Professional Documents
Culture Documents
M13 11.6 Isometric Production Ru
M13 11.6 Isometric Production Ru
13
PLEASE NOTE:
AVEVA has a policy of continuing product development: therefore, the information contained in this
document may be subject to change without notice.
AVEVA MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
While every effort has been made to verify the accuracy of this document, AVEVA shall not be liable
for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance or use of this material.
This manual provides documentation relating to products to which you may not have access or which
may not be licensed to you. For further information on which products are licensed to you please refer
to your licence conditions.
All rights reserved. No part of this document may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of AVEVA.
The software programs described in this document are confidential information and proprietary products of AVEVA Ltd or its licensors.
Visit our website at http://www.AVEVA.com
13
1 .........................................................................................................................2
.............................................................................2
Isodraft .................................................................................................2
Standard Isometric .......................................................................................5
1 .....................................................................................................................6
13
1
1
Design ,
. Isodraft ,
.
Isodraft
, ,
( Data Consistansy).
, (
, ).
Design Isodraft : Design Modules lsodraft Macro files.
13
Isodraft Members,
Design.
Isodraft
.
, .
Isodraft
Members ( 80-B-7). lsometric
Standard.
13
Standard Isometric.
4 ,
. BASIC.MET. Apply
.
13
Standard Isometric
CE (current element )
,
.
Isodraft Members CE
.
Apply
.
,
: Project (
), Company (
), Local (
).
Comments
Standard iso option
. ADVANCED
Spooler.
Detail
. Current Element
.
Detail list
Isodraft Detail List.
,
.
13
Produce ,
: Isometrics
,
; Transfer files
; Batch macro
,
); Bolt Report
.
1
, . ,
Isodraft.
13