Professional Documents
Culture Documents
Low-Complexity Detection of Full-Rate SFBC in Bicm-Ofdm Systems
Low-Complexity Detection of Full-Rate SFBC in Bicm-Ofdm Systems
PRESENTED BY
M.RAJAGURUNATHAN(91409106046) C.RAJAA (91409106047)
ABSTRACT
Last, future generation wireless communication standards are DVB-T2 , DVB-NGH These standards supports multi-antenna transmission , reception to increase the bandwidth efficiency Our proposed method is space-frequency block codes in BICM orthogonal frequency division multiplexing (OFDM) systems It enables the realistic implementation of any FRFD in any BICM-OFDM system (DVB)
OBJECTIVE
To achieve Full diversity and Spatial multiplexing To increase the MIMO channel capacity which allows a higher data rate transmission with full diversity To decrease the decoding complexity
EXISTING METHOD
Full rate codes is the existing method for MIMO decoding The drawback of full-rate codes : 1.FRC has very high decoding complexity, which grows exponentially with the number of transmitted symbols 2.FRC requires number of iterative process for decoding the transmitted signal in MIMO 3.FRC depends on the Channel condition and noise level
PROPOSED METHOD
SFBC is our proposed method SFBC is the detection algorithm, in order to decode the transmitted signal in MIMO, BICM - OFDM system Demodulated Vector is,
Y n 1 n X1 n 2 n X 2 n Z n ,
(i.e.,)
BLOCK DIAGRAM
The figure shows the transmission and reception process in MIMO, BICMOFDM system using SFBC
TOOLS USED
MATLAB 7.10 MATLAB coding tools
THANK YOU