Professional Documents
Culture Documents
This simple circuit is nonlinear passive on low pass frequency filter. It s small size and easy to made for do not used the external power supply, but refuse a lot of noise ripples and need to a input voltage is stable. The circuit works best, when the signal level is importantly higher than the constant ripple level. The circuit has specifically related to two peak-detecting sample-and-hold circuits in tandem with a voltage average.
There are parts in figure a few : D1-D4=1N4148, C1=100uF electrolytic ,C2 2.2uF ceramic, R1 -100K I hope this circuit are a little ideas your, to a big project next time. 60Hz Notch Filter by LM741 In sometimes when want to decrease especial frequency noise that want only. This circuit can help you , it does will not let 60HZ frequencies s can change. Then decrease the noise. By use the integrated circuit , 741 numbers highly
popular , economize and dont seek buy easy with , if , friends , want to filter especial which frequency the one frequency. As a result change the value RC see the detail has added in the circuit sir.