Professional Documents
Culture Documents
Manual Control Manual
Manual Control Manual
hite
hite
P1 X/Step P2 X/E mpo wer P3 Spin dle P7 Z/Ste p P9 5V/V DD P13 Y/Di r
ite
P2 C/Ste p
P3 Z/Ste p
P4 X/Dir
P7 Y/Dir
P8 Z/ Dir
P9 5V/V DD
P10 GND
P11 Estop
P12 X/Ste p
P13 Y/Ste p
P14 Spind le
P15 C/Dir
ite
P1 Emp ower P2 C/Ste p P3 Z/Ste p P7 Z/Dir P9 5V/V DD P13 D/Ste p
hite
P1 Spin dle P2 A/Di r P3 B/Dir P7 C/Dir P9 5V/V DD P13 B/Ste p
hite
P2 C/ Step P3 X/ Step P7 Spin dle P9 5V/V DD P13 Z/ Step
Instructions 1: The first drive with a corresponding docking connector board good driver board 2: turn on the power switch, power indicator light
3: Click the corresponding axis manual control buttons, the corresponding stepper motor shaft rotation axis while the corresponding indicator light, release the button to stop stepping motor 4: Manually adjust the speed dial number is about 300 degrees rotation within the (limited spaces on both sides of the fixed position), clockwise rotation acceleration, deceleration counterclockwise rotation