Professional Documents
Culture Documents
Create the basic computer model (without the pushover data) in the usual manner. Define properties for pushover hinges using Define > Section Properties > Hinge Properties menu command. The program includes several default build-in hinge properties and the user-defined properties are also available. Assign the pushover hinges to the frame elements in the model by using Assign > Frame > Hinges menu command. Define load pattern (Define > Load Patterns) that will contain the loads to be applied in the pushover analysis.
Review Results
Display > Show Static Pushover Curve enables you to plot base shear vs. monitored displacement as well as other plots. Display > Show Hinge Results enables you to plot the deformation of the hinges vs. the applied loads, such as plastic rotation of the hinge vs. moment. Use Display > Show Deformed Shape menu command to review displaced shape and a sequence of hinge formation on a step-by-step basis. Review member forces on a step-by-step basis using Display > Show Forces/Stresses > Frames/Cables menu command. Use Display > Show Plot Functions to plot various outputs (such as joint displacements, frame member forces) at each step of the pushover analysis.