1010-EZ
S-1212-EZ
S-1414-EZ
S-1616-EZ
S-1818-EZ
S-2020-EZ
S-2222-EZ
S-2424-EZ
S-2727-EZ
S-3030-EZ
MODEL
NUMBER
S-1206-EZ
S-1210-EZ
S-1806-EZ
S-1812-EZ
S-2406-EZ
S-2412-EZ
S-2418-EZ
S-3006-EZ
S-3012-EZ
S-3018-EZ
S-3024-EZ
S-3606-EZ
S-3612-EZ
S-3618-EZ
S-3624-EZ
S-3630-EZ
S-4812-EZ
S-4818-EZ
S-4824-EZ
S-4836-EZ
S-6012-EZ
S-6018-EZ
S-6024-EZ
S-6036-EZ
S-6048-EZ
S-7212-EZ
S-7218-EZ
S-7224-EZ
S-7236-EZ
S-7248-EZ
S-8412-EZ
S-8424-EZ
S-8436-EZ
S-8448-EZ
S-9612-EZ
S-9624-EZ
S-9636-EZ
S-9648-EZ
S-9672-EZ
HEAVY DUTY
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
S-3333-EZ
S-3636-EZ
S-4242-EZ
S-4848-EZ
S-5454-EZ
S-6060-EZ
S-6666-EZ
S-7272-EZ
S-7878-EZ
S-8484-EZ
S-9696-EZ
33"
36"
42"
48"
54"
60"
66"
72"
78"
84"
96"
"S"
"d"
MODEL
NUMBER
33"
36"
42"
48"
54"
60"
66"
72"
78"
84"
96"
1"
1"
1"
1-1/4"
1-1/2"
1-3/4"
1-3/4"
2"
2-1/4"
2-1/2"
2-1/2"
H-0606-EZ
H-0808-EZ
H-1010-EZ
H-1212-EZ
H-1414-EZ
H-1616-EZ
H-1818-EZ
H-2020-EZ
H-2222-EZ
H-2424-EZ
H-2727-EZ
H-3030-EZ
"S"
"d"
12"
18"
24"
30"
36"
18"
24"
30"
36"
48"
24"
30"
36"
42"
48"
30"
36"
42"
48"
54"
60"
36"
42"
48"
54"
60"
72"
42"
48"
54"
60"
48"
54"
60"
54"
60"
72"
72"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1-1/4"
1"
1"
1"
1"
1-1/4"
1"
1"
1"
1-1/4"
1-1/2"
1-3/4"
1"
1"
1-1/4"
1-1/2"
1-3/4"
2"
1"
1-1/4"
1-1/2"
1-3/4"
1-1/4"
1-1/2"
1-3/4"
1-1/2"
1-3/4"
2"
2"
MODEL
NUMBER
H-1206-EZ
H-1210-EZ
H-1806-EZ
H-1812-EZ
H-2406-EZ
H-2412-EZ
H-2418-EZ
H-3006-EZ
H-3012-EZ
H-3018-EZ
H-3024-EZ
H-3606-EZ
H-3612-EZ
H-3618-EZ
H-3624-EZ
H-3630-EZ
H-4812-EZ
H-4818-EZ
H-4824-EZ
H-4836-EZ
H-6012-EZ
H-6018-EZ
H-6024-EZ
H-6036-EZ
H-6048-EZ
H-7212-EZ
H-7218-EZ
H-7224-EZ
H-7236-EZ
H-7248-EZ
H-8412-EZ
H-8424-EZ
H-8436-EZ
H-8448-EZ
H-9612-EZ
H-9624-EZ
H-9636-EZ
H-9648-EZ
H-9672-EZ
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
27"
30"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-3/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/4"
2-1/2"
3"
H-3333-EZ
H-3636-EZ
H-4242-EZ
H-4848-EZ
H-5454-EZ
H-6060-EZ
H-6666-EZ
H-7272-EZ
H-7878-EZ
H-8484-EZ
H-9696-EZ
33"
36"
42"
48"
54"
60"
66"
72"
78"
84"
96"
"S"
"d"
33"
36"
42"
48"
54"
60"
66"
72"
78"
84"
96"
3"
3"
3-1/2"
3-1/2"
4"
4"
5"
5"
5"
6"
6"
"S"
"d"
12"
18"
24"
30"
36"
18"
24"
30"
36"
48"
24"
30"
36"
42"
48"
30"
36"
42"
48"
54"
60"
36"
42"
48"
54"
60"
72"
42"
48"
54"
60"
48"
54"
60"
54"
60"
72"
72"
1-1/2"
2-1/4"
2-1/4"
3"
3"
2-1/4"
2-1/4"
3"
3"
3-1/2"
2-1/4"
3"
3"
3-1/2"
3-1/2"
3"
3"
