Professional Documents
Culture Documents
Applications
I
Versatile use for primary and secondary deinking otation as well as ltrate otation
General technological assessment of full-scale mill otation systems Process optimization in the laboratory, thus avoiding cost-intensive full-scale trials in the mill
Preliminary trials in the laboratory for minimizing process risks at production changes
On the run monitoring of otation efciency in the mill Research and development work
Features
I I
Self-suction aeration rotor Magnetic coupling between drive and rotor, no sealing required since shaft does not enter otation tank
I I
Automatic foam removal Universal drive with rotor speed independent of supply voltage and frequency
The technological results of the otation process depend on furnish, chemicals used and the process itself. Process variables are the air content, aeration intensity and frequency, stock consistency, loss rate and dwell time. With so many parameters of inuence, economic process optimization is only possible on a laboratory scale.
High efciency with low solids and bre losses, hence the otation characteristics directly relate to fullscale mill operation
High reproducibility
Voith Paper Fiber Systems GmbH & Co. KG Escher-Wyss-Strae 25 88212 Ravensburg / Germany Tel. +49 751 83 01 Fax +49 751 83 20 50 Voith Paper Inc. 2200 N. Roemer Road Appleton, WI 54911 / USA Tel. +920 731 77 24 Fax +920 731 02 40 Voith Paper S.A. Rua Friedrich von Voith, 825 02995-000 So Paulo-SP / Brazil Tel. +011 39 44 43 54 Fax +011 39 44 48 48
Foam outlet
Sampling valve
Aeration rotor
Technical data
VPR-PB-07-0002-GB-02 Subject to alteration!
Height Tank diameter Weight empty Cell capacity Supply voltage Supply frequency Power consumption