You are on page 1of 1

FXDQ63P7

or more (service space of installation box for adapter pcb)

or more (service space)

(suspension bolt pitch)

or more

or more (In case of bottom suction)

or more

Hole (suspension bolt pitch) or less Adjustable suspension bolt

Ceiling

SERVICE SPACE
Inspection door (Ceiling opening)

or more

VIEW A

Holes

Holes

IN CASE OF BACK SUCTION

Holes

IN CASE OF BOTTOM SUCTION

Nr 1 2 3 4 5 6 7 8 9 10 11

Name Liquid pipe connection Gas pipe connection Drain pipe connection Drain hose (accessory) Control box Transmission wiring connection Power supply connection Suspension Bracket Inspection Cover Socket for drain Air filter (Accessory)

Description 9.5 Flare connection 15.9 Flare connection VP20 (OD 26. ID 20) ID 25 (Outlet) -

3TW32954-1
NOTES

1. In case of back suction, mount chamber cover to bottom side of the unit. In case of bottom suction, mount chamber cover to back side of the unit. 2. Location of unit name plate: control box cover. 3. Mount the air filter at the suction side. (Use an air filter whose dust collecting efficiency is at least 50%. In a gravimetric technique). It can not be equipped with air filter (Accessory) when connecting duct to suction side.

You might also like