Professional Documents
Culture Documents
SAP Finance by GBTPC
SAP Finance by GBTPC
Tax Countries Re: What is Global company 2. Define Official Withholding Tax Codes code? Have u worked on that?
3. Define Business Place (If more than one TAN No.) 4. Assign factory calendar to Business Place 5.Define W.Tax type for Invoice Posting and Payment Posting 6.Define W.Tax Code for Invoice Posting and Payment Posting 7.Check Recipient Types 8.Maintain Tax due dates 9. Maintain surcharge calculation method 10.Maintain Surcharge rates 11.Assign tax types to company code 12. Create GL Account - Withholding tax 13. Assignment of GL Account to Withhold tax 14. Maintain Document types for challan updatation 15.Maintain Number ranges group (SAP script forms) 16.Assign Number ranges to number group 17. Maintain number ranges 18. Assign TDS Number in Global Parameters 19. Assign Tax codes in Vendor Master Financial Accounting Global settings is the last step in thebasic settings configuration.Here You can see the the entire configuration of your company. Also some of the options like negative postings, business area financial statements,propose fiscal year, define default value date etc can be selected global company code is /noby6 .financial global parameter is the final step in basic 24 steps.in this step uill come 2 know breif deatails of the company likenegative posting ,proposd fical year,chart of accounts,bussiness area financial status etc. Comapany codes involved in document entry for external SAP system as sender orreceiver,they should have a global company code.this type of co. code must have a cross system code in addition to their local co. code
What is GR/IR account? Why do you maintain that? Explain the importance of GR/IR clearing account.
Normally there will be time lag between recording of Goods received and Invoice received. To track the differences at any point of time, GR/IR Account will be helpful.
or Its an offsetting a/s, where u post when goods received and invoice not received and invoice received and goods not received.
After entering a document can you delete the entry? Can you change the document? Which fields Base line date & Once you post a document u cant delete the entry, but u can payment terms. change some of the fields are 1) Value date 2) Assignment number 3) Text But remember we cant change the amount once you posted. Where as in AR & AP we can change Discount base amount, Re: what are the prerequisites for chart of depreciation and how many chart of depreciation can assined what is a One company code is assigned only one chart of depreciation a/c type? but one chart of depreciation can be assigned to many company code. what r they? where we use it?where can we find it after that? KA VENDOR Account type indicates that business transacation is related to which account type such as GL account(S),Vendor a/c(K),Customer a/c(D),Asset a/c(A) types and account types symbols. We can use this account type to post the document.In document header we use Document types such as GL account Document Types SA AB Vendor account Document types KR--- VENDOR INVOICE KZ -- VENDOR PAYAMENT DOCUMENT Customer account Document types DR--- CUSTOMER INVOICE DZ -- CUSTOMER PAYAMENT DA -- CUSTOMER DOCUMENT what is a a/c type?what r they?where we use it?where can we find it after that? Account types are used to deferanciate the documents it is useful to identify the type of documents account types are gl a/c(s) vendor(k) customer(d) asset(a) meterial(m) in each account type there are no of document types ex: account type document type 1) g/l a/c sa,ab 2) vendor kr,kz,ka 3) customer dr,dz,da 4) asset aa,af 5) meterial we,wr,re What is the difference between the functions of T-code F-22 and FB70? Kindly explain in detail window for GL to GL account entry. where as f-22 is a multiple screen transaction window for gl to any other account type entry.......
Re: what is the difference between Field Status Varient and Field Status Group. Please explain in Field Status Group are used to control the screen appearance for document posting. This is achieved through General Ledged Account by assigning field status group to General Ledger account or through posting key. For, this we need Field Status variant, which contains field status groups, and assign the field status variant to your company code. In the field status group we can manage the fields as Fields, which must have an entry, can be made required fields - Required Fields that can be entered, but are not required can be set to optional entry Optional Fields, which is not required, can be suppressed. The field status variant groups together several field status froups.Field status group specifies which fields are reqd. optional or suppressed.Field status variants are assigned to CoCodes, field status groups are assigned to field status variants.
What is the
difference between Withholding Taxes and Extended Withholding Taxes? Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount. In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount. Extended withholding tax supports both concepts. The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules in particular the percentage rate are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type. If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type. When entering a line item, you can enter withholding tax data for each of these withholding tax types. How To Configure Withholding Tax? Steps for extended withholding tax : 1. Check withholding tax countries 2. Define Ex. Withholding tax types for invoice postings 3. Define Ex. Withholding tax codes 4. Formula for Ex. Withholding tax calculation 5. Assign Ex. Withholding tax types to Company code
6. Activate Ex. Withholding tax 8. Create a G/L a/C for Ex. Withholding tax 9. Define A/C for Ex. Withholding tax (DBWW) 10. Make changes in Vendor master (XK02) 11. Maintain Company Code Settings: Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings 12. Activate country version for specific fiscal year position Path: IMG -> FA -> -> FAGS -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
cities and differentiates these cities into Business Areas... Business Areas are not much relevant in FI but are much more relevant in CO. You have given a very good example for Business Area. I have questions. If I want the B/s and P&L Account for Business Area wise, I can take it. But, How about those transactions which are not assigned any business area during the document entry. Kotni Let me first be sure of what you are asking. Is it: 1) You want the B/S and P/L statements of transactions carried out in areas other than the business areas defined by you? or 2) You only want to view the transactions that were not carried out in any business area? Whatever were your doubts, let me clarify. If your doubt was the first one, then, in that case, the financial statements will not be available. There are reasons for the same. All transactions in FI pass through G/L accounts. The data in FI is then passed to CO through primary cost elements. According to the settings that you have configured for your controlling area and operating concern, the costs are distributed to the various cost centers (Cost Center Accounting & CO-PA). The costs are then apportioned to the various cost centers (which may or may not be a part of your business areas or may be independent cost centers). Now, with this data, financial statements of the business area are drawn up. For transactions not part of business area, they are transferred to independent cost centers (e.g. like Head Office Salaries, HR, etc) and hence, cannot be drawn up as a financial statement but just as line item displays in your reconciliation ledger (if you have activated it in the CO-OM-CEL {Cost Element Accounting}) [The answer to your second doubt, I hope]. Financial statements of Business areas are unbalanced because not always does the debit and credit entries of a transaction lie in the same business area/cost center; but for cost accounting purposes, they are reasonably sufficient. Thank you for the reply. I understand I need to give more clearly about my doubt. I want to configure FI and other modules and there is no CO or operating concern. But I want Balance sheet and Profit and Loss Account for each of the business area.As you aware, the business area can be defined above or below company code level. Is it possible to get what I want. In order to generate BS and P&L at business area level you should carry out the following: 1. You should have activated " Enable BA balance sheet" under enter global parametets in FA global settings.
