Professional Documents
Culture Documents
ESwitching PT Practice SBA FINAL
ESwitching PT Practice SBA FINAL
A few things to keep in mind while completing this activity: 1. Do not use the browser Back button or close or reload any exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work.
Introduction
In this practice Packet Tracer Skills Exam, you will: configure VLANs using VTP configure inter-VLAN routing modify STP configure port security add a wireless LAN
Addressing Table
Device Interface Fa0/0.10 Fa0/0.20 Router1 Fa0/0.43 Fa0/0.67 Internet WRS Wireless SW_DS1 SW_AC2 SW_AC3 PC1 PC2 PC3 PC4 VLAN 43 VLAN 43 VLAN 43 NIC NIC NIC NIC 172.16.100.1 172.16.43.11 172.16.43.12 172.16.43.13 172.16.10.10 172.16.20.10 172.16.10.11 DHCP assigned 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 n/a 172.16.43.1 172.16.43.1 172.16.43.1 172.16.10.1 172.16.20.1 172.16.10.1 172.16.100.1 172.16.43.1 172.16.67.1 172.16.67.10 255.255.255.0 255.255.255.0 255.255.255.0 n/a n/a 172.16.67.1 Address 172.16.10.1 172.16.20.1 Subnet Mask 255.255.255.0 255.255.255.0 Default Gateway n/a n/a
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches: Configure static trunking. Assign VLAN 43 as the native VLAN.
b. Create and name the following VLANs on SW_DS1. VLAN 10: Student VLAN 20: Faculty VLAN 43: Management VLAN 67: Wireless
c. Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTP domain. d. Verify that VTP is operational.
a. Configure access ports on access layer switches. Configure the appropriate interfaces on SW_AC2 and SW_AC3 for access mode. Assign VLANs according to the port assignments table.
b. Configure wireless security. Set the SSID to WRS_LAN. Enable WEP security and use 12345ABCDE as key1.
c. Use cisco123 as the remote management password. d. Configure PC4 to access the wireless network that is provided by WRS. PC4 uses DHCP to obtain addressing information. Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.