3-1/2"
3-1/2"
4"
4"
3"
3-1/2"
3-1/2"
4"
4"
5"
3-1/2"
3-1/2"
4"
4"
3-1/2"
4"
4"
4"
4"
5"
5"
Any of the above Inlet Sets can be customized to meet the specific needs of your construction project. To select Standard Duty ADA conforming or close mesh gratings, simply substiH A " or " H P. " To select alternative frame construction,
tute " S A " or " S P " in lieu of the " S " component in the model number. Heavy Duty models can be similarly modified by inserting "H
select the type from page 25 and replace component " E Z " in the model number. Bolted grates must be specified by adding the " ( B ) " suffix to the model number.
www.gratingpacific.com
30
Bearing
Bars
"
16
"
SADDLE CLIP
WELD LUG
3
16
4
Welds at ends of bearing bar
appoximately 6 inches from
each side of panel.
"
"
COUNTER-SUNK LAND
WITH FLAT HEAD SCREW
"G" CLIP
"
"
"
"
16
"
16
"
(NOTE: WELD ONE SIDE AT TOP OF BEARING BAR OPPOSITE SIDE AT BOTTOM)
TRENCH BANDING
31
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
P a n e l Wi d t h s & L a y o u t
PANEL WIDTHS
Grating panels are manufactured in nominal 24" and 36" standard widths. When considering alternative widths, consult the
table below to select widths that will maintain consistent out-to-out spacing of the bearing bars. Widths specified which deviate
from the table below can be fabricated utilizing side banding. In so doing, the outside bearing bar spacing on one side of the finished panel will deviate from the spacing throughout the rest of the panel.
6-1/8"
7-5/16"
8-1/2"
9-11/16"
10-7/8"
12-1/16"
13-1/4"
14-7/16"
15-5/8"
16-13/16"
18"
19-3/16"
20-3/8"
21-9/16"
22-3/4"
23-15/16"
25-1/8"
26-5/16"
27-1/2"
28-11/16"
4-7/8"
5-13/16"
6-3/4"
7-11/16"
8-5/8"
9-9/16"
10-1/2"
11-7/16"
12-3/8"
13-5/16"
14-1/4"
15-3/16"
16-1/8"
17-1/16"
18"
18-15/16"
19-7/8"
20-13/16"
21-3/4"
22-11/16"
3-5/8"
4-5/16"
5"
5-11/16"
6-3/8"
7-1/16"
7-3/4"
8-7/16"
9-1/8"
9-13/16"
10-1/2"
11-3/16"
11-7/8"
12-9/16"
13-1/4"
13-15/16"
14-5/8"
15-5/16"
16"
16-11/16"
29-7/8"
31-1/16"
32-1/4"
33-7/16"
34-5/8"
35-13/16"
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
53
83
SHADED
AREAS
INDICATE
STOCK
PANEL
WIDTHS
23-5/8"
24-9/16"
25-1/2"
26-7/16"
27-3/8"
28-5/16"
29-1/4"
30-3/16"
31-1/8"
32-1/16"
33"
33-15/16"
34-7/8"
35-13/16"
17-3/8"
18-1/16"
18-3/4"
19-7/16"
20-1/8"
20-13/16"
21-1/2"
22-3/16"
22-7/8"
23-9/16"
24-1/4"
24-15/16"
25-5/8"
26-5/16"
27"
27-11/16"
28-3/8"
35-15/16"
7/16" O.C.