2. You should do configuration under the transaction code "OBXM" 3. You also have run the transaction codes f.50 for P&L and 5.d & 5.e for Balance sheet readjustment. System automatically posts the taxes and reconciliation accounts of NIL BA transactions to BA and tally the trial balance of all B. areas Your explanations were excellent and precise, but I have a quick question why would one use business area against a profit center as business area data is never precise and getting a balance sheet report via business area is not recommended. Profit center would be better just a doubt please clarify Why would I use business area against a profit center?" is a very pertinent one and conceptually necessary. Let me explain to you what a profit center exactly means, both in SAP terminology and in management accounting. In management accounting, a profit center is an area or department from where the management wants to find out the return on investment or ROI, as the accountants know it. The concept in SAP is similar as it is used by management to find out the ROI. On the other hand, business areas are just segregation of business transaction origins. So, a certain business area can have more than one profit center within it. Both have their unique uses and both have their unique features. Using the above understanding, you can easily work out where you would use business centers and where you would use profit centers. Creating and Maintain SAP Business Area You can set up several business areas for each client so that the system can assign the postings made in all company codes defined in this client. To ensure consistency in document entry, you should give business areas the same name in all company codes. Goto transaction SM30 and specify the view V_TGSB To maintain to business area click the Maintain button.
We did the same project before. What's your strategy? You`ll use the same client for the new currency, or you`ll have a brand new one. What we`ve done before was creating a brand new environtment. These were our strategies : 1. copied all the customization in a new client, no transactions and no master datas. so you`ll have the same settings with your live system. 2. created a new company code with the new currency, and copy all the customization. this step was to minimize our step in recustomization. 3. uploaded all the master datas...and started to do a new transaction. thats what we did. and fortunately our client was satisfied w our job:D The suggestion is don't do that in a live system or else you`ll have a big problem then.
7. What is field status group, what does it control? Ans: FSG is mandatory field in ! GL Creation. You use this field to define which fields are displayed when you post business transactions to a G/L account. A field may have one of the following statuses. - Suppressed - Display - Optional - Required 8. What is chart of account and how many charts of accounts can be assigned to a company? Ans: Chart of account is a list of all G/L accounts used by one or several company codes. For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a Company code. You have to assign a chart of accounts to each company code. This chart of accounts is the Operating chart of accounts and is used for the daily postings in this company code. You have the following options when using multiple company codes. You can use the same chart of accounts for all company codes If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country. In addition to the operating chart of accounts, you can use two additional charts of accounts If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries. The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the co! mpany codes which use different charts of accounts together or separately. 9. What does definition of a chart of account contains? Ans: chart of account key Name Maintenance language Length of the GL Account Number Controlling Integration Group chart of accounts (Consolidation) Block Indicator
10. Can one COA be assigned to several companies? Ans: yes. One COA can be assigned to several companies. 11) What is account group and what does it control? Ans: Account group determines which fields you can configure on the G/L master record. It is necessary to have at least two one for B/S and another one for P&L a/c. It controls the Number ranges of GL A/C. The status of fields of the master record of GL belongs to company code area. 12) What is reconciliation account; can you directly enter documents in that a/c? Ans: When you p! ost items to a subsidiary ledger, the system automatically posts the same data to the general ledger. Each subsidiary ledger has one or more reconciliation accounts in the general ledger. We cant use reconciliation account for direct postings. 13) How do you control field status of GL master records and from where do you control! Ans: Field status variant is maintained all FSGs. 14) What are the segments of GL master record? Ans: - COA Segment A/C group Nature of account Short text GL a/c long text Trading partner Group Account Number - Company code segment Account currency Tax Reconciliation a/c for a/c type OIM,LID,FSG. 15) What does Field status group assigned to a GL master record controls? Ans: It controls the account assignments that are made to the account. Specifically the field status group controls whether postings to cost centers, internal orders, profitability segments and so on are required, not allowed (suppressed), or optional. 16) What is Country and operational chart of account? Why do you use group chart of account? Ans: Operational chart of account Day to day activities It is mandatory. Country COA Its used for legal specific requirement of each country. Its additional and optional. Group COA used for consolidation of Company codes. This is for group consolidation purpose.
