Professional Documents
Culture Documents
UMTS
UE
RRC
Node B
RACH : RRC connection request
SRNC
RRC RNTI allocation, selection of L1, L2 parameters in the radio interface
CN
Radio Link Setup (set-up a DCH for signalling transfer) NBAP NBAP Radio Link Setup Response NBAP NBAP
ALCAP: Set-up a data bearer in Iub interface DCH-FP DCH-FP RRC RRC Downlink synchronisation Uplink synchronisation DCH-FP DCH-FP RRC RRC RRC RANAP Direct transfer (other NAS messages) DCH : Downlink/Uplink direct transfer (other NAS messages) RRC RANAP RRC RAB Assignment Request RANAP L1, L2, and data bearer configuration in Iu interface ALCAP: Set-up a data bearer in Iu interface (only for CS services) Radio Link Reconfiguration Prepare RANAP RANAP
FACH: RRC connection setup DCH: RRC connection setup complete DCH: UE initial direct transfer (1st NAS message)
RRC
DCH-FP DCH-FP
DCH-FP DCH-FP
Radio Link Reconfiguration Commit NBAP RRC DCH: Radio Bearer Setup Physical layer configuration following the instructions of the SRNC RRC DCH: Radio Bearer Setup Complete RRC RANAP RAB Assignment Response RANAP NBAP RRC
A RAB is now set-up and the UE can start sending/receiving user data to/from the CN