Professional Documents
Culture Documents
002
Technical Specifications
CPE 135 A
CHEMICAL NAME: CAS NUMBER:
SPECIFICATIONS CHLORINE CONTENT: HEAT STABLE TIME (165C min): VOLATILE MATTER CONTENT: REMAINS CRYSTALLINITY: TEARING STRENGHT: RESIDUE ON 0.441 bore diameter: SIEVE 0.356 bore diameter: SHORE HARDNESS: Ca CONTENT: APPARENT DENSITY: IMPURITY PARTICLE: WHITENESS (R457):
PROPERTIES: It has fine multiple physical with good low-temperature flexibility and better tearing strength. Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the condition of right processing, it can form a network composition inside of the hard PVC finish products and give them good normal, low-temperature flexibility and impact strength.
APPLICATION: Mainly used for producing PVC profiles, U-PVC waterpipe and sewer pipe, cold curved pipe line, PVC blowing board and PVC extrusion board.
Amik Italia S.p.a -Sede Legale e Amministrativa : Via Fantoli, 5/7 - 20138 Milano - Tel. 02 / 507292.1 - Telefax 02 / 5063361 www.amikitalia.com e-mail amik@amikitalia.it
Cap.soc. Euro 2.800.000 - C.C.I.A.A. 943975 - I.T. Milano 170899 Reg.Vol. 5019 - Cod.Fisc. e Partita IVA n.03212480150