Professional Documents
Culture Documents
Condenser Relief Calculator
Condenser Relief Calculator
NOTE: This spreadsheet is intended to determine the condenser relief value for input into System Analyzer(TM). This spreadsheet requires that you have constant condenser temperature and condenser relief unloading curves and
- Select the appropriate sheet (10% Loads or NPLV) for the unloading curve and units that you have by clicking on the appropri - Input the constant condenser temperature unloading curve and constant condenser entering temperatures for the chiller in qu - Input the condenser relief unloading curves and subsequent condenser entering temperatures for the chiller in question. NOTE: The load percentages can be changed but all subsequent inputs must be changed to reflect it. NOTE: Only input data that you have. If you don't have data, leave that input field blank and that point will be ignored - The spreadsheet will calculate the condenser relief value for input into System Analyzer as well as the load and kW percentag NOTE: Within the programs, the unloading curve must be entered at constant condenser temperature. - If you have any questions please contact the C.D.S.(TM) Support Center. - User input field - Inputs for System Analyzer or TRACE - Calculation fields (not to be used)
into System Analyzer(TM). nser relief unloading curves and the condenser entering temperatures at all points.
you have by clicking on the appropriate button. ng temperatures for the chiller in question. ures for the chiller in question. nged to reflect it. nk and that point will be ignored. well as the load and kW percentages. nser temperature.
NOTE: All temperatures are expressed in degrees F NOTE: The Condenser Relief Modifier value is for direct input into System Analyzer and is expressed in units of perce
IP Units
Variable ECWT DeltaT 85 0 81 4 77 8 73 12 69 16 65 20 65 20 65 20 65 20 65 20 kW @ Variable ECWT 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Condenser Relief Modifier Ambient multiplier ----0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% 0.00% System Analyzer Input
NOTE: All temperatures are expressed in degrees F NOTE: The Condenser Relief Modifier value is for direct input into System Analyzer and is expressed in units of perce
NOTE: All temperatures are expressed in degrees C NOTE: The Condenser Relief Modifier value is for direct input into System Analyzer and is expressed in units of perce
SI Units
Variable ECWT DeltaT 29.4 0.0 27.2 2.2 25.0 4.4 22.8 6.7 20.6 8.9 18.3 11.1 18.3 11.1 18.3 11.1 18.3 11.1 18.3 11.1 kW @ Variable ECWT 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Condenser Relief Modifier Ambient multiplier ----0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 0.00% System Analyzer Input
NOTE: All temperatures are expressed in degrees C NOTE: The Condenser Relief Modifier value is for direct input into System Analyzer and is expressed in units of perce
Variable ECWT DeltaT 29.4 0.0 23.9 5.6 18.3 11.1 18.3 11.1