You are on page 1of 172
VL-H950E SHARP SERVICE MANUAL 'SO7H2VL-HBSOS LIQUID CRYSTAL CAMCORDER Fiji EJ VL-H850S mMopvE.ts VL-H950E In the interests of user-safely (Required by safety regula- tions in some countries) the set should be restored to its original condition and only parts identical to those specified be used. ° ° z 5 m Zz S a . PART NAMES, . DISASSEMBLY OF THE SET |. MECHANISM ADJUSTMENT ADJUSTMENT OF VCR... . SYSTEM BLOCK DIAGRAM. SCHEMATIC DIAGRAMS senses |. SEMICONDUCTOR LEAD IDENTIFICATION .. PRINTED WIRING BOARD ASSEMBLIES 40.REPLACEMENT PARTS LIST .nnsinnnnnnnnsesnnnnnninnnnnninsne 11.PACKING OF THE SET 42.AC ADAPTER ... SENPAEEE VL-H850S VL-H950E 1. SPECIFICATIONS Signal System: PAL standard Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type or Hi8 MP, ME type Recording/Playback Time: 90 minutes (P5-90) Tape Speed: 20.051 mm/second Pickup Device: 1/4" (6.4mm, effective size: 4.5 mm) CCD image sensor (with approx 470,000 pixels including optical black) Lens: 16 x power zoom lens (F1.4, f=4.0-64.0 mm), full-range auto focus Lens Filter Diameter: 46 mm Monitor: 4* (10.1 cm) —full-colour LCD screen (TFT active matrix) Microphone: Electret stereo microphone Colour Temperature Compensation: Auto white balance with white balance lock Minimum illumination: 4 lux* (with gain-up) Video Output Level: 1.0 Vp-p 75-ohm unbalanced Audio Output Level: -8 dBs, impedance less than 2.2 kohms Speaker Output: 300 mW External Microphone Input: 3.5 mm diameter mini-plug, 66 dBs, output impedance 6.8 kohms, DC 4V, for plug-in-power microphone use Power Requirement: DC'3.6V Power Consumption: 6.2W (during camera recording in full auto mode with zoom motor of, backlight in normal mode, and without A/V pack) Operating Temperature: 0°C to + 40°C Operating Humidity: 30% to 80% ‘Storage Temperature: -20°C to +60°C Dimensions (approx.): 7 Ve" (W) x 4 "/o" (H) x 8 7"/s2" (D) 180 mm (W) x 114 mm (H) x 98 mm (D) Weight (approx.): 720.9 (without battery pack, lithium battery, video cassette, and lens cap) AC Adapter/Battery Charger (UADP-0206TAZZ(VL-H850S)) (UADP-0232TAZZ(VL-H950E)) Power Requirement: AC 110-240 V, 50/60 Hz DC Output: 4.5 V Power Consumption: 27 W Dimensions (approx.): 2 °Yao" (W) x2" (H) x 5 %s" (D) [75 mm (W) x51 mm (H) x 135 mm (D)] Weight (approx.): VL-H850S (UADP-0206TAZZ) : 360 g VL-H950E : For Asia/The Middle East (UADP-0232T AZZ) : 360 g For Hong Kong (UADP-0223TAZZ) : 425 g For Australia/New Zealand (UADP-0208TAZZ) : 385 g Battery Pack BT-H21 Power Requirement: AG 110-240 V, 50/60 Hz DC Output: 3.6V Dimensions (approx.): 2 V/s" (W) xa" (H) x 2 7/2" (D) [54mm (W) x 19mm (H) x56 mm (0) Weight (approx.): 0.30 Ibs (136 g) ‘Specifications are subject to change without notice. “Minimum illumination: Since there is no widely accepted testing procedure for determining minimum illuina- tion capability, lux ratings are comparable only between models from the same manufacturer. WW VL-HS50E 2. PART NAMES For details on the use of each control. Zoom lens Stereo microphone Cassette compartment door release AW pack terminal cover When the cassette compartment door is opened Lens protector Cassette holder Shoulder strap loop ANN pack mounting : panel Cassette compartment door batiory comparment The lens protector can be removed (e.g. for cleaning the lens) by rotating it in an anticlockwise direction (®) and then gently pulling it off () 24

You might also like