11-1/8"
11-9/16"
12"
12-7/16"
12-7/8"
13-5/16"
13-3/4"
14-3/16"
14-5/8"
15-1/16"
15-1/2"
15-15/16"
16-3/8"
16-13/16"
17-1/4"
17-11/16"
18-1/8"
18-9/16"
36-1/16"
WIDTHS SHOWN ARE FOR 3/16" THICK BEARING BARS. FOR 1/8" BEARING BARS, DEDUCT 1/16" FROM THE VALUES INDICATED.
PANEL LAYOUT
As stated above, stock grating panels are manufactured in 24" and 36" nominal widths. Stock lengths (span) are 24'-0" for all
sizes with most popular bearing bar sizes also available in 20'-0" lengths. These sizes allow for efficient layout and waste minimization when they are fabricated to your exact specification.
Unlike many competing products, individual grating panels do not require supports on all four sides of each cut piece. Bar grating panels only require support perpendicular to the bearing bar span. There is no need to place supports parallel to the bearing
bars where adjacent panels are installed in succession.
The following layouts illustrate proper layout and support of a simple bar grating platform.
"
"
16
Span
4'-0"
"
16
8'-0"
2315 16"
Supports
4'-0"
"
16
2315
3513
"
16
Bearing Bar
3513
Support
Support
www.gratingpacific.com
32
"
1
+
32"
O.C.
"
"
16
"
"
16
Bearing Bars
"
Cross Bars
D+
"
D'
=
1
+
4 " C-C End Cross Bars in
5'-0" Length
Length +
LONGITUDINAL BOW
TRANSVERSE BOW
W' = W +
"
1/200 of Length
Bearing Bars
Bearing Bars
"
12"
12
D
11 4 "
"
Length + 0"
INSTALLATION CLEARANCES
1
"
"
"
"
Panel Lengths
"
"
Panel Lengths
PANEL CLEARANCES
Thickness of Seat
Angle or 1/4" Min.
1
1
"
"
Panel Width
"
" Max.
Panel Width
CIRCULAR CUTS
1
8
"
"
1 @ 12
"
Actual Cut-Out Width
33
PHOENIX, AZ
TEL (888) 936-9201
FAX (623) 936-9550
L O S A L A M I T O S, C A
TEL (800) 321-4314
FAX (562) 598-2740
T R A C Y, C A
TEL (800) 491-7999
FAX (209) 832-6311
WOODBURN, OR
TEL (800) 942-4041
FAX (503) 980-2068
S E AT T L E , WA
TEL (800) 243-3939
FAX (206) 575-6455
Additional Products
GRIP STRUT
SAFETY GRATING
WIRE CLOTH
EXPANDED METALS
PERFORATED METALS
FIBERGRATE TM MOLDED
FIBERGLASS GRATING
TRACTION TREAD TM
GRATINGS & FLAT SHEET
ACO TRENCH
DRAIN SYSTEMS
ALGRIP
FLOOR PLATE
R & B WAGNER
HANDRAIL FITTINGS
PULTRUDED FIBERGLASS
GRATING
EXTRUDED ALUMINUM
STAIR NOSINGS
ALUMINUM ARCHITECTURAL
GRILLES
GRATE LOCK TM
INTERLOCKING GRATING
www.gratingpacific.com
34
Phoenix, AZ
1-888-936-9201
Southern California
Los Alamitos, CA
1-800-321-4314
Central/Northern California
Trac y, C A
1-800-491-7999
Oregon
Woodburn, OR
1-800-942-4041
Washington
S e a t t l e , WA
1-800-243-3939
Also in stock:
Fiberglass Gratings
Per forated & Expanded M etals
Wire Cloth
Polymer Trench Drain Systems
Stair Nosings & Treads
R & B Wagner Handrail Fittings
Construc tion Produ c ts
S afet y Floor Plates
For more information, visit us at
www.gratingpacific.com