You are on page 1of 1

INSTRUCTION MANUAL QUICK TRAK III

3.4 Display board connections The connections to the controller are made through screw-type terminal blocks on the printed circuit boards. The recommended torque for these screws is 1.95 lb-in / 0.22Nm (max wires section 1,5mm^2)

_____________________________________________________________________________________ STI s.r.l. via pascoli 10 A/B 24020Gorle (Bg) ITALY www.stistrumentazione.com Manuale 4026 - rev.0 02/2007 QT III - 17 -

You might also like