Professional Documents
Culture Documents
Logo Siemens (Analogue Module Manual)
Logo Siemens (Analogue Module Manual)
6 1
L+ M
4 4
3 35
RUN/STOP
8
PE
2 36 53
1 2 3 4
PE terminal for ground and shielding termination of the analog measurement line.
90
S 12 V S 24 V
Electrical isolation Reverse polarity protection PE terminal Sensor inputs Number Type Sensor connection
LOGO! AM2 PT100 Setting of the measurement value display on the basic module:
Offset: 200, Gain: 25 Offset: 200, Gain: 250 Offset: 128, Gain: 45 Offset: 128, Gain: 450
no 1.1 mA depends on the assembly typically 50 ms 0.25 C of the measurement limit value: +/1.0 % +/1.5 % no 10 m 55 Hz
3-wire technique
L+ M L+ M
RUN/STOP
RUN/STOP
PE
PE
Pt100
Pt100
Note Operation of the LOGO! expansion module AM2 PT100 on an ungrounded (floating potential) power supply may result in severe fluctuation of the displayed temperature value. In this case connect the negative output / power supply ground to the shielded measurement cables of the thermocouple.