LESSON 21: REFRIGERANT.SIDE TROUBLESHOOTING (COOLING AIR-TO-AIR} PART 2
PaaS
Describe the differences between
troubleshooting the electrical and refrigerant
sides of a heat pump system.
‘What are flow-check pistons and how are
they used in heat pump systems?
Describe the result of falling to match the
metering orfice to the outdoor section.
When is it acceptable to size a fixed
metering orifice by driling?
When replacing a flare fitting on the
distributor body of a metering device with
fixed orifice, what level of pressure should
you apply to tighten the fitting?
When performing a leak check, you should
charge the system with dry nitrogen to a
maximum pressure of psig
‘What level of vacuum is required to ensure
that the system is property dehydrated?
RSSWEss
No single heat measurement can be used to
evaluate the performance of a refrigeration
system, The technician must consider
several measurements and compare them
to specifications for DX cooling systems to