Professional Documents
Culture Documents
Trampas Env - Rec.2
Trampas Env - Rec.2
T. D. Williamson, Inc. Bulletin No: 5000.001.00 Date: February 1999 Cross Indexing No: n/a Supersedes: 351.0 (3/1/83)
T.D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting, and meeting your individual application needs. TDW Systems can provide: Increased length to accommodate corrosion inspection pigs Weld beveled outlets Internal trays Special materials Other codes such as ASME 31.3, ASME Section VIII, European Vertical supports Vertical units Launcher/Receiver combination
Description
TDW designs and manufactures Pig Launchers and Receivers for pipelines of all sizes and pressure ratings for both gas and liquid service. Our standard design will accommodate most types, including displacement, batching and cleaning pigs. The TDW standard design is capable of launching one pig and receiving two pigs. Both Launchers and Receivers are equipped with TDW closures. All units are equipped with properly sized and located nozzles to allow the proper pig launching or pig receiving.
Features
TDW incorporates several important features in our standard Launchers and Receivers. Some of these are: TDW closures, threaded type on barrel sizes up to 10, and clamp-ring type on larger sizes A TDW PIG-SIG on all Receivers. An eccentric reducer on all Launchers to assure proper pig line up. Properly sized and located vent, gauge, drain, kicker or bypass nozzles. All welds are 100% inspected. Mill test certificates furnished. Designed to the ASME B31.4 or ASME B31.8 codes. All units are sandblasted and primer coated. Hydrostatically tested.
Purge connections Extreme temperatures and chemical applications In addition to Launchers and Receivers, TDW can provide complete launching and receiving systems which may include skidmounted support structure, valves, bypass piping, pig handling equipment, and batching, displacement, or cleaning pigs.
Toll Free
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
G B A
H L M
(Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
G B A
(Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
G B A
H L M
(Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
G B A
(Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
G B A H L M
NOTE: TDW threaded type closures are used on barrel sizes up to 14. TDW clamp ring type closures are used on all barrels 16 and larger. For sizes and pressure ratings not listed, consult the factory. (Available in ASME 150 LB. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
G B A H L M
NOTE: TDW threaded type closures are used on barrel sizes up to 14. TDW clamp ring type closures are used on all barrels 16 and larger. For sizes and pressure ratings not listed, consult the factory. (Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
E D
G B A
H L M
NOTE: TDW threaded type closures are used on barrel sizes up to 14. TDW clamp ring type closures are used on all barrels 16 and larger. For sizes and pressure ratings not listed, consult the factory. (Available in ASME 150 LB. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA
T. D. Williamson, Inc.
N J K
E D
G B A H L M
NOTE: TDW threaded type closures are used on barrel sizes up to 14. TDW clamp ring type closures are used on all barrels 16 and larger. For sizes and pressure ratings not listed, consult the factory. (Available in ASME 150 Lb. through 1500 Lb.) All dimensions are approximate and shown in inches.
918-447-5400
Fax: 918-664-7091
www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright 1999. All rights reserved T. D. Williamson, Inc. / Printed in USA