Professional Documents
Culture Documents
ANSYS Pin Loaded Simulation PG 5 PDF
ANSYS Pin Loaded Simulation PG 5 PDF
Comparison
Method theory Nodal loading using Cosine curve Nodal loading using half and full loads Pressure loading using surface effect elements Stresses MPa 27.000 26.530 28.436 26.737 Deflections mm ----0.003108 0.003323 0.003128
The above comparison shows a good agreement of the theory and FEA techniques for the simulation of the pin loaded lug. Among the FEA techniques method of Cosine curve and surface effect elements are very much accurate but the nodal loading using half and full loads is a bit wayward. However the pressure loading using surface effect elements is simple to apply.