17) What are all the segments in a Customer/Vendor master record? Ans: Segments in Customer Segments in Vendor General Data segment General data segment Company code segment Company code segment Sales area segment Purchasing organization Segment 18) What is open line item management? What do you mean by clearing open line items? Ans: Open item management is further reconciliation function. OIM allows you to display the open and cleared items and amounts in an account. OIM should be used if an offsetting entry is made for every line item posted in the account. The a/c is reconciled and cleared against another account. Ex. Salary clearing account and GR/IR Clearing account. 19) What is residual payment and part payment? Ans: Residual payment it clears original invoice with incoming amount and create new line item for remaining outstanding amount. Partial payment it leaves the original invoice amount and creates new line item for incoming amount. 20) What is internal and external number ranges? Ans: Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical. External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may Financial Questions
Solution : * Thats generic error for payment run, check whether there are any due items as on date (tcode fbl1n). You can also change the baseline date there and rerun it. if you still get same error.. Check the proposal log, you will find the reason. * Try to see first whether any open items exist. By using FBL1N. Scenario 2: How to make the payment through automatic payment program, through F-110 .What are the prerequisites? Solution : For Down payments to be paid using APP we have create a Down Payment request F-47. Scenario 3: While doing APP, after, " the payment proposal has been created message " if edit proposal is selected, I am getting the error as "Company code ABC/ABC do no appear in the proposal " Solution : This type of error comes when your Payment proposal doesn't have any items to process. Check the parameters and ensure invoices are due as on run date. Scenario 4 : While posting customer invoice (FB70) why system asks for G/L account? As per accounting rules customer is debited and Customer reconciliation a/c is credited that ends double entry book keeping rule. Why one more G/L account on top of Recon a/c, which is posted automatically? Solution : * Entry gets posted to Customer a/c through reconciliation account. You have to give a GL a/c for revenue. Your entry would be Customer (Reconciliation a/c) To Revenue Cr Dr
* Reconciliation is a fictious entry so you cannot consider as an entry to be entered by the user. This rule is derived from the fact that 'we cannot enter/post directly to RECON account'. That is why system needs a GL account to make the account balance as zero. Manual entry could be: Customer a/c Dr To Domestic Sales a/c (Sales invoiced posted)
Recon entry is automatically made once you post this entry since you have configured your RECON in the IMG. Scenario 5 : I am unable to figure out how to attach my GL Accounts to my company code [copied chart of accounts, have my own company code, assigned my company code to the chart of accounts]. Solution : You can attach the GL Accounts by just filling the details in the company code segment of the GL A/c. Hence you can use that gl a/c for your co code. But that would be individually creating the accounts. Right?? How about creating all accounts at one shot. Create in FS00 Scenario 6 : Difference between Standard Hierarchy and Alternate Hierarchy. Solution : Standard Hierarchy is basic structure of company but alternative hierarchy is just for reporting or temporary usage. Scenario 7: I have created depreciation keys (diminishing balance) and assigned to asset classes respectively. But at the time of asset master creation the system ask for Useful Life of the asset while my understanding is that in diminishing balance method there is useful life, just percentage is defined. Solution : Useful life is required for depreciation change. Normally a company with WDV depreciation may want to write off its assets which have crossed their useful life in 2 or 3 installments. This is achieved by depreciation change, where after useful life, a new method takes over. Scenario 8 : I have some conceptual problem in Internal Order. Solution : Internal order can only take a statistical posting & cost centre shall take a true posting when the relevant internal order is defined as statistical I/O IN T. code KO01(CONTROL DATA ) tab. So while making a posting in FB50 and assigning both I/O & COST CENTRE as relevant cost object in the transaction you shall get the stated status of these 2 cost object. Scenario 9 : In fb50, in the details tab, only if I tick 'calculate tax' will the tax get calculated. Our user wants this to happen always (by default), i.e. he does not want to tick this for each transaction. Is there any setup to be done for the tax to get calculated always?
Solution : Even now you are not clear. T_Code FB50 is used for posting GL account only. I fail to understand how you can calculate tax which is generally from purchase / vendor or Sales / Customer oriented through FB50. In case of local distribution, if we forget to pay taxes on certain items and we need to pass tax entries, then such a case is needed. This can be achieved thru default parameter id for that particular user through transaction code SU3. In SU3, in Parameters Tab put "XTX" in Parameter ID column and in Parameter Value column put "X". Scenario 10 : We have an issue here where by the system is calculating the tax for an invoice with a wrong tax base amount. How do i change the tax base amount? I get the tax rates from VERTEX and they are showing right. Where does the system pull this tax base amount for an Invoice and how can I change it. Solution : Kindly check this: spro - financial accounting - f.a global setting - with holding setting - extended with holding setting -- calculation -- with holding tax type . Check your withholding tax type, go in it and chec
Ans: There is no document that is created in FI side during PO. But in controlling there can be a commitment posting to a Cost Center. The offsetting entry is posted at the time of GR. 2.What factors differentiates from one dunning level and other dunning level Ans: The most important thing that differentiates the dunning levels are the dunning texts. The dunning text defines the urgency of the dunning notice. The other things can be the dunning charges, minimum & maximum amounts etc. 3.APP There will be many banks in a house bank. If the payment should be maid from particular bank GL account. Where it is configured. Ans: There can be several accounts in the same house bank. We should assign the GL accounts exclusively at the time of creating the Bank master data and the bank accounts. Accordingly we can do the bank determination in FBZP for the individual banks and the corresponding sub accounts. Tr code for Defining bank : FI12. 4.What are various types of servers in SAP R/3? Ans: The Typical SAP landscape looks something like figure 1.4 below: 5.can anybody explain me FI-MM integartion.pl explain in detail i. Movement types: Classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer). The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated. ii. Valuation class Assignment of a material to a group of G/L accounts Along with other factors, the valuation class determines the G/L accounts that are updated as a result of a valuation-relevant transaction or event, such as a goods movement. The valuation class makes it possible to:
- Post the stock values of materials of the same material type to different G/L accounts - Post the stock values of materials of different material types to the same G/L account iii. Transaction/Event Key Key allowing the user to differentiate between the various transactions and events (such as physical inventory transactions and goods movements) that occur within the field of inventory management. The transaction/event type controls the filing/storage of documents and the assignment of document numbers. iv. Material Type Groups together materials with the same basic attributes, for example, raw materials, semifinished products, or finished products. When creating a material master record, you must assign the material to a material type. The material type you choose determines: - Whether the material is intended for a specific purpose, for example, as a configurable material or process material - Whether the material number can be assigned internally or externally - The number range from which the material number is drawn - Which screens appear and in what sequence - Which user department data you may enter - What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both Together with the plant, the material type determines the material's inventory management requirement, that is: - Whether changes in quantity are updated in the material master record - Whether changes in value are also updated in the stock accounts in financial accounting 6.Maximum no. of dunning levels are created? Ans: 9 levels maximum. 7.In how many ways APP is configured? Tr Code: FBZP 8.What is diff between AAM,Recurring entries,Sample doccument? Account Assignment Model:
