Professional Documents
Culture Documents
Nrel Phase Vi With MRF
Nrel Phase Vi With MRF
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Boundary Condition
Inlet velocity=10.3m/s
Solver Details
Pressure- Based Steady state K-omega-sst solver and Spalart Almaras Turbulence Model is used At first the solution was run with first order momentum till 1500 iteration, then it was changed to 2nd order momentum (As instructed by Dr. Ali)
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Cp comparison at r/R=0.3
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Cp comparison at r/R=0.633
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Cp comparison at r/R=0.95
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
Remarks
As it can be seen that Cp distribution pattern is computed similar to the experimental results. However there is considerable amount of deviation from the experimental Cp value near the blade tip. I am now running the solution for 2 more cases with 15.2m/s and 6.3 m/s
Structural Dynamics and Computer Applied Engineering (SDCAE) Lab. Gyeongsang National University (GNU), South Korea
10