Professional Documents
Culture Documents
Bar Splicing
Bar Splicing
SPLICING
SPLICELENGTH Splice lengths to be detailed on plans: 1) Bars larger than #8. 2) All top bars (condition 0)
I .
3) All bundled bars. 4) Column reinforcing. 5) All bars where more than half the bars in a given section are spliced within a required lap length (see Article 1.5.22 (B) of AASHTO) and the calculated lap length exceeds that shown for condition@.
(b) *I4
AND *I8
splice by welding ar mechanical butt splices. Lap splices should not be permitted,
2. BUNDLED BAR SPLICE - LENGTHS same splice length as for 2 bar bundles
3 bar bundles 4 bar bundles 1.2 times 1.33 I8 lap length l
Figure
H 411