A reference for document entry that provides default values for posting business transactions. An account assignment model can contain any number of G/L account items and can be changed or supplemented at any time. In contrast to sample documents, the G/L account items for account assignment models may be incomplete. Recurring Entries: A periodically recurring posting made by the recurring entry program on the basis of recurring entry original documents. The procedure is comparable with a standing order by which banks are authorized to debit rent payments, payment contributions or loan repayments. Sample Documents: Special type of reference document. Data from this document is used to create default entries on the accounting document entry screen. Unlike an accounting document, a sample document does not update transaction figures but merely serves as a data source for an accounting document. Swarajya. 1. Where to assign activity type in cost centers? OR how to link cost centers & activity types? >> There is no direct assignment. You plan the output for a cost center first in kp26. Then you've to plan the value of that cost center which you budget for a period in kp06. Planned Activity expenditure / Planned Actvty qty gives yoa planned act rate which you can use to valuate your activity confirmations in mfg ordrs. You can also define your own prices,but you have to run the price revaluation if you want to revaluate your actual activity prices. 2. For stat. key figure what is the significance of sender & receiver cost elements & cost centers? >> Stat key fig are not real account assignments. In simple traditionl terms it is the base to allocate or define praportions with which the cost is allocated. SKFs are used to calculate the debit on a receiver object. These values can be used for assessing common costs which are used by all the other cost centers. 3. How SKF works .. Kindly give me T Codes Also. >> You create & plan SKF. Create using KK01 & PLAN the parameters of SKF in KP46 SAP Tips by: Dhiraj 1. Does any one know what is Software life cycle, it was a question asked in an interview.
2. In GL master we have a option "Balance in local currency" and "Account currency". What does it mean? 3. In movement type(MM), what is value & quantity string I know it updates values and quantities in GL with mix of valuvation class, transaction key modifier and GL A/c. But how does it work when doing a mvt type? 4. In FI when doing Special GL transaction what determines the fields statues of the screen and why do we have so many screens followed by it. Is it determined by Posting Keys? is it to determine Account type for which we are using the Special GL and debit and credit? Q: Software Life Cycle, Ans: it is nothing but Road Map - five phases like, Project Preparation, Blue print, Realisation, Final preparation and Go-live support. Q: In GL master we have a option "Balance in local currency" and "Account currency".What does it mean? Ans: Account currency is that the GL account in which currency do you want to maintain. if you decided that you want maintain in company code currency, you can post any currency in that account. If not, you want to maintain separate currency for that GL then exchange rate difference will come because the conversion rate. Balance in local currency - some GL account can't be maintain on open item basis and can't in foreign currency like clearing account and discount account etc., in such case you can assign this indicator to show the balance in local currency. Q. In movement type(MM), what is value & quantity string I know it updates values and quantities in GL with mix of valuvation class, transaction key modifier and GL A/c. But how does it work when doing a mvt type? Ans: Basically, the system does not know which GL has to be updated with what. here, we are giving a direction to the system to update the data. What you said is correct, the system will update the value and qty in the material master. You would have seen some more fields also, like Movement indicator, consumption, value string and transaction event key etc., While creating a PO, the system will take the Movement type as a base, with MT, it will identify the MI(movement indicator - used to define whether it is goods movement for production order, purchase order, delivery note etc), and it will identify the consumption,( like it is assets, or consumption or sales order) and it will identify the value string ( it is must to assigned to movement type, through allocation of value string to movement type, system will automatically
identify the GL ) and it will post the entry (dr/cr)in the GL based on the transaction and event key figure which is used to determine the debit and credit entry of a GL SAP Tips by: Elangovan 4. In Field Status Group there are options like Suppress, optional, Required, Display. So that it is followed by so many screens and it is determined by posting key. Its both debit (or) (Both) credit. SAP Tips by: Bharath
Define relationship between controlling area and company code? A controlling area may include one or more company codes which must use the same operative chart of accounts as the controlling area. A Controlling Area can contain multiple company code assignments but a single company code can be assigned to only one controlling area. What is a fiscal year variant? Fiscal Year is a period of 12 months and SAP provides 4 special periods to posting adjustment Entries. Fiscal year determines posting periods. Posting periods are used to assign business transactions. Fiscal year may be year dependent or year independent. What are special periods used for? The Special periods in a fiscal year variant can be used for things like posting audit or tax adjustments to a closed fiscal year. What do you mean by year dependent in fiscal year variants? Year Dependent: the financial year is same as calendar year. Starting from 1st Jan to 31st Dec (where posting periods and the calendar months are equal) Year Independent: the financial year is different from calendar year Starting from 1st April to 31st March (where the posting period months are not equal to calendar year months) What are shortened fiscal year? When are they used? Shortened Fiscal Year: a financial year, which has less than 12 periods. What are posting periods? The Posting period variant controls which posting periods, both normal and special, are open for each company code. It is possible to have a different posting period variant for each company code in the organization. The posting period is independent of the fiscal year variant. What are document types and what are they used for? Document type is the identifier of differentt account transactions like SA for G/L,AA for Asset Accounting etc.The doc. Types controls things like type of the account that can be posted to, the number range assigned to it, and required doc header fields. How are tolerance group for employees used? Tolerance group stores Posting amount defaults. Tolerance groups are assigned to User IDs that ensures only authorized persons can make postings. What are posting keys? State the purpose of defining posting keys? Posting keys determine whether a line item entry is a debit or a credit as well as the possible field status for the transaction. Posting keys are SAP delivered. If u want changes like making additional fields optional on payment type posting keys then the best possible action is to copy the posting key that needs to be modified and then modify it. What are field status groups? Field status groups control the additional account assignments and other fields that can be posted at the line item level for a G/L account.
Answer: As many FSVs as you want can be assigned to the co code i.e. 1:n as of Co Code: FSV.
I have created Company Code and all other configuration related to the CCode. Also in MM I have created purchase order, created vendor, material etc. I couldn't activate the PO due to the following error messages in red: 1. MAINTAIN TOLERANCE LIMITS FOR TOLERANCE KEY PE ACCOUNT ASSIGNMENT 2. CONTROL INDICATORS FOR CONTROLLING AREA DO NOT EXIST. I have assigned controlling area to company code and I could see the controlling area in existance via master file and gl verification. 1. MAINTAIN TOLERANCE LIMITS FOR TOLERANCE KEY PE ACCOUNT ASSIGNMENT ----> Please follow this link --> SPRO ---> MM---> Purchasing --> Purchase Order --> Set Tolerance limits for price variance --> Here you have to set for Tolerance keys PE and SE. Just copy them from std co. code. 2. CONTROL INDICATORS FOR CONTROLLING AREA DO NOT EXIST. ----> In Controlling --> General Controlling --> Maintain Controlling Area --> Maintain Controlling Area --> Activate Components/Control Indicators --> You need to check if you want to activate the order management/activity based costing/commitment management etc. Tips by : Shrikant Deshpande, Kishore
GRIR account Dr. Vendor account Cr. 4. Payment made to Vendor Vendor A/c Dr To Bank Clearing A/c Cr. Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions. --There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as, 1. Movement Types: Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc) 2. Valuation Class: Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement. 3. Transaction/Event key: Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory. 4. Material Type: Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account. FI-SD Integration: The integration is done in T-code VKOA 1. Sales Order Created ---No Entry--2. PGI done (Goods issue)
Cost of Goods Sold Dr (Configured in OBYC GBB T-Key) To Inventory Account 3. Billing document released to Accounting Customer Account Dr. To Sales Revenue Account (ERL T-key in Pricing procedure) Note : The GL account is assigned to this ERL in VKOA 4. Payment Received Bank Clearing A/c Dr Customer A/c Cr. Points to Know : Good to understand the pricing procedure and how the different transaction keys are used like ERL, ERS etc. Tips by : Kishore, Balaji.C Through T.code Obyc, I configure the BSX Key for Inventory Material. Configure Valutiaon Class, and Valuation Modifier and Given G.L. Account Number and save. After configuration all these, what are step to configure because I have been Interviwed by this question and I don't know what are next step. Transaction code : OBYC (in easy access) In this transcation we have to specify GL account codes for material valuation created by MM consultants. The process in MM is here below: 1) Purchase Order : Tr code ME21N - here no integration required with FI 2) Goods Issue : Tr Code MIGO - here no integratinwith FI 3) Invoice Reciept - Tr Code MIRO - here when the invoice is recieved & MM process the transaction based on OBYC configuration system will generate FI document. System also generates Material document as well 4) Payment : Tr code F110 - Here also the the transcation affects FI FI-SD integation: This integration done using Tr Code VKOA. here we have to define GL account codes to Condition types. Process : 1) SD Raises Sales Order - No implication in FI 2) SD raises Delivery doc - No implication in FI 3) SD processes billing - no implication in FI
4) SD releases billing doc to FI - FI document gets generated (Tr Code VFX3) The theory of how MM activity triggers A/c posting is: Each movement type has quantity and value string, which decides what to update. Also each movement type has transaction event key (account modifier) which in turn depending upon valuation grouping code and valuation class decides which G/L account to post. The flow is as follows: Material type --> Account Category reference --> Valuation class -->Material. Movement type -->Transaction event key-->Account modifier. You have to do the configuration settings using Tr. code OBYC. Try with Tr.code OMBW to check which G/L accounts are being hit on Plant, Material and movement type. It defines the structure of G/L accounts. It is a list of G/L accounts used by one or more company codes. In that Chart of account you have to specify the length of G/L accounts. In SAP all the entries are document oriented. so from the balance sheet of any entry you can identify the root of an entry. so it's like a flow chart in computer terms. There are threee types of Chart of Account are there. 1.Operative Chart of Accounts 2.Group of Chart of Accounts 3.Country Chart of Accounts. 1.Operative Chart of Accounts is a Chart of Account you use for the company code. 2.For different chart of accounts(operative COA) for different company code, you can group the chart of account into one chart of account for internal reporting, but cross company code controlling is not possible, because of different chart of account for different company code. 3.For different country you can have different reporting system. so for different company code you can have different company code, but can have same Operative Chart of account, so cross company code controlling is possible. Tips by : Jayaraman What is the difference between standard chart of accounts and the operating chart of accounts? What is the difference between Corporate group chart of accounts, Operating chart of accounts and Group chart of accounts?
To summarise, here is the COA setup in SAP:1. Operative chart of account - It is the main chart of account assigned to each company code in OBY6. 2. Group chart of accounts - This is structured in accordance with requirements pertaining to Consolidation 3. Country-specific charts of accounts - These are structured in accordance with legal requirements of the country in question. Standard COA is a sample COAs provided by SAP. like INT, CAUS etc. You can use them as your operative COA or can create your own operative COA from these standard COA. Corporate Group COA is same as Group COA.
There is no problem to change the account number in the vendor or customer master data, that is : All Document Items that were created in the old account will be posted in the same old account when you have a payment posting, compensations, etc. All document created after the change will be posted in the new account as well as the payment postings, compensations and others. The system will separate the postings in accordance with the moment at the documents were created. You can do a test in the development client before you do the change in the production. For example :You can create a new reconciliation account because you want the G/L accounts to separate out sales. Just switched the setting in Customer Master and off you go. SAP will recognized the old account for the old postings and used the new account for any new postings. Here is the official SAP help on the subject:You should run balance sheet adjustment program after any reconciliation account change. The system performs any adjustments required due to the change of reconciliation accounts or G/L accounts. The items from the old reconciliation accounts are allocated to the new accounts. Since you cannot post to the reconciliation accounts directly, the postings are made to temporary adjustment accounts. These adjustment accounts should be displayed along with the relevant reconciliation account in the balance sheet. The postings are then reversed after the balance sheet has been created. The program for sorting the payables and receivables makes the necessary adjustments automatically. This means that you have to define the adjustment account numbers and the posting keys for these postings in the system. If you purchase and install the FI-LC Consolidation application and have bought up a previous customer or vendor (thus also taking on his/her payables and receivables), please refer to the note in the report documentation on changed reconciliation accounts. To define the account numbers, select the activity Define adjustment accounts for changed reconciliation accounts in the Accounts Receivable and Accounts Payable Implementation Guide. You should only run this program if your new reconciliation account is classified differently from the original in your FS. e.g.. AR to Intercompany accounts. It will just reclassify the
existing balance. The line items will not be transferred. If not then no need to run the program at all.
Without creating of reconciliation account, can you create vendor? What is the use of reconciliation? Customer and vendor accounts are sub ledger GL's. We will have to create two reconciliation GLs in viz. Reconciliation GL for Customer and Vendor in chart of accounts. After, while creating customer and vendor master records, we have to mention respective reconciliation GL in their company code segment details. This recon a/c will show you the net balances in GL for customer and vendor a/cs. Without creating Vendor you can still create individual GL for each customer and vendor , but then 1) Your list of GL's in chart of account will be very lengthy.
2) Duplication of work as SD/ MM people are also required to create their own list. 3) Cross company code consolidation will not be possible as the chart of accounts will be different. 4) Very difficult to keep track of individual customer/ vendor a/cs. 5) Not advisable even in real time accounting system i.e. manual book keeping. *-- Mahajan What is Reconciliation Ledger? The purpose of Recon Ledger is to display the summarized balances of cost ledger. It is a ledger used for summarized display of values that appear in more detailed form in the transaction form. It has the following functions: 1) Reconciles controlling with Financial accounting. a) The recon ledger provide the reports for monitoring the reco of CO with FI by accounts. b) It can identify & display value flows in Controlling across Company codes, functional area or business area boundaries. c) Value flows can be used in FI as a basis for summarized reco. postings. 2) Provides an overview of all costs incurred. Updation of Recon ledger can be done online or periodically. To update online, you need to activate the recon ledger. For periodical updation, proceed as follows : a) During month end, activate the recon ledger. (T Code-KALA) b) Do follow up postings. c) Deactivate the Recon ledger. (T Code-KALB). RECONCILIATION LEDGER EXAMPLE 1 When you need to drill back from the FI G/L to find which cost center was Posted to on an expense account, the reconciliation ledger is accessed. The need to have a CO to FI reconciliation process is a result of cross company Code, crossbusiness area, or cross functional area activity that may occur in the CO module. Order settlement or confirmation, cost center assessment, or other internal CO movement may initiate these postings. When costs moved internally within CO, the FI G/L is not updated because of CO use of secondary Cost elements to facilitate the postings. The first two steps in reconciliation ledger configuration are to activate the Ledger within the controlling area and assign a document type. If you have an Existing controlling area that does not have the reconciliation ledger activated. Activate the reconciliation ledger: Controlling -> Overhead Cost Controlling -> Cost and Revenue Element -> Accounting -> Reconciliation Ledger -> Activate Reconciliation Ledger (KALA) RECONCILIATION LEDGER EXAMPLE 2
A good receipt posting of Rs.100 has occurred on internal order 1, which is assigned to company code One hundred percent of the value of internal order No.1 is settled to internal order 2. Which is assigned to company code 2. A Settlement cost element is used for the settlement posting. When an order Settlement is run, internal order 1 is credited with Rs.100 and internal order 2 is debited with Rs.100. The balances of internal order 1 and internal order 2 are 0 and Rs.100, respectively. However, the balances of company code 1 and 2 remain as they were prior to settlement. The reason: settlement activity was internal to CO. No FI update occurred. To place the FI company codes back in balance, the CO-FI reconciliation posting transaction should be run. The resulting FI postings would credit company code 1 for Rs.100 and debit company code 2 for Rs.100. The internal CO activity will now have been accounted for in FI and company codes are now in balance
- Define Versions GCW1 IMG Menu Path : Financial Accounting -> Special Purpose Ledger -> Periodic Processing -> Currency Translation -> Define Versions - Set Up Exchange Rate Type OC47 IMG Menu Path : Financial Accounting -> Special Purpose Ledger Periodic Processing -> Currency Translation -> Set Up Exchange Rate Type - Create Number ranges GC04 IMG Menu Path : Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Number Ranges -> Maintain Local Number Ranges - Create Currency Translation document type GCBX IMG Menu Path : Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Maintain Valid Document Type - Create Posting period variant GCP1 IMG Menu Path : Financial Accounting -> Special Purpose Ledger -> Actual Posting -> Posting Period -> Maintain Local Posting Period SAP Tips by: Rajiv Jain
Posting is key controls - which type of accounts can be posted to - whether the line item is debit or credit - and the field status of the document line item Where as FSG (group into Field status Variant) controls only the the document line item for that account. There are only three field status options during document entry: - Suppressed - Required - Optional If both Posting key and FSV has the same field as Required and optional, system uses the link rules, takes the one which has the highest priority(in this case required). But in case of Master record Field status which is controlled by Account Group, there are 4 options of field status: - Suppressed - Display - Required - Optional Account group defines: a. length of gl account number b. no. ranges of the gl account numbers c. field status of the GL account master data in the company code segment.(which fields to appear when you create a gl account) (to control...double click on your GL account group in Screen transaction code OBD4) Posting key defines: a. whether the line item is a debit or credit b. to which type of account the amount should be posted to(ex: when you use posting key 40, you will be able to post to gl accounts. When you use Posting key 01, you will be only able to post to customer account. c. document screen layout during posting of a document. (which fields to appear in a document...double click on the posting key and select field status and make the entries as required /optional etc) Field status group defines: Document screen layout during posting of a document. (which fields to appear in a document...double click on the field status group and select fields and make the entries as required /optional etc) LOGIC: you assign field status variant to the company code, FSV is a bundle of field status groups.
ex: in FSG G001 you have made the text as required entry...you assigned the field status group g001 to cash account..so when you use cash account and try to post a document it will definitely prompt you to enter the text (text made as required.) Both FSG and PK control the same feilds in a document.There is no dominance between FSG and Posting keys..but we should know the allowed combinations.... If text is made required in PK and suppressed in FSG..the system will issue a error msg..Rules for PK...and FSG....is set incorrectly for SGTXT field. Permissable combinations: Pk FSG R/S S/R O/S R/o S/O o/r R R S O S O R = required
Cr. Cr.
Cr.
For Domestic proceurement of Capital Goods During GR Material Stock Dr. GR/IR clearing During Excise Invoice Credit Cenvat Account Dr. Cenvat On-hold Dr.
Cenvat Clearing During Invoice Verification Cenvat Clearing GR/IR Clearing Vendor Payable Subsequent of Capital Goods Cenvat Account Cenvat On-hold
For Import Procurement of Raw Material During Customs Duty Clearing invoice Custom Clearing Dr. Custom Payable During GR Material Stock Dr. GR/IR clearing During Excise Invoice Credit Cenvat Account Dr. Custom Clearing During Invoice Verification GR/IR Clearing Dr. Vendor Payable
For Excise Duty Credit of Raw Material without PO Cenvat Account Cenvat Clearing For Excise Duty Reversal through Excise JV Cenvat Clearing Cenvat Account During Excise Invoice Creation Cenvat Suspense Account Cenvat payable For TR6C Challan PLA Account Dr. PLA on hold Account During Fortnightly Utilization Cenvat payable Cenvat Account Dr. Cr. Cr. Dr. Cr. Dr. Cr. Dr. Cr.
PLA Account
Cr.
with Billing Block 08 (to check credit memo) & 09 (to check debit memo) for the sales order type CR . If it is not so you can customize the block for credit memo requests in Customizing for SD when you define the order type Sales and Distribution -> Sales -> Sales Documents -> Sales Document Header -> Define sales document types. The release of block is allowed to be removed only by the people who are authorized for it. If the amount is within acceptable limit the block is automatically released otherwise all the people assigned to this job receive a work item in their integrated inbox for release. If the complaint is not automatically blocked by the settings in Customizing, you can set a delivery or billing block manually. - Logistics -> Sales and distribution -> Sales. - Choose Order -> Change. - Enter the number of the sales document, or use a matchcode to search for it. - Choose Enter. - If all the items have been blocked, choose Select all. - If only some items should be blocked, select the corresponding items. - Choose Edit -> Fast change of... -> Delivery block or Billing block. - Enter the delivery or billing block for the header or individual items. - Choose Copy. - The system copies (or deletes) the delivery or billing block in all the selected items. - Save your document.
Here the Cost of Goods Sold is an FI entry and Inventory Account related to MM but both of them gets affected immediately when you post a PGI in SD. The updation of these entries when PGI is done is called Real Time Integration. The affect is shown in all FI, MM and SD modules once you save the entry. The configuration for the below entry is done in OBYC
1. Cost of Goods Sold Dr 100 (T-Key GBB) To Inventory Account Cr 100 (T-Key BSX) The automatic entries are posted to inventory accounts through T-keys to which GL accounts are assigned. These T-keys are assigned to movement types in MM. Please refer to T-code OMWN and OMWB for proper understanding.
At Tcode FS00 At FS00 you can see/Edit/Create a GL Master Record which is maintained by the Company Code. Where as Sample Account is not GL Master Record but it is a set of settings/rules which are easily available to create a GL Master Record (understand this point clearly) This sample account does not hold your transaction data nor you can edit or view at FS00. To use your Sample Account: 1. Go to FS00, give a GL account no (other than Sample account no ofcourse). Select create 2. Then check all fields, whether any field is filled like Currency, Open Item Management, etc *for your confirmation* (obviously every field is empty) 3. Now enter Sample Account no in Sample Account field and give Account Group. press Enter. U will get a message that "Data from changed Sample account was accepted", check data. 4. Now chek all fields again. Now u will find some fields filled with values which you have defined in Data Transfer Rules while creating Sample Account. This is the purpose of Sample account.
12. Define field status variant t.code obc4 13. Assign company code to field status variant Go to SPRO --> Financial accouting -> Global settings --> Select your company code and double click. You can see the field status
Co.code: XXXX - Select with template button G/L A/c:XXXXXX Co.Code : XXXX Account group: Administration - Select P & L Radio button Short text: Bad debts Long text: Bad debts - Select control tab button Current currency: INR - Select only local currency check box - Select line item check box, Sort key:001 Field status variant: G001 - Save Define Accounts for Reserve & Bad Debts: - OBXD SPRO / Financial Accounting / Accounts Receivables & Payables / Business transactions / Closing / Valuate / Define Accounts for Reserve & Bad debts Chart of Accounts: XXXX PROVISION METHOD XXX XXXXXX DEBIT XXX CREDIT XXX
Select rules tab button Accounts are determined based on - Select Debit/Credit check box 40/50 - Select provision method check box - Save
Special G/L Account: - FBKP Double click Special G/L Account Type Special G/L Special G/L Indicator D E Reserve Reserve for Bad debts Double click Reserve - Chart of Accounts: SAI (Enter) Account Assignment Reconciliation A/c:XXXXXX (SD) Receivable Transfer posting (Gross): - F103 Accounting / Financial Accounting / Accounts Receivable / Periodic processing / Closing / Value / Receivable transfer posting (Gross) Customer A/c:XXXXXX Provision method: XXXX Special G/L Indicator for Debit Rec: E (Reserve for bad debts) - Select create batch input session check box - Batch input session name: SAPF103 - Posting Key:09 Posting document: DA - F8 From the menu Select -> System -> Batch Input -> Session - Select batch input session: SAPF103 Select process - Select display errors only V - Select process button - Exit Batch input Reserve for bad debts (Gross): Customer A/c:XXXXXX Co.Code: XXXX G/L Account: XXXXXX Co.code: XXXX Accounts group: reserves and surplus - Select balance sheet option button Short text: Provision for Bad Debts Long text: Provision for bad debts A/c Currency: INR Rec.Accounts for account type: Customer - Select line item display check box Sort key: 031 Field status group: G067 - Save variant field there. Tell me about new G/L? Explain to me what is new G/L? General Ledger Accounting (FI-GL) (New) Description
Spl.G/L-XXXXXX
Save
The central task of G/L accounting is to provide a comprehensive picture of external accounting and accounts. Recording all business transactions (primary postings as well as settlements from internal accounting) in a software system that is fully integrated with all the other operational areas of a company ensures that the accounting data is always complete and accurate. Beyond fulfilling the legal requirements, General Ledger Accounting also fulfills other requirements for modern accounting: - Parallel Accounting General Ledger Accounting allows you to perform parallel accounting by managing several parallel ledgers for different accounting principles. - Integration of Legal and Management Reporting In General Ledger Accounting, you can perform internal management reporting in parallel with legal reporting. For this purpose, the Profit Center Accounting functions are integrated with General Ledger Accounting. Furthermore, you can generate financial statements for any dimension (such as profit center). - Segment Reporting General Ledger Accounting supports the segment reports required by the accounting principles IFRS (International Financial Reporting Standards) and US GAAP (Generally Accepted Accounting Principles). For this purpose, General Ledger Accounting contains the Segment dimension. - Cost of Sales Accounting You can perform cost of sales accounting in General Ledger Accounting. For this purpose, General Ledger Accounting contains the Functional Area dimension. Features General Ledger Accounting comprises the following functions for entering and evaluating posting data: - Choice between group level or company level - Automatic and simultaneous posting of all subledger items in the appropriate general ledger accounts (reconciliation accounts) - Simultaneous updating of the parallel general ledgers and of the cost accounting areas - Real-time evaluation of and reporting on current posting data, in the form of account displays, financial statements with different balance sheet versions, and additional analyses.
In this way, General Ledger Accounting automatically serves as a complete record of all business transactions. It is the central and up-to-date component for reporting. Individual transactions can be checked at any time in real time by displaying the original documents, line items, and monthly debits and credits at various levels such as: - Account information - Journals - Totals/transaction figures - Balance sheet/profit and loss evaluations However, SAP still offers to choose between the New GL and the old Classic GL way of accounting. There are certain limitations in the new GL and clients are adopting to the new gl concept. What is the difference between open item and open item management? Open item: open item is an item which has to be cleared with another line item. Open item management: how you want to manage all the open item in particular GL A/C. Open item management is the setting which allows the setting to maintain the open items for the particular GL account. Use of open item : Processing open items involves choosing and then activating the open items. Processing is the last step before posting a clearing document. When posting clearing documents, the system takes tolerances into account. Tolerances are acceptable payment differences. When the line item(s) you enter and the open item(s) you process have been cleared, you can post a clearing document. For example, if you enter a vendor payment for $1000, you must choose and process vendor open items that equal $1000. If your system permits a 1% tolerance, then you can clear open items with a value from $990 to $1010. When you process open items, you can: - Activate or deactivate open items - Activate or deactivate cash discount - Maintain cash discount amounts - Enter partial payments or residual items Activate the open items to be cleared.
To process open items, on the screen for selecting open items, choose Goto --> Open items. You can process open items using the following: - Menus or function keys - Commands - Mouse To clear open items with commands or with the mouse, you select and process an item in one step. Use of open item management Defining "Open Item Management" If you set the "Open item management" indicator in the master record for an account, the line items in this account is marked as open or cleared. The balance of an account with open item management is equal to the balance of the open items. General ledger accounts are kept with open item management if you need to check whether there is an offsetting posting for a given business transaction. You should use open item management for bank clearing accounts, clearing accounts for goods receipt/invoice receipt, and salary clearing accounts. Bank accounts, however, do not use open item management. If you subsequently define open item management for a G/L account, this entry only applies to the items which are posted afterwards. At the date of the change, the account must display a zero balance. Also, when canceling this indicator, the balance must be zero. You therefore have to clear the remaining open items before making the change in the master record. Open item Take an example of misc. purchases. When you purchase from vendor you pass the following entry. Dr. Material / Expenses A/c. Cr. Vendor account (if it is credit purchase) Now the vendor account is showing credit balance till you make payment to the vendor. This in SAP they call is open item. While making payment
Dr. Vendor account Cr. Cash / Bank account If once you make the payment to vendor, while making the payment to the vendor, you need to link the payment with lying open item of above purchase. System automatically changes the status of above open item (red colour ball) to cleared item (green colour ball) in the vendor account. Where do u give a link between operating and country chart of accounts?
We have to create country chart of accounts same as we create operating chart of accounts and we have to link between this two in ob62 then afeter we have creat gls at country coa level gls after that while creation of gl account in control tab you can find on field called alternative accout number there u need assign so that parallel posting will happen to both gls if you take report
in f.01 you can see gl,and alternative gl wise balances WHAT Z SPECIAL G/L TRANSACTIONS
special g/l transaction are in which advance payments are involved.We use spl.g/l indicator for making any splg/l transacion. eg.for making adv.to vendor we use 'A' as sp.g/l indicator Hi, Special ledger Transactions are sub-ledger includes 1) Advances 2) Bills of Exchanges 3) Guarantees. eg: for Advance to vendor we use 'A' as sp.g/l indicator. eg: for Bill of exchange we use 'W' as sp.g/l indicator.